Publications
Below you find a non exhaustive list of publications from the High Performance Ceramics Laboratory (newest first).
For an exhaustive list with advanced search options, please refer to the DORA library.
Aegerter, D.; Fabbri, E.; Borlaf, M.; Yüzbasi, N. S.; Diklić, N.; Clark, A. H.; Romankov, V.; Piamonteze, C.; Dreiser, J.; Huthwelker, T.; et al. Delving into Fe-content effects on surface reconstruction of Ba0.50Sr0.50Co1−xFexO3−δ for the oxygen evolution reaction. J. Mater. Chem. A 2024, 12 (9), 5156-5169. https://doi.org/10.1039/d3ta06156f
Barough, V.; Jamilpanah, L.; Zare, M.; Ghanaatshoar, M.; Mohseni, S. M. Skin-effect-mediated magnetoionic control of charge transport in thick layers. Sci. Rep. 2024, 14 (1), 3332 (7 pp.). https://doi.org/10.1038/s41598-024-53970-9
Beall, C. E.; Fabbri, E.; Clark, A. H.; Meier, V.; Yüzbasi, N. S.; Sjølin, B. H.; Castelli, I. E.; Aegerter, D.; Graule, T.; Schmidt, T. J. Time-resolved oxidation state changes are key to elucidating the bifunctionality of perovskite catalysts for oxygen evolution and reduction. Energy & Environ. Mater. 2024. https://doi.org/10.1002/eem2.12737
Blugan, G.; Kovalska, N.; Knozowski, D.; Sasikumar, P. V. W.; Malfait, W. J.; Paz, S.; Madajski, P.; Leśniewski, M.; Sawczak, M.; Santhosh, B.; et al. Polymer derived SiOC/Sn nanocomposites from a low-cost single source precursor as anode materials for lithium storage applications. J. Energy Storage 2024, 89, 111676 (11 pp.). https://doi.org/10.1016/j.est.2024.111676
Bora, D. K. Fe2+ /Fe3+ sites control dicarboxylic acid adsorption on iron oxide nanoparticle surfaces for photocatalytic application studied by operando ATR-FTIR spectroscopy. Catal. Lett. 2024, 154, 2171-2181. https://doi.org/10.1007/s10562-023-04464-2
Braun, A. X-Ray studies on electrochemical systems. Synchrotron methods for energy materials; De Gruyter Textbook; De Gruyter: Berlin, 2024; 492 p.
Chen, Q.; Künniger, T.; Song, Q.; Zhang, K.; Chumakov, A.; Bulut, Y.; Harder, C.; Müller‐Buschbaum, P.; Roth, S. V.; Braun, A. Hygro‐dynamic and conductive actuator that restructures and heals by water. Adv. Funct. Mater. 2024. https://doi.org/10.1002/adfm.202402924
Clemens, F.; Sarraf, F.; Eckey, L. Extrusion based additive manufacturing of polymer derived ceramics. In Eighteenth European inter-regional conference on ceramics "CIEC-18", presented at the 18th European inter-regional conference on ceramics "CIEC-18", Vevey, Februar 5-7, 2024; 2024; pp 1-5.
Costi, L.; Georgopoulou, A.; Mondal, S.; Iida, F.; Clemens, F. 3D printable self-sensing magnetorheological elastomer. Macromol. Mater. Eng. 2024, 309 (2), 2300294 (14 pp.). https://doi.org/10.1002/mame.202300294
Du, P.; Zhu, H.; Braun, A.; Yelon, A.; Chen, Q. Entropy and isokinetic temperature in fast ion transport. Adv. Sci. 2024, 11 (2), 2305065 (8 pp.). https://doi.org/10.1002/advs.202305065
Du, X.; Zhou, Y.; Schümperlin, D.; Laganenka, L.; Lee, S. S.; Blugan, G.; Hardt, W. D.; Persson, C.; Ferguson, S. J. Fabrication and characterization of sodium alginate-silicon nitride-PVA composite biomaterials with damping properties. J. Mech. Behav. Biomed. Mater. 2024, 155, 106579 (11 pp.). https://doi.org/10.1016/j.jmbbm.2024.106579
Georgopoulou, A.; Filippi, M.; Stefani, L.; Drescher, F.; Balciunaite, A.; Scherberich, A.; Katzschmann, R.; Clemens, F. Bioprinting of stable bionic interfaces using piezoresistive hydrogel organoelectronics. Adv. Healthc. Mater. 2024, 2400051 (13 pp.). https://doi.org/10.1002/adhm.202400051
Georgopoulou, A.; Eckey, L. M.; Clemens, F. Soft chemiresistive sensing shields soft robotic actuators from mechanical degradation due to critical solvent exposure. Adv. Eng. Mater. 2024, 26 (10), 2301723 (10 pp.). https://doi.org/10.1002/adem.202301723
Hadian, A.; Duckek, J.; Parrilli, A.; Liersch, A.; Clemens, F. Additive manufacturing of fiber-reinforced zirconia-toughened alumina ceramic matrix composites by material extrusion-based technology. Adv. Eng. Mater. 2024, 2302158 (13 pp.). https://doi.org/10.1002/adem.202302158
Huang, J.; Hales, N.; Clark, A. H.; Yüzbasi, N. S.; Borca, C. N.; Huthwelker, T.; Schmidt, T. J.; Fabbri, E. Operando tracking the interactions between CoOx and CeO2 during oxygen evolution reaction. Adv. Energy Mater. 2024, 14 (11), 2303529 (10 pp.). https://doi.org/10.1002/aenm.202303529
Huang, J.; Borca, C. N.; Huthwelker, T.; Yüzbasi, N. S.; Baster, D.; El Kazzi, M.; Schneider, C. W.; Schmidt, T. J.; Fabbri, E. Surface oxidation/spin state determines oxygen evolution reaction activity of cobalt-based catalysts in acidic environment. Nat. Commun. 2024, 15, 3067 (9 pp.). https://doi.org/10.1038/s41467-024-47409-y
Huangfu, S.; Austin, A. C.; Guguchia, Z.; Fjellvåg, Ø. S.; Knorpp, A. J.; Luetkens, H.; Schilling, A.; Stuer, M. Tuneable short-range antiferromagnetic correlation in Fe-containing entropy stabilized oxides. Inorg. Chem. 2024, 63 (1), 247-255. https://doi.org/10.1021/acs.inorgchem.3c03028
Ichangi, A.; Bergamini, A.; Clemens, F. Chemical modification of lead zirconate titanate piezoceramics through cold-sintering process. J. Alloys Compd. 2024, 988, 174282 (9 pp.). https://doi.org/10.1016/j.jallcom.2024.174282
Ichangi, A.; Derichsweiler, C.; Mathur, S.; Clemens, F. Electrospun (K,Na)NbO3 piezoceramic fibers for self-powered tactile sensing application. Adv. Eng. Mater. 2024, 26 (1), 230166 (10 pp.). https://doi.org/10.1002/adem.202301066
Marelli, E.; Lyu, J.; Morin, M.; Leménager, M.; Shang, T.; Yüzbasi, N. S.; Aegerter, D.; Huang, J.; Daffé, N. D.; Clark, A. H.; et al. Cobalt-free layered perovskites RBaCuFeO5+δ (R = 4f lanthanide) as electrocatalysts for the oxygen evolution reaction. EES Catalysis 2024, 2, 335-350. https://doi.org/10.1039/D3EY00142C
Mondal, S.; Kwaśniowski, M.; Georgopoulou, A.; Sapiński, B.; Graule, T.; Clemens, F. Soft magnetoactive morphing structures with self-sensing properties, using multi-material extrusion additive manufacturing. In Industrializing additive manufacturing. Proceedings of AMPA2023, presented at the AMPA 2023: International conference on additive manufacturing in products and applications, Zurich, September 12-14, 2023; Klahn, C., Meboldt, M., Ferchow, J., Eds.; Springer tracts in additive manufacturing; Springer: Cham, 2024; pp 365-386. https://doi.org/10.1007/978-3-031-42983-5_25
Promsung, R.; Chuaybamrung, A.; Georgopoulou, A.; Clemens, F.; Nakaramontri, Y.; Johns, J.; Lehman, N.; Songtipya, L.; Kalkornsurapranee, E. Rapid formation of carbon nanotubes–natural rubber films cured with glutaraldehyde for reducing percolation threshold concentration. Discov. Nano 2024, 19 (1), 30 (14 pp.). https://doi.org/10.1186/s11671-024-03970-5
Rosado, E.; Moreno, R.; Graule, T.; Stuer, M. Manufacture of zircon bulk parts and scaffolds by digital light processing. Open Ceram. 2024, 17, 100536 (10 pp.). https://doi.org/10.1016/j.oceram.2023.100536
Sarkar, K.; Dutta, M.; Mondal, R.; Dey, S.; Majumder, S.; Sepay, N.; Halder, U. C.; Kumar, S. Influences of morphology, cation distribution and surface spin canting on magnetic and hyperfine properties of mechanically activated and subsequently heat treated nanosized Co0.8Zn0.2Fe2O4 exhibiting excellent catalytic activity. Mater. Today Comm. 2024, 39, 108953 (16 pp.). https://doi.org/10.1016/j.mtcomm.2024.108953
Sarraf, F.; Hadian, A.; Gfeller, F.; Churakov, S. V.; Clemens, F. Crosslinking and pyrolysis of a methyl-silsesquioxane: effect of heating rate on fabrication of polymer derived mullite ceramics using thermoplastic shaping. Mater. Des. 2024, 237, 112578 (13 pp.). https://doi.org/10.1016/j.matdes.2023.112578
Stoyanova, S.; Ivanov, E.; Hegde, L. R.; Georgopoulou, A.; Clemens, F.; Bedoui, F.; Kotsilkova, R. PVDF hybrid nanocomposites with graphene and carbon nanotubes and their thermoresistive and joule heating properties. Nanomaterials 2024, 14 (11), 901 (18 pp.). https://doi.org/10.3390/nano14110901
Thakur, T.; Carretta, M.; Komissarenko, D.; Blugan, G. Advancements in DLP 3D printing: high strength alumina toughened zirconia ceramics for biomedical applications. Open Ceram. 2024, 18, 100601 (12 pp.). https://doi.org/10.1016/j.oceram.2024.100601
Yuan, S. ‐Y.; Li, T. ‐T.; Cui, J. ‐Y.; Sun, J. ‐K.; Gong, Y. ‐S.; Braun, A.; Liu, H.; Wang, J. ‐J. Unlocking the potential of hematite photoanodes in acidic electrolytes: boosting performance with ultra‐small IrO x nanoparticles for efficient water splitting. EcoEnergy 2024, 2 (2), 322-335. https://doi.org/10.1002/ece2.41
Zare, M.; Jamilpanah, L.; Sadeghi, A.; Ghanaatshoar, M.; Mohseni, M. Enhancing magnetoimpedance response by anisotropic surface-charge accumulation. J. Magn. Magn. Mater. 2024, 593, 171838 (8 pp.). https://doi.org/10.1016/j.jmmm.2024.171838
Zare, M.; Jamilpanah, L.; Barough, V.; Sadeghi, A.; Ghanaatshoar, M.; Mohseni, M. Role of electrospun fibers coated on magnetoimpedance effect of Co-based ribbons. Appl. Phys. A 2024, 130 (2), 90 (8 pp.). https://doi.org/10.1007/s00339-023-07236-2
Zubrzycka, P.; Radecka, M.; Graule, T.; Trenczek-Zając, A.; Zientara, D.; Stuer, M. MgAl2O4 spinel with transmittance approaching theoretical value at reduced sintering temperatures. J. Eur. Ceram. Soc. 2024, 44 (10), 6047-6059. https://doi.org/10.1016/j.jeurceramsoc.2024.03.049
Aegerter, D.; Fabbri, E.; Yüzbasi, N. S.; Diklić, N.; Clark, A. H.; Nachtegaal, M.; Piamonteze, C.; Dreiser, J.; Huthwelker, T.; Graule, T.; et al. Co1-xFexOy oxygen evolution nanocatalysts: on the way to resolve (electro)chemically triggered surface-bulk discrepancy. ACS Catal. 2023, 13, 15899-15909. https://doi.org/10.1021/acscatal.3c04138
Azami, M.; Siahsarani, A.; Hadian, A.; Kazemi, Z.; Rahmatabadi, D.; Kashani-Bozorg, S. F.; Abrinia, K. Laser powder bed fusion of alumina/Fe-Ni ceramic matrix particulate composites impregnated with a polymeric resin. J. Mater. Res. Technol. 2023, 24, 3133-3144. https://doi.org/10.1016/j.jmrt.2023.03.181
Bartasyte, A.; Clementi, G.; Micard, Q.; Labbaveettil, I.; Sousa Lopes Moreira, A.; Boujnah, S.; Ouhabaz, M.; Verma, A.; Ichangi, A.; Malandrino, G.; et al. Material strategies to enhance the performance of piezoelectric energy harvesters based on lead-free materials. J. Micromech. Microeng. 2023, 33 (5), 053001 (38 pp.). https://doi.org/10.1088/1361-6439/acbfc0
Beall, C. E.; Fabbri, E.; Clark, A. H.; Yüzbasi, N. S.; Graule, T.; Schmidt, T. J. Influence of carbon on the dynamic changes in Co oxidation state of Ba0.5Sr0.5Co0.8Fe0.2O3-δ perovskite catalyst during the oxygen reduction and evolution reactions. EcoMat 2023, 5 (7), e12353 (9 pp.). https://doi.org/10.1002/eom2.12353
Bevione, M.; Cecchini, I.; Garafalo, E.; Suslov, S. A.; Chiolerio, A. Colloidal technologies for heat energy recovery. In Heat energy recovery for industrial processes and wastes; Borge-Diez, D., Rosales-Asensio, E., Eds.; Green energy and technology; Springer: Cham, 2023; pp 49-104. https://doi.org/10.1007/978-3-031-24374-5_3
Bevione, M.; Chiolerio, A.; Tagliabue, G. Plasmonic nanofluids: enhancing photothermal gradients toward liquid robots. ACS Appl. Mater. Interfaces 2023, 15 (43), 50106-50115. https://doi.org/10.1021/acsami.3c06859
Clemens, F.; Sarraf, F.; Borzì, A.; Neels, A.; Hadian, A. Material extrusion additive manufacturing of advanced ceramics: towards the production of large components. J. Eur. Ceram. Soc. 2023, 43 (7), 2752-2760. https://doi.org/10.1016/j.jeurceramsoc.2022.10.019
Cé de Andrade, J.; Cabral, F.; Clemens, F. J.; Leite Vieira, J.; B.P. Soares, M.; Hotza, D.; Fredel, M. C. Effect of stearic acid on the mechanical and rheological properties of PLA/HA biocomposites. Mater. Today Comm. 2023, 35, 106357 (7 pp.). https://doi.org/10.1016/j.mtcomm.2023.106357
Georgopoulou, A.; Hamelryckx, S.; Junge, K.; Eckey, L. M.; Rogler, S.; Katzschmann, R.; Hughes, J.; Clemens, F. A multi-material robotic finger with integrated proprioceptive and tactile capabilities produced with a circular process. In 2023 IEEE 6th international conference on soft robotics (RoboSoft 2023), presented at the 2023 IEEE 6th international conference on soft robotics (RoboSoft 2023), Singapore, Singapore, April 3-7, 2023; IEEE: Danvers, MA, 2023; p (6 pp.). https://doi.org/10.1109/RoboSoft55895.2023.10122054
Georgopoulou, A.; Eckey, L. M.; Clemens, F. A prosthetic hand with integrated sensing elements for selective detection of mechanical and thermal stimuli. Adv. Intell. Syst. 2023, 5 (10), 2300122 (9 pp.). https://doi.org/10.1002/aisy.202300122
Georgopoulou, A.; Hardman, D.; Thuruthel, T. G.; Iida, F.; Clemens, F. Sensorized skin with biomimetic tactility features based on artificial cross-talk of bimodal resistive sensory inputs. Adv. Sci. 2023, 10 (30), 2301590 (11 pp.). https://doi.org/10.1002/advs.202301590
Georgopoulou, A.; Diethelm, P.; Wagner, M.; Spolenak, R.; Clemens, F. Soft self-regulating heating elements for thermoplastic elastomer-based electronic skin applications. 3D Print. Addit. Manuf. 2023. https://doi.org/10.1089/3dp.2022.0242
Georgopoulou, A.; Srisawadi, S.; Wiroonpochit, P.; Clemens, F. Soft wearable piezoresistive sensors based on natural rubber fabricated with a customized vat-based additive manufacturing process. Polymers 2023, 15 (10), 2410 (14 pp.). https://doi.org/10.3390/polym15102410
Ghosh, S.; Majumder, S.; Banerjee, S. Transition metal oxide assisted quaternary nanoarchitectonics based composite towards enhanced electrochemical energy storage performance. Appl. Phys. A 2023, 129 (5), 384 (11 pp.). https://doi.org/10.1007/s00339-023-06661-7
Hadian, A.; Morath, B.; Biedermann, M.; Meboldt, M.; Clemens, F. Selected design rules for material extrusion-based additive manufacturing of alumina based nozzles and heat exchangers considering limitations in printing, debinding, and sintering. Addit. Manuf. 2023, 75, 103719 (8 pp.). https://doi.org/10.1016/j.addma.2023.103719
Huangfu, S.; Guguchia, Z.; Shang, T.; Lin, H.; Liu, H.; Zhang, X.; Luetkens, H.; Schilling, A. Competing spin-glass and spin-fluctuation states in NdxPr4-xNi3O8. Phys. Rev. B 2023, 108 (1), 014410 (10 pp.). https://doi.org/10.1103/PhysRevB.108.014410
Huebner, J.; Pfeiffer, S.; Rutkowski, P.; Wójcik, Ł.; Kata, D.; Graule, T. Spray drying as a one-step production method of SiC-based granulates for direct reactive laser sintering of Reaction Bonded Silicon Carbide (RBSiC). Open Ceram. 2023, 16, 100492 (10 pp.). https://doi.org/10.1016/j.oceram.2023.100492
Jamilpanah, L.; Chiolerio, A.; Crepaldi, M.; Adamatzky, A.; Mohseni, M. Proposing magnetoimpedance effect for neuromorphic computing. Sci. Rep. 2023, 13, 8635 (7 pp.). https://doi.org/10.1038/s41598-023-35876-0
Karuppiah, D.; Komissarenko, D.; Yüzbasi, N. S.; Liu, Y.; Warriam Sasikumar, P. V.; Hadian, A.; Graule, T.; Clemens, F.; Blugan, G. A facile two-step thermal process for producing a dense, phase-pure, cubic Ta-doped lithium lanthanum zirconium oxide electrolyte for upscaling. Batteries 2023, 9 (11), 554 (11 pp.). https://doi.org/10.3390/batteries9110554
Knorpp, A. J.; Allegri, P.; Huangfu, S.; Vogel, A.; Stuer, M. Synthesis and characterization of high-entropy dawsonite-type structures. Inorg. Chem. 2023, 62 (12), 4999-5007. https://doi.org/10.1021/acs.inorgchem.3c00179
Komissarenko, D.; Roland, S.; Seeber, B. S. M.; Graule, T.; Blugan, G. DLP 3D printing of high strength semi-translucent zirconia ceramics with relatively low-loaded UV-curable formulations. Ceram. Int. 2023, 49 (12), 21008-21016. https://doi.org/10.1016/j.ceramint.2023.03.236
Kovalska, N.; Mulone, A.; Sort, J.; Klement, U.; Blugan, G.; Hansal, W.; Kautek, W. Electrodeposition of soft magnetic Fe-W-P alloy coatings from an acidic electrolyte. Coatings 2023, 13 (4), 801 (10 PP.). https://doi.org/10.3390/coatings13040801
Kozielski, L.; Bochenek, D.; Clemens, F.; Sebastian, T. Magnetoelectric composites: engineering for tunable filters and energy harvesting applications. Appl. Sci. 2023, 13 (15), 8854 (13 pp.). https://doi.org/10.3390/app13158854
Liu, W.; Feng, J.; Wei, T.; Liu, Q.; Zhang, S.; Luo, Y.; Luo, J.; Liu, X. Active-site and interface engineering of cathode materials for aqueous Zn—gas batteries. Nano Res. 2023, 16 (2), 2325-2346. https://doi.org/10.1007/s12274-022-4929-7
Liu, H.; Huangfu, S.; Lin, H.; Zhang, X.; Schilling, A. Superconductivity in hydrated Lix(H2O)yTaS2. J. Mater. Chem. C 2023, 11 (10), 3553-3561. https://doi.org/10.1039/d2tc04353j
Lugovy, M.; Bondar, M.; Orlovskaya, N.; Reece, M. J.; Graule, T.; Blugan, G. Time dependent deformation of LaCoO3 based perovskites at different temperatures: ferroelastic and non-ferroelastic creep behaviour. Adv. Appl. Ceram. 2023, 122 (5-8), 295-310. https://doi.org/10.1080/17436753.2023.2262277
Lusiola, T.; Ichangi, A.; Weil, D.; Sebastian, T.; Aneziris, C.; Graule, T.; Clemens, F. Electrospinning of ZrO2 fibers without sol-gel methods: effect of inorganic Zr-source on electrospinning properties and phase composition. Open Ceram. 2023, 13, 100324 (8 pp.). https://doi.org/10.1016/j.oceram.2022.100324
Makowska, M. G.; Verga, F.; Pfeiffer, S.; Marone, F.; Chang, C. S. T.; Florio, K.; Schlepütz, C. M.; Wegener, K.; Graule, T.; Van Petegem, S. Operando tomographic microscopy during laser-based powder bed fusion of alumina. Commun. Mater. 2023, 4 (1), 73 (15 pp.). https://doi.org/10.1038/s43246-023-00401-3
Mondal, S.; Katzschmann, R.; Clemens, F. Magnetorheological behavior of thermoplastic elastomeric honeycomb structures fabricated by additive manufacturing. Composites B 2023, 252, 110498 (12 pp.). https://doi.org/10.1016/j.compositesb.2023.110498
Naikade, M.; Hain, C.; Kastelik, K.; Parrilli, A.; Graule, T.; Weber, L.; Ortona, A. Liquid metal infiltration of silicon based alloys into porous carbonaceous materials Part-III: experimental verification of conversion products and infiltration depth by infiltration of Si-Zr alloy into mixed SiC/graphite preforms. J. Eur. Ceram. Soc. 2023, 43 (1), 47-53. https://doi.org/10.1016/j.jeurceramsoc.2022.09.036
Pfeiffer, S.; Florio, K.; Makowska, M.; Aneziris, C. G.; Van Swygenhoven, H.; Wegener, K.; Graule, T. Crack-reduced laser powder bed fused oxide ceramic parts by in-situ synthesis of negative thermal expansion phases. J. Eur. Ceram. Soc. 2023, 44 (2), 1012-1026. https://doi.org/10.1016/j.jeurceramsoc.2023.09.040
Saidov, K.; Razzokov, J.; Parpiev, O.; Sena Yüzbasi, N.; Kovalska, N.; Blugan, G.; Ruzimuradov, O. Formation of highly conductive interfaces in crystalline ionic liquid-gated unipolar MoTe2/h-BN field-effect transistor. Nanomaterials 2023, 13 (18), 2559 (10 pp.). https://doi.org/10.3390/nano13182559
Sarraf, F.; Hadian, A.; Churakov, S. V.; Clemens, F. EVA-PVA binder system for polymer derived mullite made by material extrusion based additive manufacturing. J. Eur. Ceram. Soc. 2023, 43 (2), 530-541. https://doi.org/10.1016/j.jeurceramsoc.2022.10.009
Sarraf, F.; Churakov, S. V.; Clemens, F. Preceramic polymers for additive manufacturing of silicate ceramics. Polymers 2023, 15 (22), 4360 (29 pp.). https://doi.org/10.3390/polym15224360
Sripornsawat, B.; Georgopoulou, A.; Tulaphol, S.; Thitithammawong, A.; Johns, J.; Nakaramontri, Y.; Clemens, F. Use of modified deep eutectic solvent as an additional chemical in a flexible conductive natural rubber sensor for motion analysis. eXPRESS Polym. Lett. 2023, 17 (1), 69-89. https://doi.org/10.3144/expresspolymlett.2023.6
Stosz, M.; Narayanasamy, S.; Bell, J.; Graule, T.; Kata, D.; Blugan, G. Joining of alumina ceramics with Ti and Zr interlayers by spark plasma sintering. Mater. Des. 2023, 227, 111724 (8 pp.). https://doi.org/10.1016/j.matdes.2023.111724
Ud Din, M. A.; Idrees, M.; Jamil, S.; Irfan, S.; Nazir, G.; Mudassir, M. A.; Saleem, M. S.; Batool, S.; Cheng, N.; Saidur, R. Advances and challenges of methanol-tolerant oxygen reduction reaction electrocatalysts for the direct methanol fuel cell. J. Energy Chem. 2023, 77, 499-513. https://doi.org/10.1016/j.jechem.2022.11.023
Wagner, M. A.; Ocana-Pujol, J. L.; Hadian, A.; Clemens, F.; Spolenak, R. Filament extrusion-based additive manufacturing of NiTi shape memory alloys. Mater. Des. 2023, 225, 111418 (12 pp.). https://doi.org/10.1016/j.matdes.2022.111418
Yoshimune, W.; Falqueto, J. B.; Clark, A. H.; Yüzbasi, N. S.; Graule, T.; Baster, D.; El Kazzi, M.; Schmidt, T. J.; Fabbri, E. The role of phosphate functionalization on the oxygen evolution reaction activity of cobalt‐based oxides at different pH values. Small Struct. 2023, 4 (12), 2300106 (10 pp.). https://doi.org/10.1002/sstr.202300106
Yüzbasi, N. S.; Graule, T.; Blugan, G. Stability assessment of alumina and SiC based refractories in a high temperature steam environment as potential thermal energy storage materials. Open Ceram. 2023, 16, 100472 (9 pp.). https://doi.org/10.1016/j.oceram.2023.100472
Zubrzycka, P.; Radecka, M.; Graule, T.; Stuer, M. Debinding of additively manufactured parts from spinel powders with particle sizes below 200 nm. Ceram. Int. 2023, 49 (7), 11355-11367. https://doi.org/10.1016/j.ceramint.2022.11.335
Bell, J. G.; Cavasin, N.; Knorpp, A.; Graule, T.; Stuer, M. BaTiO3-based thermistor hollow fibers prepared using a phase inversion spinning process for energy efficient gas sorption. J. Eur. Ceram. Soc. 2022, 42 (3), 981-992. https://doi.org/10.1016/j.jeurceramsoc.2021.10.049
Bell, J. G.; Graule, T.; Stuer, M. Tuning of the microstructural and electrical properties of undoped BaTiO3 by spark plasma sintering. Open Ceram. 2022, 9, 100244 (10 pp.). https://doi.org/10.1016/j.oceram.2022.100244
Bora, D. K.; Nadjafi, M.; Armutlulu, A.; Hosseini, D.; Castro-Fernández, P.; Toth, R. Photoelectrochemical glycerol oxidation on Mo-BiVO4 photoanodes shows high photocharging current density and enhanced H2 evolution. Energy Adv. 2022, 1 (10), 715-728. https://doi.org/10.1039/D2YA00077F
Braun, A.; Bora, D. K.; Lauterbach, L.; Lettau, E.; Wang, H.; Cramer, S. P.; Yang, F.; Guo, J. From inert gas to fertilizer, fuel and fine chemicals: N2 reduction and fixation. Catal. Today 2022, 387, 186-196. https://doi.org/10.1016/j.cattod.2021.04.020
Clemens, F. J.; Hadian, A.; Fricke, M. Material extrusion-based additive manufacturing for ceramics using thermoplastic feedstocks. cfi Ceram. Forum Int. 2022, 99 (4), 96-100.
Conzelmann, N. A.; Partl, M. N.; Clemens, F. J.; Müller, C. R.; Poulikakos, L. D. Effect of artificial aggregate shapes on the porosity, tortuosity and permeability of their packings. Powder Technol. 2022, 397, 117019 (11 pp.). https://doi.org/10.1016/j.powtec.2021.11.063
Costi, L.; Tagliabue, A.; Maiolino, P.; Clemens, F.; Iida, F. Magneto-active elastomer filter for tactile sensing augmentation through online adaptive stiffening. IEEE Robot. Autom. Lett. 2022, 7 (3), 5928-5933. https://doi.org/10.1109/LRA.2022.3160590
Drdova, S.; Giannakou, M.; Jiang, F.; Lin, L.; Sivaraman, D.; Toth, R.; Graule, T.; Braun, A.; Ilavsky, J.; Kuzmenko, I.; et al. Aerosol-assisted deposition for TiO2 immobilization on photocatalytic fibrous filters for VOC degradation. Front. Chem. 2022, 10, 887431 (17 pp.). https://doi.org/10.3389/fchem.2022.887431
Du, P.; Li, N.; Ling, X.; Fan, Z.; Braun, A.; Yang, W.; Chen, Q.; Yelon, A. Optimizing the proton conductivity with the isokinetic temperature in perovskite-type proton conductors according to Meyer–Neldel rule. Adv. Energy Mater. 2022, 12 (5), 2102939 (8 pp.). https://doi.org/10.1002/aenm.202102939
Du, X.; Lee, S. S.; Blugan, G.; Ferguson, S. J. Silicon nitride as a biomedical material: an overview. Int. J. Mol. Sci. 2022, 23 (12), 6551 (32 pp.). https://doi.org/10.3390/ijms23126551
Erat, S.; Braun, A.; Çetinkaya, S.; Yildirimcan, S.; Kasapoğlu, A. E.; Gür, E.; Harputlu, E.; Ocakoglu, K. Solution-processable growth and characterization of dandelion-like zno:B microflower structures. Crystals 2022, 12 (1), 11 (21 pp.). https://doi.org/10.3390/cryst12010011
Ferraris, M.; Gili, F.; Lizarralde, X.; Igartua, A.; Mendoza, G.; Blugan, G.; Gorjan, L.; Casalegno, V. SiC particle reinforced Al matrix composites brazed on aluminum body for lightweight wear resistant brakes. Ceram. Int. 2022, 48 (8), 10941-10951. https://doi.org/10.1016/j.ceramint.2021.12.313
França, D.; Siqueira, G.; Nyström, G.; Clemens, F.; Fonseca Souza, C.; Faez, R. Charged-cellulose nanofibrils as a nutrient carrier in biodegradable polymers for enhanced efficiency fertilizers. Carbohydr. Polym. 2022, 296, 119934 (12 pp.). https://doi.org/10.1016/j.carbpol.2022.119934
Georgopoulou, A.; Eckey, L. M.; Mondal, S.; Clemens, F. Case study of a rapid prototyping method for optimizing soft gripper structures with integrated piezoresistive sensors. In 2022 IEEE 5th international conference on soft robotics (RoboSoft 2022), presented at the 2022 IEEE 5th international conference on soft robotics (RoboSoft 2022), Edinburgh, United Kingdom, April 4-8, 2022; IEEE: Danvers, MA, 2022; pp 539-544. https://doi.org/10.1109/RoboSoft54090.2022.9762202
Georgopoulou, A.; Clemens, F. Pellet-based fused deposition modeling for the development of soft compliant robotic grippers with integrated sensing elements. Flex. Print. Electron. 2022, 7 (2), 025010 (13 pp.). https://doi.org/10.1088/2058-8585/ac6f34
Georgopoulou, A.; Eckey, L. M.; Clemens, F. Soft carbon-based multi-sensory resistive receptors. In Proceedings of the 20th European conference on composite materials. Composite meet sustainability, presented at the ECCM20 - 20th European conference on composite materials, Lausanne, Switzerland, June 26-30, 2022; Vassilopoulos, A. P., Michaud, V., Eds.; Life cycle assessment; Ecole Polytechnique Fédérale de Lausanne (EPFL): Lausanne, 2022; Vol. 6, pp 247-254.
Georgopoulou, A.; Brancart, J.; Terryn, S.; Bosman, A. W.; Norvez, S.; Van Assche, G.; Iida, F.; Vanderborght, B.; Clemens, F. Soft self-healing resistive-based sensors inspired by sensory transduction in biological systems. Appl. Mater. Today 2022, 29, 101638 (26 pp.). https://doi.org/10.1016/j.apmt.2022.101638
Georgopoulou, A.; Korhonen, H.; Bosman, A. W.; Clemens, F. Thermoplastic elastomer composite strips with damage detection capabilities for self-healing elastomers. Funct. Compos. Mater. 2022, 3 (1), 9 (16 pp.). https://doi.org/10.1186/s42252-022-00037-5
Gilshtein, E.; Pfeiffer, S.; Siegrist, S.; Vlnieska, V.; Graule, T.; Romanyuk, Y. E. Photonic sintering of oxide ceramic films: effect of colored FexOy nanoparticle pigments. Ceram. 2022, 5 (3), 351-361. https://doi.org/10.3390/ceramics5030027
Hadian, A.; Fricke, M.; Liersch, A.; Clemens, F. Material extrusion additive manufacturing of zirconia parts using powder injection molding feedstock compositions. Addit. Manuf. 2022, 57, 102966 (14 pp.). https://doi.org/10.1016/j.addma.2022.102966
Hagelüken, L.; Sasikumar, P. V. W.; Lee, H. Y.; Di Stadio, D.; Chandorkar, Y.; Rottmar, M.; Maniura-Weber, K.; Blugan, G.; Brugger, J. Multiscale 2D/3D microshaping and property tuning of polymer-derived SiCN ceramics. J. Eur. Ceram. Soc. 2022, 42 (5), 1963-1970. https://doi.org/10.1016/j.jeurceramsoc.2021.12.044
Hardman, D.; George Thuruthel, T.; Georgopoulou, A.; Clemens, F.; Iida, F. 3D printable soft sensory fiber networks for robust and complex tactile sensing. Micromachines 2022, 13 (9), 1540 (16 pp.). https://doi.org/10.3390/mi13091540
Jakob, L.; Camille, B. H.; Quentin-Arthur, P.; Antonia, G.; Frank, C.; François, T.; Sophie, N. Self-healing vitrimer composites for soft robotics. In Proceedings of the 20th European conference on composite materials. Composite meet sustainability, presented at the ECCM20 - 20th European conference on composite materials, Lausanne, Switzerland, June 26-30, 2022; Vassilopoulos, A. P., Michaud, V., Eds.; Life cycle assessment; Ecole Polytechnique Fédérale de Lausanne (EPFL): Lausanne, 2022; Vol. 6, pp 239-246.
Knorpp, A. J.; Bell, J. G.; Huangfu, S.; Stuer, M. From synthesis to microstructure: engineering the high-entropy ceramic materials of the future. Chimia 2022, 76 (3), 212-222. https://doi.org/10.2533/chimia.2022.212
Knorpp, A. J.; Zawisza, A.; Huangfu, S.; Borzì, A.; Clark, A. H.; Kata, D.; Graule, T.; Stuer, M. Hydrothermal synthesis of multi-cationic high-entropy layered double hydroxides. RSC Adv. 2022, 12 (40), 26362-26371. https://doi.org/10.1039/D2RA05435C
Knozowski, D.; Vallachira Warriam Sasikumar, P.; Madajski, P.; Blugan, G.; Gazda, M.; Kovalska, N.; Wilamowska-Zawłocka, M. Material design and optimisation of electrochemical Li-Ion storage properties of ternary silicon oxycarbide/graphite/Tin nanocomposites. Nanomaterials 2022, 12 (3), 410 (16 pp.). https://doi.org/10.3390/nano12030410
Knozowski, D.; Sasikumar, P. V. W.; Dubey, R.; Aebli, M.; Kravchyk, K. V.; Trykowski, G.; Kovalenko, M. V.; Graule, T.; Wilamowska-Zawłocka, M.; Blugan, G. Silicon oxycarbide-tin nanocomposite derived from a UV crosslinked single source preceramic precursor as high-performance anode materials for Li-ion batteries. Appl. Mater. Today 2022, 27, 101424 (10 pp.). https://doi.org/10.1016/j.apmt.2022.101424
Kollep, M.; Konstantinou, G.; Madrid-Wolff, J.; Boniface, A.; Hagelüken, L.; Sasikumar, P. V. W.; Blugan, G.; Delrot, P.; Loterie, D.; Brugger, J.; et al. Tomographic volumetric additive manufacturing of silicon oxycarbide ceramics. Adv. Eng. Mater. 2022, 24 (7), 2101345 (10 pp.). https://doi.org/10.1002/adem.202101345
Langenbach, J.; Bakkali-Hassani, C.; Poutrel, Q. A.; Georgopoulou, A.; Clemens, F.; Tournilhac, F.; Norvez, S. Adhesion and stiffness matching in epoxy-vitrimers/strain sensor fiber laminates. ACS Appl. Polym. Mater. 2022, 4 (2), 1264-1275. https://doi.org/10.1021/acsapm.1c01648
Levy, I. K.; Owussu, F.; Geiger, T.; Clemmens, F.; Nüesch, F.; Opris, D. M.; Negri, R. M. Dielectric properties of 3-3 flexible composites by infiltration of elastomers into porous ceramic structures using cellulose scaffold. Eur. Polym. J. 2022, 180, 111616 (10 pp.). https://doi.org/10.1016/j.eurpolymj.2022.111616
Liu, S.; Zhou, Y.; Zhou, J.; Tang, H.; Gao, F.; Zhao, D.; Ren, J.; Wu, Y.; Wang, Z.; Luo, Y.; et al. Ti3C2Tx MXenes-based flexible materials for electrochemical energy storage and solar energy conversion. Nanophotonics 2022, 11 (14), 3215-3245. https://doi.org/10.1515/nanoph-2022-0228
Luo, Y.; Wu, Y.; Braun, A.; Huang, C.; Li, Xyan; Menon, C.; Chu, P. K. Defect engineering to tailor metal vacancies in 2D conductive metal-organic frameworks: an example in electrochemical sensing. ACS Nano 2022, 16 (12), 20820-20830. https://doi.org/10.1021/acsnano.2c08097
Luo, Y.; Wu, D.; Li, Z.; Li, X. ‐Y.; Wu, Y.; Feng, S. ‐P.; Menon, C.; Chen, H.; Chu, P. K. Plasma functionalized MoSe2 for efficient nonenzymatic sensing of hydrogen peroxide in ultra‐wide pH range. SmartMat 2022, 3 (3), 491-502. https://doi.org/10.1002/smm2.1089
Luo, Y.; Wu, Y.; Huang, C.; Menon, C.; Feng, S. ‐P.; Chu, P. K. Plasma modified and tailored defective electrocatalysts for water electrolysis and hydrogen fuel cells. EcoMat 2022, 4 (4), e12197 (30 pp.). https://doi.org/10.1002/eom2.12197
Mo, T.; Lau, K. T.; Li, Y.; Poon, C. K.; Wu, Y.; Chu, P. K.; Luo, Y. Commercialization of electric vehicles in Hong Kong. Energies 2022, 15 (3), 942 (27 pp.). https://doi.org/10.3390/en15030942
Mo, T.; Li, Y.; Lau, Ktak; Poon, C. K.; Wu, Y.; Luo, Y. Trends and emerging technologies for the development of electric vehicles. Energies 2022, 15 (17), 6271 (34 pp.). https://doi.org/10.3390/en15176271
Naikade, M.; Ortona, A.; Graule, T.; Weber, L. Liquid metal infiltration of silicon based alloys into porous carbonaceous materials. Part I: modelling of channel filling and reaction phase formation. J. Eur. Ceram. Soc. 2022, 42 (5), 1971-1983. https://doi.org/10.1016/j.jeurceramsoc.2021.12.068
Naikade, M.; Hain, C.; Kastelik, K.; Brönnimann, R.; Bianchi, G.; Ortona, A.; Graule, T.; Weber, L. Liquid metal infiltration of silicon based alloys into porous carbonaceous materials. Part II: experimental verification of modelling approaches by infiltration of Si-Zr alloy into idealized microchannels. J. Eur. Ceram. Soc. 2022, 42 (5), 1984-1994. https://doi.org/10.1016/j.jeurceramsoc.2022.01.004
Pfeiffer, S.; Florio, K.; Makowska, M.; Marone, F.; Yüzbasi, S.; Aneziris, C. G.; Van Swygenhoven, H.; Wegener, K.; Graule, T. Crack-reduced alumina/aluminum titanate composites additive manufactured by laser powder bed fusion of black TiO2−x doped alumina granules. J. Eur. Ceram. Soc. 2022, 42 (8), 3515-3529. https://doi.org/10.1016/j.jeurceramsoc.2022.02.046
Rastogi, V. K.; Sturzenegger, P. N.; Gonzenbach, U. T.; Vetterli, M.; Naikade, M.; Kesari, K. K.; Ruokolainen, J.; Kuebler, J.; Blugan, G. High precision pulp-based sacrificial molds: a solution towards mass production of hollow ceramic spheres for deep sea applications. Ceram. Int. 2022, 48 (6), 8235-8244. https://doi.org/10.1016/j.ceramint.2021.12.028
Roels, E.; Terryn, S.; Iida, F.; Bosman, A. W.; Norvez, S.; Clemens, F.; Van Assche, G.; Vanderborght, B.; Brancart, J. Processing of self-healing polymers for soft robotics. Adv. Mater. 2022, 34 (1), 2104798 (27 pp.). https://doi.org/10.1002/adma.202104798
Roels, E.; Terryn, S.; Brancart, J.; Sahraeeazartamar, F.; Clemens, F.; Van Assche, G.; Vanderborght, B. Self-healing sensorized soft robots. Mater. Today Electron. 2022, 1, 100003 (14 pp.). https://doi.org/10.1016/j.mtelec.2022.100003
Rumney, R. M. H.; Robson, S. C.; Kao, A. P.; Barbu, E.; Bozycki, L.; Smith, J. R.; Cragg, S. M.; Couceiro, F.; Parwani, R.; Tozzi, G.; et al. Biomimetic generation of the strongest known biomaterial found in limpet tooth. Nat. Commun. 2022, 13, 3753 (13 pp.). https://doi.org/10.1038/s41467-022-31139-0
Saleem, M. S.; Chen, Q.; Shepelin, N. A.; Dolabella, S.; Rossell, M. D.; Zhang, X.; Kronawitter, C. X.; La Mattina, F.; Braun, A. The role of strain in proton conduction in multi-oriented BaZr0.9Y0.1O3-δ thin film. ACS Appl. Mater. Interfaces 2022, 14 (50), 55915-55924. https://doi.org/10.1021/acsami.2c12657
Sethuraman, V.; Kumar, R. D.; Prabhakaran, A.; Rajkumar, P.; Diwakar, K.; Senthilkumaran, M.; Saravanan, M.; Sasikumar, R.; Aravinth, K.; Ramasamy, P.; et al. Synthesis of Mn2V2O7 nanopebbles via hydrothermal method and its high-efficiency energy storage for supercapacitors. J. Energy Storage 2022, 55, 105553 (13 pp.). https://doi.org/10.1016/j.est.2022.105553
Singh, S. K.; Patra, A.; Chand, R.; Jatav, H. S.; Luo, Y.; Rajput, V. D.; Sehar, S.; Attar, S. K.; Khan, M. A.; Jatav, S. S.; et al. Surface seeding of wheat: a sustainable way towards climate resilience agriculture. Sustainability 2022, 14 (12), 7460 (23 pp.). https://doi.org/10.3390/su14127460
Sourani, F.; Raeissi, K.; Enayati, M. H.; Kharaziha, M.; Hakimizad, A.; Blugan, G.; Salimijazi, H. R. Corrosion and tribocorrosion behavior of ZrO2-Al2O3 composite coatings developed by plasma electrolytic oxidation for load-bearing implants. J. Alloys Compd. 2022, 920, 165856 (12 pp.). https://doi.org/10.1016/j.jallcom.2022.165856
Stosz, M.; Narayanasamy, S.; Graule, T.; Kata, D.; Blugan, G. Low temperature transient liquid phase bonding of alumina ceramics with the Bi2O3-ZnO interlayer. Materials 2022, 15 (19), 6940 (12 pp.). https://doi.org/10.3390/ma15196940
Tutu, S.; Clemens, F. Piezoelectric application of metal oxide nanofibers. In Metal oxide-based nanofibers and their applications; Esposito, V., Marani, D., Eds.; Metal oxides; Elsevier: Amsterdam, 2022; pp 215-246. https://doi.org/10.1016/B978-0-12-820629-4.00002-3
Ud Din, M. A.; Irfan, S.; Jamil, S.; Dar, S. U.; Khan, Q. U.; Saleem, M. S.; Cheng, N. Graphene-like ultrathin bismuth selenide nanosheets as highly stable anode material for sodium-ion battery. J. Alloys Compd. 2022, 901, 163572 (6 pp.). https://doi.org/10.1016/j.jallcom.2021.163572
Wagner, M. A.; Engel, J.; Hadian, A.; Clemens, F.; Rodriguez-Arbaizar, M.; Carreño-Morelli, E.; Wheeler, J. M.; Spolenak, R. Filament extrusion-based additive manufacturing of 316L stainless steel: effects of sintering conditions on the microstructure and mechanical properties. Addit. Manuf. 2022, 59, 103147 (12 pp.). https://doi.org/10.1016/j.addma.2022.103147
Wagner, M. A.; Hadian, A.; Sebastian, T.; Clemens, F.; Schweizer, T.; Rodriguez-Arbaizar, M.; Carreño-Morelli, E.; Spolenak, R. Fused filament fabrication of stainless steel structures - from binder development to sintered properties. Addit. Manuf. 2022, 49, 102472 (9 pp.). https://doi.org/10.1016/j.addma.2021.102472
Yüzbasi, N. S.; Krawczyk, P. A.; Domagała, K. W.; Englert, A.; Burkhardt, M.; Stuer, M.; Graule, T. Removal of MS2 and fr bacteriophages using MgAl2O4-modified, Al2O3-stabilized porous ceramic granules for drinking water treatment. Membranes 2022, 12 (5), 471 (13 pp.). https://doi.org/10.3390/membranes12050471
Zeng, H.; Qu, X.; Xu, D.; Luo, Y. Porous adsorption materials for carbon dioxide capture in industrial flue gas. Front. Chem. 2022, 10, 939701 (18 pp.). https://doi.org/10.3389/fchem.2022.939701
Zhang, Q.; Zhang, S.; Luo, Y.; Liu, Q.; Luo, J.; Chu, P. K.; Liu, X. Preparation of high entropy alloys and application to catalytical water electrolysis. APL Mater. 2022, 10 (7), 070701 (18 pp.). https://doi.org/10.1063/5.0097479
Zhang, H.; Luo, Y.; Chu, P. K.; Liu, Q.; Liu, X.; Zhang, S.; Luo, J.; Wang, X.; Hu, G. Recent advances in non-noble metal-based bifunctional electrocatalysts for overall seawater splitting. J. Alloys Compd. 2022, 922, 166113 (15 pp.). https://doi.org/10.1016/j.jallcom.2022.166113
Zhao, Z.; Ling, X.; El Gabaly, F.; Grass, M.; Jabeen, N.; Jones, D.; Liu, Z.; Mun, B. S.; Braun, A.; Chen, Q. Observation of potential-induced hydration on the surface of ceramic proton conductors using in situ near-ambient pressure X-ray photoelectron spectroscopy. J. Phys. Chem. Lett. 2022, 13 (13), 2928-2933. https://doi.org/10.1021/acs.jpclett.2c00114
Bell, J. G.; Graule, T.; Stuer, M. Barium titanate-based thermistors: past achievements, state of the art, and future perspectives. Appl. Phys. Rev. 2021, 8 (3), 031318 (42 pp.). https://doi.org/10.1063/5.0048697
Borlaf, M.; Conti, L.; Graule, T. Influence of tensile edge design and printing parameters on the flexural strength of ZrO2 and ATZ bars prepared by UV-LCM-DLP. Open Ceram. 2021, 5, 100066 (5 pp.). https://doi.org/10.1016/j.oceram.2021.100066
Braun, A.; Toth, R. Circular economy: national and global policy—overview. Clean Technol. Environ. Policy 2021, 23, 301-304. https://doi.org/10.1007/s10098-020-01988-8
Braun, A.; Toth, R.; Erat, S. Solar energy and the circular economy: an introduction. MRS Energy Sustain. 2021, 8, 1-2. https://doi.org/10.1557/s43581-021-00003-x
Chiolerio, A.; Garofalo, E.; Bevione, M.; Cecchini, L. Multiphysics-enabled liquid state thermal harvesting: synergistic effects between pyroelectricity and triboelectrification. Energy Technol. 2021, 9 (10), 2100544 (7 pp.). https://doi.org/10.1002/ente.202100544
Clemens, F.; Melnykowycz, M.; Bär, F.; Goldenstein, D.; Georgopoulou, A. 2D printing of piezoresistive auxetic silicone sensor structures. IEEE Robot. Autom. Lett. 2021, 6 (2), 2541-2546. https://doi.org/10.1109/LRA.2021.3062000
Clemens, F.; Schulz, J.; Gorjan, L.; Liersch, A.; Sebastian, T.; Sarraf, F. Debinding and sintering of dense ceramic structures made with fused deposition modeling. In Industrializing additive manufacturing. Proceedings of AMPA2020, presented at the AMPA 2020. International conference on additive manufacturing in products and applications, Zürich, Switzerland, September 1-3, 2020; Meboldt, M., Klahn, C., Eds.; Springer: Cham, 2021; pp 293-303. https://doi.org/10.1007/978-3-030-54334-1_21
Domagała, K. Carbon- and copper- based composites for virus removal from water. Doctoral dissertation, AGH University of Science and Technology, Cracow, 2021, 173 p.
Domagała, K.; Bell, J.; Yüzbasi, N. S.; Sinnet, B.; Kata, D.; Graule, T. Virus removal from drinking water using modified activated carbon fibers. RSC Adv. 2021, 11 (50), 31547-31556. https://doi.org/10.1039/D1RA06373A
Du, X.; Blugan, G.; Künniger, T.; Lee, S. S.; Vladislavova, L.; Ferguson, S. J. Non-linear mechanical properties and dynamic response of silicon nitride bioceramic. Ceram. Int. 2021, 47 (23), 33525-33536. https://doi.org/10.1016/j.ceramint.2021.08.261
Erat, S.; Ozkendir, O. M.; Yildirimcan, S.; Gunaydin, S.; Harfouche, M.; Demir, B.; Braun, A. Study on crystallographic and electronic structure of micrometre-scale ZnO and ZnO:B rods via X-ray absorption fine-structure spectroscopy. J. Synchrotron Radiat. 2021, 28, 448-454. https://doi.org/10.1107/S1600577520015866
Florio, K.; Puccio, D.; Viganò, G.; Pfeiffer, S.; Verga, F.; Grasso, M.; Colosimo, B. M.; Graule, T.; Wegener, K. Process characterization and analysis of ceramic powder bed fusion. Int. J. Adv. Manuf. Technol. 2021, 117, 2105-2116. https://doi.org/10.1007/s00170-021-07625-y
Georgopoulou, A.; Egloff, L.; Vanderborght, B.; Clemens, F. A sensorized soft pneumatic actuator fabricated with extrusion-based additive manufacturing. Actuators 2021, 10 (5), 102 (11 pp.). https://doi.org/10.3390/act10050102
Georgopoulou, A.; Egloff, L.; Vanderborght, B.; Clemens, F. A soft pneumatic actuator with integrated deformation sensing elements produced exclusively with extrusion based additive manufacturing. Eng. Proc. 2021, 6 (1), 11 (4 pp.). https://doi.org/10.3390/I3S2021Dresden-10097
Georgopoulou, A.; Vanderborght, B.; Clemens, F. Fabrication of a soft robotic gripper with integrated strain sensing elements using multi-material additive manufacturing. Front. Robot. AI 2021, 8, 615991 (16 pp.). https://doi.org/10.3389/frobt.2021.615991
Georgopoulou, A.; Vanderborght, B.; Clemens, F. Multi-material 3D printing of thermoplastic elastomers for development of soft robotic structures with integrated sensor elements. In Industrializing additive manufacturing. Proceedings of AMPA2020, presented at the 2nd AMPA conference (additive manufacturing in products and applications), Zürich, Switzerland, September 1-3, 2020; Meboldt, M., Klahn, C., Eds.; Springer: Cham, 2021; pp 67-81. https://doi.org/10.1007/978-3-030-54334-1_6
Georgopoulou, A.; Michel, S.; Vanderborght, B.; Clemens, F. Piezoresistive sensor fiber composites based on silicone elastomers for the monitoring of the position of a robot arm. Sens. Actuators A 2021, 318, 112433 (11 pp.). https://doi.org/10.1016/j.sna.2020.112433
Georgopoulou, A.; Michel, S.; Clemens, F. Sensorized robotic skin based on piezoresistive sensor fiber composites produced with injection molding of liquid silicone. Polymers 2021, 13 (8), 1226 (16 pp.). https://doi.org/10.3390/polym13081226
Georgopoulou, A.; Bosman, A. W.; Brancart, J.; Vanderborght, B.; Clemens, F. Supramolecular self-healing sensor fiber composites for damage detection in piezoresistive electronic skin for soft robots. Polymers 2021, 13 (17), 2983 (18 pp.). https://doi.org/10.3390/polym13172983
Gilshtein, E.; Pfeiffer, S.; Rossell, M. D.; Sastre, J.; Gorjan, L.; Erni, R.; Tiwari, A. N.; Graule, T.; Romanyuk, Y. E. Millisecond photonic sintering of iron oxide doped alumina ceramic coatings. Sci. Rep. 2021, 11 (1), 3536 (10 pp.). https://doi.org/10.1038/s41598-021-82896-9
Hadian, A.; Koch, L.; Koberg, P.; Sarraf, F.; Liersch, A.; Sebastian, T.; Clemens, F. Material extrusion based additive manufacturing of large zirconia structures using filaments with ethylene vinyl acetate based binder composition. Addit. Manuf. 2021, 47, 102227 (12 pp.). https://doi.org/10.1016/j.addma.2021.102227
Hedayati, M.; Taheri-Nassaj, E.; Yourdkhani, A.; Borlaf, M.; Rasekh, S.; Amirkhizi, P.; Sebastian, T.; Payandeh, S.; Clemens, F. J. Characterization and estimation of dielectric constant of electrospun BaTiO3 nanofibers at different calcination temperatures using theoretical models. J. Eur. Ceram. Soc. 2021, 41 (2), 1299-1309. https://doi.org/10.1016/j.jeurceramsoc.2020.09.072
Hu, Y.; Boudoire, F.; Mayer, M. T.; Yoon, S.; Graetzel, M.; Braun, A. Function and electronic structure of the SnO2 buffer layer between the α-Fe2O3 water oxidation photoelectrode and the transparent conducting oxide current collector. J. Phys. Chem. C 2021, 125 (17), 9158-9168. https://doi.org/10.1021/acs.jpcc.1c01809
Jang, J.; Warriam Sasikumar, P. V.; Navaee, F.; Hagelüken, L.; Blugan, G.; Brugger, J. Electrochemical performance of polymer-derived SiOC and SiTiOC ceramic electrodes for artificial cardiac pacemaker applications. Ceram. Int. 2021, 47 (6), 7593-7601. https://doi.org/10.1016/j.ceramint.2020.11.098
Kim, B. J.; Fabbri, E.; Borlaf, M.; Abbott, D. F.; Castelli, I. E.; Nachtegaal, M.; Graule, T.; Schmidt, T. J. Oxygen evolution reaction activity and underlying mechanism of perovskite electrocatalysts at different pH. Mater. Adv. 2021, 2 (1), 345-355. https://doi.org/10.1039/D0MA00661K
Kumar, V.; Rudra, R.; Hait, S. Sulfonated polyvinylidene fluoride-crosslinked-aniline-2-sulfonic acid as ion exchange membrane in single-chambered microbial fuel cell. J. Environ. Chem. Eng. 2021, 9 (6), 106467 (10 pp.). https://doi.org/10.1016/j.jece.2021.106467
Liu, H.; Huangfu, S.; Zhang, X.; Lin, H.; Schilling, A. Superconductivity and charge density wave formation in lithium-intercalated 2H-TaS2. Phys. Rev. B 2021, 104 (6), 064511 (7 pp.). https://doi.org/10.1103/PhysRevB.104.064511
Lugovy, M.; Verbylo, D.; Orlovskaya, N.; Reece, M.; Kuebler, J.; Graule, T.; Blugan, G. Effect of loading and heating history on deformation of LaCoO3. Materials 2021, 14 (13), 3543 (15 pp.). https://doi.org/10.3390/ma14133543
Luo, Y.; Wu, Y.; Li, B.; Mo, T.; Li, Y.; Feng, S. P.; Qu, J.; Chu, P. K. Development and application of fuel cells in the automobile industry. J. Energy Storage 2021, 42, 103124 (19 pp.). https://doi.org/10.1016/j.est.2021.103124
Orlovskaya, N.; Hyer, H.; Sohn, Y.; Lugovy, M.; Blugan, G.; Graule, T.; Kuebler, J.; Yarmolenko, S.; Sankar, J.; Reece, M. J. ZrB2, HfB2, OsB2 and IrB2 boride ceramics: processing, structure, and properties. In Encyclopedia of materials: technical ceramics and glasses; Pomeroy, M., Ed.; Vol. 2; Elsevier: Amsterdam, 2021; pp 200-215. https://doi.org/10.1016/B978-0-12-818542-1.00055-2
Pfeiffer, S.; Florio, K.; Puccio, D.; Grasso, M.; Colosimo, B. M.; Aneziris, C. G.; Wegener, K.; Graule, T. Direct laser additive manufacturing of high performance oxide ceramics: a state-of-the-art review. J. Eur. Ceram. Soc. 2021, 41 (13), 6087-6114. https://doi.org/10.1016/j.jeurceramsoc.2021.05.035
Sarraf, F.; Abbatinali, E.; Gorjan, L.; Sebastian, T.; Colombo, P.; Churakov, S. V.; Clemens, F. Effect of MgO sintering additive on mullite structures manufactured by fused deposition modeling (FDM) technology. J. Eur. Ceram. Soc. 2021, 41 (13), 6677-6686. https://doi.org/10.1016/j.jeurceramsoc.2021.06.012
Sebastian, T.; Bach, M.; Geiger, A.; Lusiola, T.; Kozielski, L.; Clemens, F. Investigation of electromechanical properties on 3-d printed piezoelectric composite scaffold structures. Materials 2021, 14 (20), 5927 (12 pp.). https://doi.org/10.3390/ma14205927
Simfukwe, J.; Mapasha, R. E.; Braun, A.; Diale, M. Ab initio studies of bimetallic-doped {0001} hematite surface for enhanced photoelectrochemical water splitting. Catalysts 2021, 11 (8), 940 (13 pp.). https://doi.org/10.3390/catal11080940
Tagliabue, A.; Eblagon, F.; Clemens, F. Analysis of styrene-butadiene based thermoplastic magnetorheological elastomers with surface-treated iron particles. Polymers 2021, 13 (10), 1597 (11 pp.). https://doi.org/10.3390/polym13101597
Terryn, S.; Langenbach, J.; Roels, E.; Brancart, J.; Bakkali-Hassani, C.; Poutrel, Q. A.; Georgopoulou, A.; George Thuruthel, T.; Safaei, A.; Ferrentino, P.; et al. A review on self-healing polymers for soft robotics. Mater. Today 2021, 47, 187-205. https://doi.org/10.1016/j.mattod.2021.01.009
Thuruthel, T. G.; Hughes, J.; Georgopoulou, A.; Clemens, F.; Iida, F. Using redundant and disjoint time-variant soft robotic sensors for accurate static state estimation. IEEE Robot. Autom. Lett. 2021, 6 (2), 2099-2105. https://doi.org/10.1109/LRA.2021.3061399
Tze, T. Y.; Osman, R. A. M.; Idris, M. S.; Muhsen, K. N. D. K.; Nor, N. I. M.; Wahab, Y. A.; Sagadevan, S.; Sebastian, T.; Arturo, R. L. D. Impedance and modulus spectroscopy of polycrystalline Ba0.9995La0.0005TiO3for multilayer ceramic capacitor. In Proceedings of 8th international conference on advanced material engineering & technology (ICAMET 2020), presented at the 8th international conference on advanced material engineering and technology (ICAMET 2020), Langkawi, Malaysia, November 26-27, 2020; Razak, R. A., Abdullah, M. M. A. B., Rahim, S. Z. A., Tahir, M. F. M., Mortar, N. A. M., Jamaludin, L., Eds.; AIP conference proceedings; American Institute of Physics, 2021; Vol. 2347, p 020219 (7 pp.). https://doi.org/10.1063/5.0052102
Vladislavova, L.; Smolorz, T.; Orlovskaya, N.; Lugovy, M.; Reece, M. J.; Kӧbel, S.; Kopia, A.; Makowska, M.; Graule, T.; Blugan, G. Strength analysis and stress-strain deformation behavior of 3 mol% Y-TZP and 21 wt.% Al2O3-3 mol% Y-TZP. Materials 2021, 14 (14), 3903 (20 pp.). https://doi.org/10.3390/ma14143903
Wang, H.; Braun, A.; Cramer, S. P.; Gee, L. B.; Yoda, Y. Nuclear resonance vibrational spectroscopy: a modern tool to pinpoint site-specific cooperative processes. Crystals 2021, 11 (8), 909 (44 pp.). https://doi.org/10.3390/cryst11080909
Yang, Y.; Huangfu, S.; Sato, S.; Juríček, M. Cycloparaphenylene double nanohoop: structure, lamellar packing, and encapsulation of C60in the solid state. Org. Lett. 2021, 23 (20), 7943-7948. https://doi.org/10.1021/acs.orglett.1c02950
Yüzbasi, N. S.; Graule, T. Colloid casting processes: slip casting, centrifugal casting, and gel casting. In Encyclopedia of materials: technical ceramics and glasses; Pomeroy, M., Ed.; Vol. 1; Elsevier: Amsterdam; Boston, 2021; pp 146-153. https://doi.org/10.1016/B978-0-12-803581-8.11767-9
Zhang, Y.; Huang, Y.; Zhu, S. ‐S.; Liu, Y. ‐Y.; Zhang, X.; Wang, J. ‐J.; Braun, A. Covalent S-O bonding enables enhanced photoelectrochemical performance of Cu2S/Fe2O3 heterojunction for water splitting. Small 2021, 17 (30), 2100320 (9 pp.). https://doi.org/10.1002/smll.202100320
Zhu, S. S.; Zhang, Y.; Zou, Y.; Guo, S. Y.; Liu, H.; Wang, J. J.; Braun, A. Cu2S/BiVO4 heterostructure photoanode with extended wavelength range for efficient water splitting. J. Phys. Chem. C 2021, 125 (29), 15890-15898. https://doi.org/10.1021/acs.jpcc.1c02964
Zubrzycka, P.; Radecka, M.; Graule, T.; Stuer, M. Metal cation complexes as dispersing agents for non-aqueous powder suspensions. Ceram. Int. 2021, 47 (13), 18443-18454. https://doi.org/10.1016/j.ceramint.2021.03.168
Abd El-Nasser, S.; Kim, S.; Yoon, H.; Toth, R.; Pal, K.; Bechelany, M. Sodium-assisted TiO2 nanotube arrays of novel electrodes for photochemical sensing platform. Org. Electr. 2020, 76, 105443 (8 pp.). https://doi.org/10.1016/j.orgel.2019.105443
Aegerter, D.; Borlaf, M.; Fabbri, E.; Clark, A. H.; Nachtegaal, M.; Graule, T.; Schmidt, T. J. Tuning the Co oxidation state in Ba0.5Sr0.5Co0.8Fe0.2O3-δ by flame spray synthesis towards high oxygen evolution reaction activity. Catalysts 2020, 10 (9), 984 (16 pp.). https://doi.org/10.3390/catal10090984
Bay, M. C.; Heinz, M. V. F.; Linte, C.; German, A.; Blugan, G.; Battaglia, C.; Vogt, U. F. Impact of sintering conditions and zirconia addition on flexural strength and ion conductivity of Na-β"-alumina ceramics. Mater. Today Comm. 2020, 23, 101118 (7 pp.). https://doi.org/10.1016/j.mtcomm.2020.101118
Borlaf, M.; Szubra, N.; Serra-Capdevila, A.; Kubiak, W. W.; Graule, T. Fabrication of ZrO2 and ATZ materials via UV-LCM-DLP additive manufacturing technology. J. Eur. Ceram. Soc. 2020, 40 (4), 1574-1581. https://doi.org/10.1016/j.jeurceramsoc.2019.11.037
Braun, A. Quantum electrodynamics of photosynthesis. Mathematical description of light, life and matter; De Gruyter STEM; De Gruyter: Berlin, 2020; 450 p. https://doi.org/10.1515/9783110629941
Clemens, F. J.; Sebastian, T.; Kerber, A. FDM/FFF - an alternative to CIM manufacturing of prototype and small quantities of ceramic part? Ceramic applications: components for high performance, 2020, pp 27-31.
Clemens, F. J. FDM/FFF printing of ceramic structures. Ceramic applications: components for high performance, 2020, pp 20-22.
Conti, L.; Bienenstein, D.; Borlaf, M.; Graule, T. Effects of the layer height and exposure energy on the lateral resolution of zirconia parts printed by lithography-based additive manufacturing. Materials 2020, 13 (6), 1317 (13 pp.). https://doi.org/10.3390/ma13061317
Conzelmann, N. A.; Penn, A.; Partl, M. N.; Clemens, F. J.; Poulikakos, L. D.; Müller, C. R. Link between packing morphology and the distribution of contact forces and stresses in packings of highly nonconvex particles. Phys. Rev. E 2020, 102 (6), 062902 (13 pp.). https://doi.org/10.1103/PhysRevE.102.062902
Conzelmann, N. A.; Gorjan, L.; Sarraf, F.; Poulikakos, L. D.; Partl, M. N.; Müller, C. R.; Clemens, F. J. Manufacturing complex Al2O3 ceramic structures using consumer-grade fused deposition modelling printers. Rapid Prototyp. J. 2020, 26 (6), 1035-1048. https://doi.org/10.1108/RPJ-05-2019-0133
Domagała, K.; Jacquin, C.; Borlaf, M.; Sinnet, B.; Julian, T.; Kata, D.; Graule, T. Efficiency and stability evaluation of Cu2O/MWCNTs filters for virus removal from water. Water Res. 2020, 179, 115879 (10 pp.). https://doi.org/10.1016/j.watres.2020.115879
Domagała, K.; Borlaf, M.; Kata, D.; Graule, T. Synthesis of copper-based multi-walled carbon nanotube composites. Arch. Metall. Mater. 2020, 65 (1), 157-162. https://doi.org/10.24425/amm.2019.131109
Du, P.; Chen, Q.; Fan, Z.; Pan, H.; Haibach, F. G.; Gomez, M. A.; Braun, A. Cooperative origin of proton pair diffusivity in yttrium substituted barium zirconate. Commun. Phys. 2020, 3, 200 (9 pp.). https://doi.org/10.1038/s42005-020-00464-5
Dubey, R. J. C.; Sasikumar, P. V. W.; Cerboni, N.; Aebli, M.; Krumeich, F.; Blugan, G.; Kravchyk, K. V.; Graule, T.; Kovalenko, M. V. Silicon oxycarbide-antimony nanocomposites for high-performance Li-ion battery anodes. Nanoscale 2020, 12 (25), 13540-13547. https://doi.org/10.1039/D0NR02930K
Georgopoulou, A.; Kummerlöwe, C.; Clemens, F. Effect of the elastomer matrix on thermoplastic elastomer-based strain sensor fiber composites. Sensors 2020, 20 (8), 2399 (15 pp.). https://doi.org/10.3390/s20082399
Georgopoulou, A.; Clemens, F. Piezoresistive elastomer-based composite strain sensors and their applications. ACS Appl. Electron. Mater. 2020, 2 (7), 1826-1842. https://doi.org/10.1021/acsaelm.0c00278
Gilshtein, E.; Bolat, S.; Sevilla, G. T.; Cabas-Vidani, A.; Clemens, F.; Graule, T.; Tiwari, A. N.; Romanyuk, Y. E. Inkjet-printed conductive ITO patterns for transparent security systems. Adv. Mater. Technol. 2020, 5 (9), 2000369 (6 pp.). https://doi.org/10.1002/admt.202000369
Giubilini, A.; Siqueira, G.; Clemens, F. J.; Sciancalepore, C.; Messori, M.; Nyström, G.; Bondioli, F. 3D-printing nanocellulose-poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) biodegradable composites by fused deposition modeling. ACS Sustain. Chem. Eng. 2020, 8 (27), 10292-10302. https://doi.org/10.1021/acssuschemeng.0c03385
Gorjan, L.; Galusca, C.; Sami, M.; Sebastian, T.; Clemens, F. Effect of stearic acid on rheological properties and printability of ethylene vinyl acetate based feedstocks for fused filament fabrication of alumina. Addit. Manuf. 2020, 36, 101391 (9 pp.). https://doi.org/10.1016/j.addma.2020.101391
Hadian, A.; Zamani, C.; Schreiner, C.; Figi, R.; Clemens, F. J. Influence of carbon content and processing treatment of metallic binder on the outgassing and sintering of NbC based cemented carbide. Ceram. Int. 2020, 46 (18), 28422-28431. https://doi.org/10.1016/j.ceramint.2020.07.347
Hedayati, M.; Taheri-Nassaj, E.; Yourdkhani, A.; Borlaf, M.; Zhang, J.; Calame, M.; Sebastian, T.; Payandeh, S.; Clemens, F. J. BaTiO3 nanotubes by co-axial electrospinning: rheological and microstructural investigations. J. Eur. Ceram. Soc. 2020, 40 (4), 1269-1279. https://doi.org/10.1016/j.jeurceramsoc.2019.11.078
Heuer, C.; Storti, E.; Graule, T.; Aneziris, C. G. Electrospinning of Y2O3- and MgO-stabilized zirconia nanofibers and characterization of the evolving phase composition and morphology during thermal treatment. Ceram. Int. 2020, 46 (8), 12001-12008. https://doi.org/10.1016/j.ceramint.2020.01.240
Hufenus, R.; Gooneie, A.; Sebastian, T.; Simonetti, P.; Geiger, A.; Parida, D.; Bender, K.; Schäch, G.; Clemens, F. Antistatic fibers for high-visibilityworkwear: challenges of melt-spinning industrial fibers. Materials 2020, 13 (11), 2645 (21 pp.). https://doi.org/10.3390/ma13112645
Jacquin, C.; Yu, D.; Sander, M.; Domagala, K. W.; Traber, J.; Morgenroth, E.; Julian, T. R. Competitive co-adsorption of bacteriophage MS2 and natural organic matter onto multiwalled carbon nanotubes. Water Res. X 2020, 9, 100058 (12 pp.). https://doi.org/10.1016/j.wroa.2020.100058
Jiang, F.; Ju, W.; Pan, Z.; Lin, L.; Yue, Y.; Zhao, Y. ‐B.; Li, C.; Clemens, F.; Battaglia, C.; Wang, J. Conformal Cu coating on electrospun nanofibers for 3D electro‐conductive networks. Adv. Electron. Mater. 2020, 6 (2), 1900767 (11 pp.). https://doi.org/10.1002/aelm.201900767
Konstantinou, G.; Kakkava, E.; Hagelüken, L.; Vallachira Warriam Sasikumar, P.; Wang, J.; Makowska, M. G.; Blugan, G.; Nianias, N.; Marone, F.; Van Swygenhoven, H.; et al. Additive micro-manufacturing of crack-free PDCs by two-photon polymerization of a single, low-shrinkage preceramic resin. Addit. Manuf. 2020, 35, 101343 (10 pp.). https://doi.org/10.1016/j.addma.2020.101343
Kuliiev, R.; Orlovskaya, N.; Hyer, H.; Sohn, Y.; Lugovy, M.; Ha, D. G.; Radovic, M.; Castle, E. G.; Reece, M. J.; Vallachira Warriam Sasikumar, P.; et al. Spark plasma sintered B4C - structural, thermal, electrical and mechanical properties. Materials 2020, 13 (7), 1612 (21 pp.). https://doi.org/10.3390/ma13071612
Ligon, S. C.; Bay, M. ‐C.; Heinz, M. V. F.; Battaglia, C.; Graule, T.; Blugan, G. Large planar Na-β"-Al2O3 solid electrolytes for next generation Na-Batteries. Materials 2020, 13 (2), 433 (10 pp.). https://doi.org/10.3390/ma13020433
Ligon, S. C.; Blugan, G.; Bay, M. C.; Battaglia, C.; Heinz, M. V. F.; Graule, T. Performance analysis of Na-β"-Al2O3/YSZ solid electrolytes produced by conventional sintering and by vapor conversion of α-Al2O3/YSZ. Solid State Ionics 2020, 345, 115169 (9 pp.). https://doi.org/10.1016/j.ssi.2019.115169
Makowska, M.; Sasikumar, P. V. W.; Hagelüken, L.; Sanchez, D. F.; Casati, N.; Marone, F.; Blugan, G.; Brugger, J.; Van Swygenhoven, H. Cracks, porosity and microstructure of Ti modified polymer-derived SiOC revealed by absorption-, XRD- and XRF-contrast 2D and 3D imaging. Acta Mater. 2020, 198, 134-144. https://doi.org/10.1016/j.actamat.2020.07.067
Mazurkow, J. M.; Yüzbasi, N. S.; Domagala, K. W.; Pfeiffer, S.; Kata, D.; Graule, T. Nano-sized copper (Oxide) on alumina granules for water filtration: effect of copper oxidation state on virus removal performance. Environ. Sci. Technol. 2020, 54 (2), 1214-1222. https://doi.org/10.1021/acs.est.9b05211
Mensur‐Alkoy, E.; Kaya, M. Y.; Sarı, H. A.; Pekel, O.; Olukkent, R.; Tur, Y. K.; Sebastian, T.; Clemens, F. J.; Alkoy, S. Mechanical and electromechanical properties of piezoelectric ceramic fibers drawn by the alginate gelation method. Int. J. Appl. Ceram. Technol. 2020, 17, 1371-1381. https://doi.org/10.1111/ijac.13405
Naikade, M. Study and characterization of silicon-metal alloy systems for the reactive infiltration process of ceramic matrix composites. Doctoral dissertation, École Polytechnique Fédérale de Lausanne (EPFL), Lausanne, 2020, 185 p.
Nakaramontri, Y.; Kummerlöwe, C.; Nakason, C.; Pichaiyut, S.; Wisunthon, S.; Clemens, F. Piezoresistive carbon-based composites for sensor applications: effects of polarity and non-rubber components on shape recovery. eXPRESS Polym. Lett. 2020, 14 (10), 970-986. https://doi.org/10.3144/expresspolymlett.2020.79
Ożóg, P.; Rutkowski, P.; Kata, D.; Graule, T. Ultraviolet lithography-based ceramic manufacturing (UV-LCM) of the aluminum nitride (AlN)-based photocurable dispersions. Materials 2020, 13 (19), 4219 (15 pp.). https://doi.org/10.3390/MA13194219
Pfeiffer, S.; Makowska, M.; Florio, K.; Sanchez, D. F.; Marone, F.; Zhang, X.; Aneziris, C. G.; Van Swygenhoven, H.; Wegener, K.; Graule, T. Selective laser melting of thermal pre-treated METAL oxide doped aluminum oxide granules. Open Ceram. 2020, 2, 100007 (14 pp.). https://doi.org/10.1016/j.oceram.2020.100007
Quinsaat, J. E. Q.; de Wild, T.; Nüesch, F. A.; Damjanovic, D.; Krämer, R.; Schürch, G.; Häfliger, D.; Clemens, F.; Sebastian, T.; Dascalu, M.; et al. Stretchable piezoelectric elastic composites for sensors and energy generators. Composites B 2020, 198, 108211 (13 pp.). https://doi.org/10.1016/j.compositesb.2020.108211
Sebastian, T.; Preisker, T. R.; Gorjan, L.; Graule, T.; Aneziris, C. G.; Clemens, F. J. Synthesis of hydroxyapatite fibers using electrospinning: a study of phase evolution based on polymer matrix. J. Eur. Ceram. Soc. 2020, 40 (6), 2489-2496. https://doi.org/10.1016/j.jeurceramsoc.2020.01.070
Shahsavari, E.; Zamani, C.; Dermeni, H. A.; Hadian, A. M.; Hadian, A. Cryomilling-assisted synthesis of nanostructured silicon. J. Ultrafine Grained Nanostruct. Mater. 2020, 53 (2), 158-165. https://doi.org/10.22059/jufgnsm.2020.02.07
Simfukwe, J.; Mapasha, R. E.; Braun, A.; Diale, M. Exploring the stability and electronic properties of Zn-doped hematite surfaces for photoelectrochemical water splitting. J. Phys. Chem. Solids 2020, 136, 109159 (9 pp.). https://doi.org/10.1016/j.jpcs.2019.109159
Stuer, M.; Bowen, P.; Zhao, Z. Spark plasma sintering of ceramics: from modeling to practice. Ceram. 2020, 3 (4), 476-493. https://doi.org/10.3390/ceramics3040039
Timrov, I.; Agrawal, P.; Zhang, X.; Erat, S.; Liu, R.; Braun, A.; Cococcioni, M.; Calandra, M.; Marzari, N.; Passerone, D. Electronic structure of pristine and Ni-substituted LaFeO3 from near edge x-ray absorption fine structure experiments and first-principles simulations. Phys. Rev. Res. 2020, 2 (3), 033265 (16 pp.). https://doi.org/10.1103/PhysRevResearch.2.033265
Vallachira Warriam Sasikumar, P.; Müller, E.; Clement, P.; Jang, J.; kakkava, E.; Panusa, G.; Psaltis, D.; Maniura-Weber, K.; Rottmar, M.; Brugger, J.; et al. In vitro cytocompatibility assessment of Ti-modified silicon-oxycarbide based polymer-derived ceramic implantable electrodes under pacing conditions. ACS Appl. Mater. Interfaces 2020, 12 (15), 17244-17253. https://doi.org/10.1021/acsami.0c01465
Verga, F.; Borlaf, M.; Conti, L.; Florio, K.; Vetterli, M.; Graule, T.; Schmid, M.; Wegener, K. Laser-based powder bed fusion of alumina toughened zirconia. Addit. Manuf. 2020, 31, 100959 (6 pp.). https://doi.org/10.1016/j.addma.2019.100959
Wagner, M. A.; Sebastian, T.; Clemens, F.; Wheeler, J. M.; Rusch, A.; Ganz, R.; Spolenak, R. Feedstock development for fused deposition of 316L stainless steel and characterization of final materials properties. In Euro PM2020 congress and exhibition. Developing the powder metallurgy future, presented at the Euro PM2020 congress and exhibition. Developing the powder metallurgy future, Virtual, Online, October 5-7, 2020; European Powder Metallurgy Association (EPMA): Chantilly, 2020; p 177045 (6 pp.).
Watts, S.; Julian, T. R.; Maniura-Weber, K.; Graule, T.; Salentinig, S. Colloidal transformations in MS2 virus particles: driven by pH, influenced by natural organic matter. ACS Nano 2020, 14 (2), 1879-1887. https://doi.org/10.1021/acsnano.9b08112
Zhang, X.; Pfeiffer, S.; Rutkowski, P.; Makowska, M.; Kata, D.; Yang, J.; Graule, T. Laser cladding of manganese oxide doped aluminum oxide granules on titanium alloy for biomedical applications. Appl. Surf. Sci. 2020, 520, 146304 (11 pp.). https://doi.org/10.1016/j.apsusc.2020.146304
Abdelnasser, S.; Park, G.; Han, H.; Toth, R.; Yoon, H. Enhanced photocatalytic performance of poly(3,4-ethylenedioxythiophene)-coated TiO2 nanotube electrodes. Synth. Met. 2019, 251, 120-126. https://doi.org/10.1016/j.synthmet.2019.03.018
Bolat, S.; Fuchs, P.; Knobelspies, S.; Temel, O.; Torres Sevilla, G.; Gilshtein, E.; Andres, C.; Shorubalko, I.; Liu, Y.; Tröster, G.; et al. Inkjet-printed and deep-UV-annealed YAlOx dielectrics for high-performance IGZO thin-film transistors on flexible substrates. Adv. Electron. Mater. 2019, 5 (6), 1800843 (9 pp.). https://doi.org/10.1002/aelm.201800843
Borlaf, M.; Serra-Capdevila, A.; Colominas, C.; Graule, T. Development of UV-curable ZrO2 slurries for additive manufacturing (LCM-DLP) technology. J. Eur. Ceram. Soc. 2019, 39 (13), 3797-3803. https://doi.org/10.1016/j.jeurceramsoc.2019.05.023
Braun, A. Electrochemical energy systems. Foundations, energy storage and conversion; De Gruyter Textbook; De Gruyter: Berlin, Boston, 2019; 654 p. https://doi.org/10.1515/9783110561838
Braun, A.; Chen, Q.; Yelon, A. Hole and protonic polarons in perovskites. Chimia 2019, 73 (11), 936-942. https://doi.org/10.2533/chimia.2019.936
Braun, A.; Toth, R. Swiss stakeholder workshop for the SUNRISE H2020 FET-flagship project. Chimia 2019, 73 (11), 952-956. https://doi.org/10.2533/chimia.2019.952
Braun, A. Von der Nordsee bis Venedig. Mit Wasserstoff und Brennstoffzelle Europa "erfahren". Eine "Auto"-Biographie.; Dr. Artur Braun: sine loco, 2019; 373 p.
Clemens, F. J. FDM Keramikdruck: Herstellung von keramischen Strukturen mit Hilfe von kommerziellen Filamentdruckern. Keram. Z. 2019, 71 (5), 40-44. https://doi.org/10.1007/s42410-019-0055-x
Domagała, K.; Borlaf, M.; Traber, J.; Kata, D.; Graule, T. Purification and functionalisation of multi-walled carbon nanotubes. Mater. Lett. 2019, 253, 272-275. https://doi.org/10.1016/j.matlet.2019.06.085
Dubey, R. J. ‐C.; Vallachira Warriam Sasikumar, P.; Krumeich, F.; Blugan, G.; Kuebler, J.; Kravchyk, K. V.; Graule, T.; Kovalenko, M. V. Silicon oxycarbide—tin nanocomposite as a high‐power‐density anode for Li‐ion batteries. Adv. Sci. 2019, 6 (19), 1901220 (9 pp.). https://doi.org/10.1002/advs.201901220
Falk, G. S.; Rodrigues Neto, J. B.; Borlaf, M.; Gómez, S. Y.; Novaes de Oliveira, A. P.; Hotza, D. Fast microwave-assisted hydrothermal synthesis of TiNb2O7 nanoparticles. Int. J. Appl. Ceram. Technol. 2019, 1 (4), 235-240. https://doi.org/10.1002/ces2.10029
Florio, K.; Pfeiffer, S.; Makowska, M.; Casati, N.; Verga, F.; Graule, T.; Van Swygenhoven, H.; Wegener, K. An innovative selective laser melting process for hematite-doped aluminum oxide. Adv. Eng. Mater. 2019, 21 (6), 1801352 (10 pp.). https://doi.org/10.1002/adem.201801352
Gorjan, L.; Tonello, R.; Sebastian, T.; Colombo, P.; Clemens, F. Fused deposition modeling of mullite structures from a preceramic polymer and γ-alumina. J. Eur. Ceram. Soc. 2019, 39 (7), 2463-2471. https://doi.org/10.1016/j.jeurceramsoc.2019.02.032
Hadian, A.; Zamani, C.; Clemens, F. J. Sintering behavior of NbC based cemented carbides bonded with M2 high speed steel. Ceram. Int. 2019, 45 (7), 8616-8625. https://doi.org/10.1016/j.ceramint.2019.01.181
Hadian, A.; Zamani, C.; Gorjan, L.; Clemens, F. J. Thermoplastic processing and debinding behavior of NbC-M2 high speed steel cemented carbide. J. Mater. Process. Technol. 2019, 263, 91-100. https://doi.org/10.1016/j.jmatprotec.2018.08.006
Holló, G.; Leelőssy, Á.; Tóth, R.; Lagzi, I. Tactic droplets at the liquid-air interface. In Self-organized motion: physicochemical design based on nonlinear dynamics; Nakata, S., Pimienta, V., Lagzi, I., Kitahata, H., Suematsu, N. J., Eds.; Theoretical and computational chemistry series, Vol. 14; Royal Society of Chemistry: Cambridge, 2019; pp 167-181. https://doi.org/10.1039/9781788013499-00167
Kim, B. J.; Fabbri, E.; Castelli, I. E.; Borlaf, M.; Graule, T.; Nachtegaal, M.; Schmidt, T. J. Fe-doping in double perovskite PrBaCo2(1-x)Fe2xO6-δ: insights into structural and electronic efects to enhance oxygen evolution catalyst stability. Catalysts 2019, 9 (3), 263 (17 pp.). https://doi.org/10.3390/catal9030263
Kim, B. J.; Fabbri, E.; Abbott, D. F.; Cheng, X.; Clark, A. H.; Nachtegaal, M.; Borlaf, M.; Castelli, I. E.; Graule, T.; Schmidt, T. J. Functional role of Fe-doping in Co-based perovskite oxide catalysts for oxygen evolution reaction. J. Am. Chem. Soc. 2019, 141, 5231-5240. https://doi.org/10.1021/jacs.8b12101
Ligon, S. C.; Blugan, G.; Kuebler, J. Maskless lithography of silazanes for fabrication of ceramic micro-components. Ceram. Int. 2019, 45 (2), 2345-2350. https://doi.org/10.1016/j.ceramint.2018.10.151
Ligon, S. C.; Blugan, G.; Kuebler, J. Pulsed UV laser processing of carbosilane and silazane polymers. Materials 2019, 12 (3), 372 (15 p.). https://doi.org/10.3390/ma12030372
Liu, Y.; Zeder, S.; Lin, S.; Carron, R.; Grossmann, G.; Bolat, S.; Nishiwaki, S.; Clemens, F.; Graule, T.; Tiwari, A. N.; et al. Draw-spun, photonically annealed Ag fibers as alternative electrodes for flexible CIGS solar cells. Sci. Technol. Adv. Mater. 2019, 20 (1), 26-34. https://doi.org/10.1080/14686996.2018.1552480
Liu, Y.; Moser, T.; Andres, C.; Gorjan, L.; Remhof, A.; Clemens, F.; Graule, T.; Tiwari, A. N.; Romanyuk, Y. E. Ethanolamine-assisted low-temperature crystallization of hydroxide nanoparticle ink into transparent and conductive ITO layers. J. Mater. Chem. A 2019, 7 (7), 3083-3089. https://doi.org/10.1039/C8TA09891C
Lugovy, M.; Orlovskaya, N.; Neumann, M.; Aneziris, C. G.; Jelitto, H.; Schneider, G. A.; Kuebler, J. Room temperature R-curve and stable crack growth behaviour of ZrB2-SiC ceramic composites. Adv. Appl. Ceram. 2019, 118 (4), 169-182. https://doi.org/10.1080/17436753.2018.1471443
Madiba, I. G.; Émond, N.; Chaker, M.; Khanyile, B. S.; Tadadjeu, S. I.; Zolliker, P.; Izerrouken, M.; Matinise, N.; Braun, A.; Nkosi, M.; et al. Effect of neutron irradiation on the structural, electrical and optical properties evolution of RPLD VO2 films. Nucl. Instrum. Methods Phys. Res. B 2019, 443, 25-30. https://doi.org/10.1016/j.nimb.2019.01.039
Makowska, M.; Pfeiffer, S.; Casati, N.; Florio, K.; Vetterli, M.; Wegener, K.; Graule, T.; van Swygenhoven, H. Pre-processing of hematite-doped alumina granules for selective laser melting. Ceram. Int. 2019, 45 (14), 17014-17022. https://doi.org/10.1016/j.ceramint.2019.05.251
Manoj, M.; Muhamed Ashraf, C.; Jasna, M.; Anilkumar, K. M.; Jinisha, B.; Pradeep, V. S.; Jayalekshmi, S. Biomass-derived, activated carbon-sulfur composite cathode with a bifunctional interlayer of functionalized carbon nanotubes for lithium-sulfur cells. J. Colloid Interface Sci. 2019, 535, 287-299. https://doi.org/10.1016/j.jcis.2018.09.096
Naikade, M.; Fankhänel, B.; Weber, L.; Ortona, A.; Stelter, M.; Graule, T. Studying the wettability of Si and eutectic Si-Zr alloy on carbon and silicon carbide by sessile drop experiments. J. Eur. Ceram. Soc. 2019, 39 (4), 735-742. https://doi.org/10.1016/j.jeurceramsoc.2018.11.049
Neumann, M.; Gehre, P.; Kuebler, J.; Dadivanyan, N.; Jelitto, H.; Schneider, G. A.; Aneziris, C. G. Stable crack propagation in free standing thermal sprayed Al2O3 and Al2O3—ZrO2—TiO2 coatings. Ceram. Int. 2019, 45 (7), 8761-8766. https://doi.org/10.1016/j.ceramint.2019.01.200
Németh, Z.; Szekeres, G. P.; Schabikowski, M.; Schrantz, K.; Traber, J.; Pronk, W.; Hernádi, K.; Graule, T. Enhanced virus filtration in hybrid membranes with MWCNT nanocomposite. R. Soc. Open Sci. 2019, 6 (1), 181294 (14 pp.). https://doi.org/10.1098/rsos.181294
Orlovskaya, N.; Lugovy, M.; Verbylo, D.; Reece, M. J.; Graule, T.; Kuebler, J. High temperature stiffening of ferroelastic LaCoO3. J. Eur. Ceram. Soc. 2019, 39, 3338-3343. https://doi.org/10.1016/j.jeurceramsoc.2019.03.052
Ożóg, P.; Blugan, G.; Kata, D.; Graule, T. Influence of the printing parameters on the quality of alumina ceramics shaped by UV-LCM technology. J. Ceram. Sci. Technol. 2019, 10 (2), 63-72. https://doi.org/10.4416/JCST2019-00023
Pfeiffer, S.; Florio, K.; Makowska, M.; Ferreira Sanchez, D.; Van Swygenhoven, H.; Aneziris, C. G.; Wegener, K.; Graule, T. Iron oxide doped spray dried aluminum oxide granules for selective laser sintering and melting of ceramic parts. Adv. Eng. Mater. 2019, 21 (6), 1801351 (14 pp.). https://doi.org/10.1002/adem.201801351
Rastogi, V. K.; Jiang, B.; Sturzenegger, P. N.; Gonzenbach, U. T.; Vetterli, M.; Blugan, G.; Kuebler, J. A processing route for dip-coating and characterization of multi-structured ceramic foam. Ceram. Int. 2019, 45 (17), 21887-21893. https://doi.org/10.1016/j.ceramint.2019.07.199
Savabieh, H.; Alizadeh, P.; Nayebi, B.; Clemens, F. J. Kinetics of crystallization in 13.2Li2O-67.6SiO2-14.49Al2O3-3.3TiO2-0.4BaO-0.97ZnO glass ceramic powder: Part I: a model-free vs. model-fitting approach. Ceram. Int. 2019, 45 (7), 8856-8865. https://doi.org/10.1016/j.ceramint.2019.01.214
Schabikowski, M.; Cichoń, A.; Németh, Z.; Kubiak, W.; Kata, D.; Graule, T. Electrospun iron and copper oxide fibers for virus retention applications. Text. Res. J. 2019, 89 (21-22), 4373-4382. https://doi.org/10.1177/0040517519834601
Sebastian, T.; Michalek, A.; Hedayati, M.; Lusiola, T.; Clemens, F. Enhancing dielectric properties of barium titanate macrofibers. J. Eur. Ceram. Soc. 2019, 39 (13), 3716-3721. https://doi.org/10.1016/j.jeurceramsoc.2019.05.040
Abbott, D. F.; Fabbri, E.; Borlaf, M.; Bozza, F.; Schäublin, R.; Nachtegaal, M.; Graule, T.; Schmidt, T. J. Operando X-ray absorption investigations into the role of Fe in the electrochemical stability and oxygen evolution activity of Ni1–xFexOy nanoparticles. J. Mater. Chem. A 2018, 6 (47), 24534-24549. https://doi.org/10.1039/c8ta09336a
Anilkumar, K. M.; Jinisha, B.; Manoj, M.; Pradeep, V. S.; Jayalekshmi, S. Layered sulfur/PEDOT:PSS nano composite electrodes for lithium sulfur cell applications. Appl. Surf. Sci. 2018, 442, 556-564. https://doi.org/10.1016/j.apsusc.2018.02.178
Ashraf, C. M.; Anilkumar, K. M.; Jinisha, B.; Manoj, M.; Pradeep, V. S.; Jayalekshmi, S. Acid washed, steam activated, coconut shell derived carbon for high power supercapacitor applications. J. Electrochem. Soc. 2018, 165 (5), A900-A909. https://doi.org/10.1149/2.0491805jes
Blugan, G.; Mata-Osoro, G.; Fecht, S.; Janczak-Rusch, J.; Kuebler, J. Torsional shear strength of steel joined with high performance aerospace adhesives at cryogenic and elevated temperatures. PLoS One 2018, 13 (11), e0206981 (14 pp.). https://doi.org/10.1371/journal.pone.0206981
Borlaf, M.; Frankowska, M.; Kubiak, W. W.; Graule, T. Ce3+ and Eu3+ emissions in YAG via a core-shell strategy for warm white LED lighting. J. Sol-Gel Sci. Technol. 2018, 86 (1), 1-6. https://doi.org/10.1007/s10971-018-4615-0
Borlaf, M.; Frankowska, M.; Kubiak, W. W.; Graule, T. Strong photoluminescence emission at low dopant amount in YAG:Ce and YAG:Eu phosphors. Mater. Res. Bull. 2018, 100, 413-419. https://doi.org/10.1016/j.materresbull.2018.01.005
Boudoire, F.; Partel, S.; Toth, R.; Heier, J. Combining parallel pattern generation of electrohydrodynamic lithography with serial addressing. RSC Adv. 2018, 8 (54), 30932-30936. https://doi.org/10.1039/C8RA06160B
Braun, A. "Thou shalt not make unto thee any graven image": some remarks on x-ray scattering and materials science. Microsc. Microanal. 2018, 24 (S2), 526-528. https://doi.org/10.1017/S1431927618014848
Braun, A. In situ photoelectron spectroscopy. In Encyclopedia of interfacial chemistry: surface science and electrochemistry; Wandelt, K., Ed.; Elsevier, 2018; pp 264-279. https://doi.org/10.1016/B978-0-12-409547-2.13291-3
Camps, I.; Borlaf, M.; Toudert, J.; de Andrés, A.; Colomer, M. T.; Moreno, R.; Serna, R. Evidencing early pyrochlore formation in rare-earth doped TiO2 nanocrystals: Structure sensing via VIS and NIR Er3+ light emission. J. Alloys Compd. 2018, 735, 2267-2274. https://doi.org/10.1016/j.jallcom.2017.11.262
Chen, X.; Sharp, I. D.; Cao, R.; Zheng, Y.; Zhao, C.; Braun, A. Introduction. J. Mater. Res. 2018, 33 (5), 517-518. https://doi.org/10.1557/jmr.2018.40
Clark Ligon, S.; Blugan, G.; Dalcanale, F.; Kuebler, J. Production of improved SiC and SiCN ceramics from polycarbosilane and polysilazane composites. Presented at the 9th international conference on times of polymers and composites: from aerospace to nanotechnology, Ischia, Naples, June 17-21, 2018; AIP conference proceedings; American Institute of Physics; Vol. 1981, p 020037 (4 pp.). https://doi.org/10.1063/1.5045899
Falk, G. S.; Borlaf, M.; López-Muñoz, M. J.; Fariñas, J. C.; Rodrigues Neto, J. B.; Moreno, R. Microwave-assisted synthesis of TiO2 nanoparticles: photocatalytic activity of powders and thin films. J. Nanopart. Res. 2018, 20 (2), Article:23 (10 pp.). https://doi.org/10.1007/s11051-018-4140-7
Falk, G. S.; Borlaf, M.; López-Muñoz, M. J.; Rodrigues Neto, J. B.; Moreno, R. Photocatalytic activity of nanocrystalline TiNb2O7 obtained by a colloidal sol-gel route. Ceram. Int. 2018, 44 (6), 7122-7127. https://doi.org/10.1016/j.ceramint.2018.01.153
Flak, D.; Chen, Q.; Simon Mun, B.; Liu, Z.; Rękas, M.; Braun, A. In situ ambient pressure XPS observation of surface chemistry and electronic structure of α-Fe2 O3 and γ-Fe2 O3 nanoparticles. Appl. Surf. Sci. 2018, 455, 1019-1028. https://doi.org/10.1016/j.apsusc.2018.06.002
Garcia, A. P.; Guaglianoni, W. C.; Garcia, D. R.; Soares, L. G.; de Oliveira Vaz, M.; Teixeira, S. R.; Pereira, M. B.; Basegio, T. M.; Clemens, F. J.; Alves, A. K.; et al. Facile synthesis by peroxide method and microwave-assisted hydrothermal treatment of TiO2 with high photocatalytic efficiency for dye degradation and hydrogen production. Chem. Sel. 2018, 3 (41), 11454-11459. https://doi.org/10.1002/slct.201802188
Gorjan, L.; Reiff, L.; Liersch, A.; Clemens, F. Ethylene vinyl acetate as a binder for additive manufacturing of tricalcium phosphate bio-ceramics. Ceram. Int. 2018, 44 (13), 15817-15823. https://doi.org/10.1016/j.ceramint.2018.05.260
Graczyk-Zajac, M.; Vrankovic, D.; Waleska, P.; Hess, C.; Sasikumar, P. V.; Lauterbach, S.; Kleebe, H. J.; Sorarù, G. D. The Li-storage capacity of SiOC glasses with and without mixed silicon oxycarbide bonds. J. Mater. Chem. A 2018, 6 (1), 93-103. https://doi.org/10.1039/c7ta09236a
Hadian, A.; Zamani, C.; Clemens, F. J. Effect of sintering temperature on microstructural evolution of M48 high speed tool steel bonded NbC matrix cemented carbides sintered in inert atmosphere. Int. J. Refract. Met. Hard Mater. 2018, 74, 20-27. https://doi.org/10.1016/j.ijrmhm.2018.02.021
Jinisha, B.; Anilkumar, K. M.; Manoj, M.; Abhilash, A.; Pradeep, V. S.; Jayalekshmi, S. Poly (ethylene oxide) (PEO)-based, sodium ion-conducting‚ solid polymer electrolyte films, dispersed with Al2O3 filler, for applications in sodium ion cells. Int. J. Ion. 2018, 24, 1675-1683. https://doi.org/10.1007/s11581-017-2332-2
Kim, B. J.; Cheng, X.; Abbott, D. F.; Fabbri, E.; Bozza, F.; Graule, T.; Castelli, I. E.; Wiles, L.; Danilovic, N.; Ayers, K. E.; et al. Highly active nanoperovskite catalysts for oxygen evolution reaction: insights into activity and stability of Ba0.5Sr0.5Co0.8Fe0.2O2+δ and PrBaCo2O5+δ. Adv. Funct. Mater. 2018, 28 (45), 1804355 (10 pp.). https://doi.org/10.1002/adfm.201804355
Kozielski, L.; Płońska, M.; Sebastian, T.; Clemens, F. Dielectric relaxation of Bi4Ti3O12 ceramics prepared by the low-temperature combustion synthesis. Phase Transit. 2018, 91 (9-10), 1081-1091. https://doi.org/10.1080/01411594.2018.1507033
Kozielski, L.; Feliksik, K.; Wodecka-Duś, B.; Szalbot, D.; Tutu, S. Hot pressed K0.5Na0.5NbO3 material for piezoelectric transformer for energy harvesting. Arch. Metall. Mater. 2018, 63 (3), 1275-1280. https://doi.org/10.24425/123801
Lugovy, M.; Orlovskaya, N.; Slyunyayev, V.; Mitrentsis, E.; Neumann, M.; Aneziris, C. G.; Jelitto, H.; Schneider, G. A.; Kuebler, J. Comparative study of static and cyclic fatigue of ZrB2-SiC ceramic composites. J. Eur. Ceram. Soc. 2018, 38 (4), 1128-1135. https://doi.org/10.1016/j.jeurceramsoc.2017.12.024
Lugovy, M.; Orlovskaya, N.; Pathak, S.; Radovic, M.; Lara-Curzio, E.; Verbylo, D.; Kuebler, J.; Graule, T.; Reece, M. J. Time and frequency dependent mechanical properties of LaCoO3-based perovskites: internal friction and negative creep. J. Appl. Phys. 2018, 124 (20), 205103 (8 pp.). https://doi.org/10.1063/1.5037049
Lugovy, M.; Aman, A.; Orlovskaya, N.; Slyunyayev, V.; Graule, T.; Kuebler, J.; Reece, M. J.; Chen, Y.; Ma, D.; An, K. Time and frequency dependent mechanical properties of LaCoO3-based perovskites: neutron diffraction and domain mobility. J. Appl. Phys. 2018, 124 (20), 205104 (9 pp.). https://doi.org/10.1063/1.5037051
Lusiola, T.; Oberle, S.; Gorjan, L.; Clemens, F. Effect of polymer-ceramic fibre interphase design on coupling factor in low fibre volume content piezoelectric composites. Adv. Mater. Sci. Eng. 2018, 2018, 6465783 (8 pp.). https://doi.org/10.1155/2018/6465783
Lusiola, T.; Gorjan, L.; Clemens, F. Preparation and characterization of potassium sodium niobate nanofibers by electrospinning. Int. J. Appl. Ceram. Technol. 2018, 15 (5), 1292-1300. https://doi.org/10.1111/ijac.12883
Maabong, K.; Machatine, A. G. J.; Mwankemwa, B. S.; Braun, A.; Bora, D. K.; Toth, R.; Diale, M. Nanostructured hematite thin films for photoelectrochemical water splitting. Physica B 2018, 535, 67-71. https://doi.org/10.1016/j.physb.2017.06.054
Madiba, I. G.; Braun, A.; Émond, N.; Chaker, M.; Tadadjeu, S. I.; Khanyile, B. S.; Maaza, M. Resonant photoemission spectroscopy of gamma irradiated VO2 films. MRS Adv. 2018, 3 (42-43), 2499-2503. https://doi.org/10.1557/adv.2018.356
Manoj, M.; Jasna, M.; Anilkumar, K. M.; Abhilash, A.; Jinisha, B.; Pradeep, V. S.; Jayalekshmi, S. Sulfur-polyaniline coated mesoporous carbon composite in combination with carbon nanotubes interlayer as a superior cathode assembly for high capacity lithium-sulfur cells. Appl. Surf. Sci. 2018, 458, 751-761. https://doi.org/10.1016/j.apsusc.2018.07.113
Michálek, M.; Michálková, M.; Blugan, G.; Kuebler, J. Effect of carbon contamination on the sintering of alumina ceramics. J. Eur. Ceram. Soc. 2018, 38, 193-199. https://doi.org/10.1016/j.jeurceramsoc.2017.08.011
Michálek, M.; Michálková, M.; Blugan, G.; Kuebler, J. Strength of pure alumina ceramics above 1 GPa. Ceram. Int. 2018, 44 (3), 3255-3260. https://doi.org/10.1016/j.ceramint.2017.11.098
Michálková, M.; Michálek, M.; Blugan, G.; Kuebler, J. The influence of spinel and magnesia powder bed on mechanical properties of alumina sintered under air and nitrogen atmosphere. Adv. Appl. Ceram. 2018, 117 (8), 485-492. https://doi.org/10.1080/17436753.2018.1502063
Ożóg, P.; Kata, D.; Graule, T. Tape casting of UV-curable aluminium nitride-based slurries. Ceram. Int. 2018, 44 (18), 22800-22807. https://doi.org/10.1016/j.ceramint.2018.09.071
Roussenq Cesconeto, F.; Borlaf, M.; Nieto, M. I.; Novaes de Oliveira, A. P.; Moreno, R. Synthesis of CaTiO3 and CaTiO3/TiO2 nanoparticulate compounds through Ca2+/TiO2 colloidal sols: structural and photocatalytic characterization. Ceram. Int. 2018, 44 (1), 301-309. https://doi.org/10.1016/j.ceramint.2017.09.173
Rowthu, S.; Saeidi, F.; Wasmer, K.; Hoffmann, P.; Kuebler, J. Flexural strength evaluations and fractography analyses of slip cast mesoporous submicron alumina. Ceram. Int. 2018, 44 (5), 5193-5201. https://doi.org/10.1016/j.ceramint.2017.12.125
Simfukwe, J.; Mapasha, R. E.; Braun, A.; Diale, M. Density functional theory study of Cu doped {0001} and {01ī2} surfaces of hematite for water splitting. MRS Adv. 2018, 3 (13), 669-678. https://doi.org/10.1557/adv.2018.180
Szekeres, G. P.; Németh, Z.; Schrantz, K.; Németh, K.; Schabikowski, M.; Traber, J.; Pronk, W.; Hernádi, K.; Graule, T. Copper-coated cellulose-based water filters for virus retention. ACS Omega 2018, 3 (1), 446-454. https://doi.org/10.1021/acsomega.7b01496
Szekeres, G. P.; Nemeth, Z.; Schrantz, K.; Hernadi, K.; Graule, T. Insights into pore size control in cellulose nanopapers through modeling and experiments. J. Nanosci. Nanotechnol. 2018, 18 (4), 3000-3005. https://doi.org/10.1166/jnn.2018.14536
Vallachira Warriam Sasikumar, P.; Blugan, G.; Casati, N.; Kakkava, E.; Panusa, G.; Psaltis, D.; Kuebler, J. Polymer derived silicon oxycarbide ceramic monoliths: microstructure development and associated materials properties. Ceram. Int. 2018, 44 (17), 20961-20967. https://doi.org/10.1016/j.ceramint.2018.08.102
Čejková, J.; Tóth, R.; Braun, A.; Branicki, M.; Ueyama, D.; Lagzi, I. Shortest path finding in mazes by active and passive particles. In Shortest path solvers. From software to wetware; Adamatzky, A., Ed.; Emergence, complexity and computation, Vol. 32; Springer: Cham, 2018; pp 401-408. https://doi.org/10.1007/978-3-319-77510-4_15
Aman, A.; Jordan, R.; Chen, Y.; Stadelmann, R.; Lugovy, M.; Orlovskaya, N.; Payzant, E. A.; dela Cruz, C.; Reece, M. J.; Graule, T.; et al. Non-congruence of high-temperature mechanical and structural behaviors of LaCoO3 based perovskites. J. Eur. Ceram. Soc. 2017, 37 (4), 1563-1576. https://doi.org/10.1016/j.jeurceramsoc.2016.11.005
Blugan, G.; Strehler, C.; Vetterli, M.; Ehrle, B.; Duttlinger, R.; Blösch, P.; Kuebler, J. Performance of lightweight coated oxide ceramic composites for industrial high speed wood cutting tools: a step closer to market. Ceram. Int. 2017, 43 (12), 8735-8742. https://doi.org/10.1016/j.ceramint.2017.04.005
Bora, D. K.; Müller, U.; Constable, E. C.; Braun, A. Highly electrochemically stable morphology of mesoscale Co3O4 flowerlike oriented aggregate (FLOA) for electrocatalytic water splitting. J. Electrochem. Soc. 2017, 164 (7), H526-H536. https://doi.org/10.1149/2.1451707jes
Borlaf, M.; Kubrin, R.; Aseev, V.; Petrov, A. Y.; Nikonorov, N.; Graule, T. Deep submicrometer YAG:Ce phosphor particles with high photoluminescent quantum yield prepared by flame spray synthesis. J. Am. Ceram. Soc. 2017, 100 (8), 3784-3793. https://doi.org/10.1111/jace.14905
Braun, A.; Chen, Q. Experimental neutron scattering evidence for proton polaron in hydrated metal oxide proton conductors. Nat. Commun. 2017, 8, 15830 (8 pp.). https://doi.org/10.1038/ncomms15830
Braun, A.; Maabong, K.; Diale, M. M.; Toth, R. Hydrogen production with holes: what we learn from operando studies. SPIE Newsroom, 2017, p (4 pp.). https://doi.org/10.1117/2.1201704.006793
Braun, A.; Diale, M.; Malherbe, J. B.; Braun, M. Introduction. J. Mater. Res. 2017, 32 (21), 3921-3923. https://doi.org/10.1557/jmr.2017.426
Braun, A. X-ray studies on electrochemical systems. Synchrotron methods for energy materials; De Gruyter Textbook; De Gruyter: Berlin, 2017; 492 p. https://doi.org/10.1515/9783110427882
Camps, I.; Borlaf, M.; Colomer, M. T.; Moreno, R.; Duta, L.; Nita, C.; Perez del Pino, A.; Logofatu, C.; Serna, R.; György, E. Structure-property relationships for Eu doped TiO2 thin films grown by a laser assisted technique from colloidal sols. RSC Adv. 2017, 7 (60), 37643-37653. https://doi.org/10.1039/c7ra05074g
Chen, Q.; Braun, A. Protons and the hydrogen economy. MRS Energy Sustain. 2017, 4, E14 (4 pp.). https://doi.org/10.1557/mre.2017.16
Dalcanale, F. Polymer derived ceramics process in biomedical applications: pacemaker electrode. Doctoral dissertation, ETH Zürich, Zürich, 2017, 134 p. https://doi.org/10.3929/ethz-b-000245156
Durdina, L.; Brem, B. T.; Setyan, A.; Siegerist, F.; Rindlisbacher, T.; Wang, J. Assessment of particle pollution from jetliners: from smoke visibility to nanoparticle counting. Environ. Sci. Technol. 2017, 51 (6), 3534-3541. https://doi.org/10.1021/acs.est.6b05801
El-Nasser, S. A. Fabrication and characterization of semiconductor based photo-catalysis for light-driven water splitting. Master thesis, 2017, 110 p.
Fabbri, E.; Nachtegaal, M.; Binninger, T.; Cheng, X.; Kim, B. J.; Durst, J.; Bozza, F.; Graule, T.; Schäublin, R.; Wiles, L.; et al. Dynamic surface self-reconstruction is the key of highly active perovskite nano-electrocatalysts for water splitting. Nat. Mater. 2017, 16 (9), 925-931. https://doi.org/10.1038/nmat4938
Falk, G.; Borlaf, M.; López-Muñoz, M. J.; Fariñas, J. C.; Rodrigues Neto, J. B.; Moreno, R. Microwave-assisted synthesis of Nb2O5 for photocatalytic application of nanopowders and thin films. J. Mater. Res. 2017, 32 (17), 3271-3278. https://doi.org/10.1557/jmr.2017.93
Gorjan, L.; Lusiola, T.; Scharf, D.; Clemens, F. Kinetics and equilibrium of eco-debinding of PZT ceramics shaped by thermoplastic extrusion. J. Eur. Ceram. Soc. 2017, 37, 5273-5280. https://doi.org/10.1016/j.jeurceramsoc.2017.04.063
He, X.; Mitrano, D. M.; Nowack, B.; Kyoung Bahk, Y.; Figi, R.; Schreiner, C.; Bürki, M.; Wang, J. Agglomeration potential of TiO2 in synthetic leachates made from the fly ash of different incinerated wastes. Environ. Pollut. 2017, 223, 616-623. https://doi.org/10.1016/j.envpol.2017.01.065
Hu, Y. Defects on surface and interface for photoelectrochemical properties of hematite photoanodes. Doctoral dissertation, Swiss Federal Institute of Technology Lausanne (EPFL), Lausanne, 2017, 113 p. https://doi.org/10.5075/epfl-thesis-7566
Kastyl, J.; Chlup, Z.; Clemens, F.; Trunec, M. Mechanical properties of zirconia core-shell rods with porous core and dense shell prepared by thermoplastic co-extrusion. J. Eur. Ceram. Soc. 2017, 37, 2439-2447. https://doi.org/10.1016/j.jeurceramsoc.2017.02.006
Kim, B. J.; Abbott, D. F.; Cheng, X.; Fabbri, E.; Nachtegaal, M.; Bozza, F.; Castelli, I. E.; Lebedev, D.; Schäublin, R.; Copéret, C.; et al. Unraveling thermodynamics, stability, and oxygen evolution activity of strontium ruthenium perovskite oxide. ACS Catal. 2017, 7 (5), 3245-3256. https://doi.org/10.1021/acscatal.6b03171
Kubrin, R.; Blugan, G.; Kuebler, J. Influence of cerium doping on mechanical properties of tetragonal scandium-stabilized zirconia. J. Eur. Ceram. Soc. 2017, 37 (4), 1651-1656. https://doi.org/10.1016/j.jeurceramsoc.2016.11.038
Ligon, S. C.; Liska, R.; Stampfl, J.; Gurr, M.; Mülhaupt, R. Polymers for 3D printing and customized additive manufacturing. Chem. Rev. 2017, 117 (15), 10212-10290. https://doi.org/10.1021/acs.chemrev.7b00074
Lyson-Sypien, B.; Kusior, A.; Rekas, M.; Zukrowski, J.; Gajewska, M.; Michalow-Mauke, K.; Graule, T.; Radecka, M.; Zakrzewska, K. Nanocrystalline TiO2/SnO2 heterostructures for gas sensing. Beilstein J. Nanotechnol. 2017, 8, 108-122. https://doi.org/10.3762/bjnano.8.12
Madiba, I. G.; Émond, N.; Chaker, M.; Thema, F. T.; Tadadjeu, S. I.; Muller, U.; Zolliker, P.; Braun, A.; Kotsedi, L.; Maaza, M. Effects of gamma irradiations on reactive pulsed laser deposited vanadium dioxide thin films. Appl. Surf. Sci. 2017, 411, 271-278. https://doi.org/10.1016/j.apsusc.2017.03.131
Melnykowycz, M.; Tschudin, M.; Clemens, F. Piezoresistive carbon-based hybrid sensor for body-mounted biomedical applications. In 4th international conference on competitive materials and technology processes (IC-CMTP4), presented at the 4th international conference on competitive materials and technology processes (IC-CMTP4), Miskolc, Hungary, October 3-7, 2016; IOP conference series: materials science and engineering; IOP, 2017; Vol. 175, p 012006 (6 pp.). https://doi.org/10.1088/1757-899X/175/1/012006
Melnykowycz, M.; Tschudin, M.; Selle, R.; Maynard, K. R.; Richards-Kortum, R. R.; Oden, Z. M.; Clemens, F. J. Soft condensed matter hybrid fiber sensors for vital function monitoring. Presented at the 7th forum on new materials - part D, Perugia, Italy, June 5-9, 2016; Vincenzini, P., Ed.; Advances in science and technology; Trans Tech Publications; Vol. 100, pp 79-84. https://doi.org/10.4028/www.scientific.net/AST.100.79
Michalek, A. Synthesis of BaTiO3 Nanofibers and their influence on the properties of BaTiO3 based composite fibers. Bachelor thesis, 2017, 76 p.
Moore, G. J. Charge carrier dynamics in semiconductor-electrolyte interface of hematite based per water-splitting cell. Master thesis, 2017, 115 p.
Moszner, F.; Mata-Osoro, G.; Chiodi, M.; Janczak-Rusch, J.; Blugan, G.; Kuebler, J. Mechanical behavior of SiC joints brazed using an active Ag-Cu-In-Ti braze at elevated temperatures. Int. J. Appl. Ceram. Technol. 2017, 14, 703-711. https://doi.org/10.1111/ijac.12689
Norton, B.; Balick, M.; Hobday, R.; Fournier, C.; Scartezzini, J. L.; Solt, J.; Braun, A. Daylight: contexts and concepts. In Changing perspectives on daylight: science, technology, and culture; Sander, S., Oberst, J., Eds.; American Association for the Advancement of Science (AAAS): Washington DC, 2017; pp 4-8. http://www.sciencemag.org/collections/changing-perspectives-daylight-science-technology-and-culture
Rubenis, K.; Populoh, S.; Thiel, P.; Yoon, S.; Müller, U.; Locs, J. Thermoelectric properties of dense Sb-doped SnO2 ceramics. J. Alloys Compd. 2017, 692, 515-521. https://doi.org/10.1016/j.jallcom.2016.09.062
Savabieh, H.; Alizadeh, P.; Arroyo Rojas Dasilva, Y.; Erni, R.; Clemens, F. J. Investigation of dielectric properties and microstructure of sintered 13·2Li2O − 67·6SiO2 − 14.49Al2O3 − 3·3TiO2 − 0.4BaO − 0.97ZnO glass-ceramics. J. Eur. Ceram. Soc. 2017, 37 (2), 631-639. https://doi.org/10.1016/j.jeurceramsoc.2016.09.009
Schabikowski, M.; Niżnik, A.; Kata, D.; Graule, T. The adsorption of polystyrene nanoparticles on selected commercially available fibers: a streaming potential study. Text. Res. J. 2017, 88 (24), 2841-2853. https://doi.org/10.1177/0040517517732082
Schrantz, K.; Wyss, P. P.; Ihssen, J.; Toth, R.; Bora, D. K.; Vitol, E. A.; Rozhkova, E. A.; Pieles, U.; Thöny-Meyer, L.; Braun, A. Hematite photoanode co-functionalized with self-assembling melanin and C-phycocyanin for solar water splitting at neutral pH. Catal. Today 2017, 284, 44-51. https://doi.org/10.1016/j.cattod.2016.10.025
Sebastian, T.; Lusiola, T.; Clemens, F. Ferroelectric hybrid fibers to develop flexible sensors for shape sensing of smart textiles and soft condensed matter bodies. Smart Mater. Struct. 2017, 26, 045003 (11 pp.). https://doi.org/10.1088/1361-665X/aa5bd2
Stechmann, G.; Zaefferer, S.; Schwarz, T.; Konijnenberg, P.; Raabe, D.; Gretener, C.; Kranz, L.; Perrenoud, J.; Buecheler, S.; Tiwari, A. N. A correlative investigation of grain boundary crystallography and electronic properties in CdTe thin film solar cells. Sol. Energy Mater. Sol. Cells 2017, 166, 108-120. https://doi.org/10.1016/j.solmat.2017.03.022
Wang, J.; Schlagenhauf, L.; Setyan, A. Transformation of the released asbestos, carbon fibers and carbon nanotubes from composite materials and the changes of their potential health impacts. J. Nanobiotechnol. 2017, 15, 15 (16 pp.). https://doi.org/10.1186/s12951-017-0248-7
Bora, D. K. The photocathodic behavior of hierarchical ZnO/hematite hetero nanoarchitectures. J. Mater. Res. 2016, 31 (11), 1554-1564. https://doi.org/10.1557/jmr.2016.107
Bozza, F.; Bator, K.; Kubiak, W. W.; Graule, T. Effects of Ni doping on the sintering and electrical properties of BaZr0.8Y0.2O3−δ proton conducting electrolyte prepared by Flame Spray Synthesis. J. Eur. Ceram. Soc. 2016, 36 (1), 101-107. https://doi.org/10.1016/j.jeurceramsoc.2015.09.010
Braun, A. Chapter 1: Structure and Transport Properties in Ceramic Fuel Cells (SOFC), Components, and Materials. In Structural Characterization Techniques: Advances and Applications in Clean Energy; Malavasi, L., Ed.; Pan Stanford, 2016; pp 1-57.
Braun, A.; Diale, M.; Huthwelker, T.; van Bokhoven, J. A. International exploratory workshop on catalysis, photoelectrochemistry, and X-ray spectroscopy for renewable energy. Synchrotron Radiation News, 2016, pp 14-16. https://doi.org/10.1080/08940886.2016.1124677
Braun, A.; Gaillard, N.; Miller, E. L.; Wang, H. Introduction. J. Mater. Res. 2016, 31 (11), 1545-1546. https://doi.org/10.1557/jmr.2016.222
Braun, A.; Diale, M. M.; Maabong, K. D.; Toth, R. Safe and decentralised hydrogen fuel production and storage for residential building and mobility applications. In Proceedings of the 6th international disaster and risk conference. IDRC Davos 2016. Extended abstracts collection, presented at the 6th International disaster and risk conference, IDRC 2016. Integrative risk managmenet - towards resilient cities, Davos, Switzerland, August 28 - September 1, 2016; Stal, M., Sigrist, D., Wahlen, S., Portmann, P., Glover, J., Bernabe, N., Moy de Vitry, D., Ammann, W. J., Eds.; IDRC conference proceedings; Global Risk Forum GRF Davos: Davos, Switzerland, 2016; pp 102-105.
Braun, A.; Hu, Y.; Boudoire, F.; Bora, D. K.; Sarma, D. D.; Grätzel, M.; Eggleston, C. M. The electronic, chemical and electrocatalytic processes and intermediates on iron oxide surfaces during photoelectrochemical water splitting. Catal. Today 2016, 260, 72-81. https://doi.org/10.1016/j.cattod.2015.07.024
Bull, L.; Toth, R.; Stone, C.; De Lacy Costello, B.; Adamatzky, A. Light-sensitive belousov–zhabotinsky computing through simulated evolution. In Advances in unconventional computing; Adamatzky, A., Ed.; Emergence, complexity and computation, Vol. 23; Springer: Switzerland, 2016; pp 199-212. https://doi.org/10.1007/978-3-319-33921-4_8
Cancellieri, C.; Moszner, F.; Chiodi, M.; Yoon, S.; Janczak-Rusch, J.; Jeurgens, L. P. H. The effect of thermal treatment on the stress state and evolving microstructure of Cu/W nano-multilayers. J. Appl. Phys. 2016, 120 (19), 195107 (9 pp.). https://doi.org/10.1063/1.4967992
Dalcanale, F.; Grossenbacher, J.; Blugan, G.; Gullo, M. R.; Brugger, J.; Tevaearai, H.; Graule, T.; Kuebler, J. Rapid carbon nanotubes suspension in organic solvents using organosilicon polymers. J. Colloid Interface Sci. 2016, 470, 123-131. https://doi.org/10.1016/j.jcis.2016.02.050
Debras, C.; Liu, Y.; van Garderen, N.; Minisini, B.; Graule, T.; Clemens, F. J. Development of granular materials for fluidized bed process: measuring attrition resistance with a horizontal ball milling device and its mathematical description. Powder Technol. 2016, 288, 157-163. https://doi.org/10.1016/j.powtec.2015.10.047
Falk, G.; Borlaf, M.; Bendo, T.; Novaes de Oliveira, A. P.; Rodrigues Neto, J. B.; Moreno, R. Colloidal sol-gel synthesis and photocatalytic activity of nanoparticulate Nb2O5 sols. J. Am. Ceram. Soc. 2016, 99 (6), 1968-1973. https://doi.org/10.1111/jace.14217
Fleischhauer, F. On the strength and failure of an electrolyte supported solid oxide fuel cell. Doctoral dissertation, Montanuniversität Leoben, Leoben, 2016.
Fröhlich, K. A.; Mitrentsis, E.; Clemens, F.; Hoffmann, B.; Michaud, V.; Graule, T. Assessment of the dispersion quality of refractive index-matched nanodispersions. Appl. Rheol. 2016, 26 (6), 65050 (10 pp.). https://doi.org/10.3933/ApplRheol-26-65050
Garcia, A. P.; Rocha, I. C. L.; dos Santos, P. H. F.; Basegio, T. M.; Pereira, M. B.; Clemens, F. J.; Alves, A. K.; Bergmann, C. P. Low energy consumption synthesis of nanostructured TiO particles by combining oxidant peroxide method and microwave-assisted hydrothermal treatment. J. Nanomater. 2016, 2016, 4910536 (9 pp.). https://doi.org/10.1155/2016/4910536
Gorjan, L.; Boretius, M.; Blugan, G.; Gili, F.; Mangherini, D.; Lizarralde, X.; Ferraris, M.; Graule, T.; Igartua, A.; Mendoza, G.; et al. Ceramic protection plates brazed to aluminum brake discs. Ceram. Int. 2016, 42 (14), 15739-15746. https://doi.org/10.1016/j.ceramint.2016.07.035
Graule, T.; Ozog, P.; Durif, C.; Wilkens-Heinecke, J.; Kata, D. Synthesis of ceramic-based porous gradient structures for applications in energy conversion and related fields. Funct. Mater. Lett. 2016, 9 (4), 1641001 (4 pp.). https://doi.org/10.1142/S1793604716410010
Gędziorowski, B.; Tobola, J.; Braun, A.; Molenda, J. Impact of crystal structure singularity on transport and electrochemical properties of Lix(LiyFezV1−y−z )O2 — electrode material for lithium batteries. Funct. Mater. Lett. 2016, 9 (4), 1641006 (12 pp.). https://doi.org/10.1142/S179360471641006X
Hu, Y.; Boudoire, F.; Herrmann-Geppert, I.; Bogdanoff, P.; Tsekouras, G.; Mun, B. S.; Fortunato, G.; Graetzel, M.; Braun, A. Molecular origin and electrochemical influence of capacitive surface states on iron oxide photoanodes. J. Phys. Chem. C 2016, 120 (6), 3250-3258. https://doi.org/10.1021/acs.jpcc.5b08013
Huber, L.; Ruch, P.; Hauert, R.; Matam, S. K.; Saucke, G.; Yoon, S.; Zhang, Y.; Koebel, M. M. Water sorption behavior of physically and chemically activated monolithic nitrogen doped carbon for adsorption cooling. RSC Adv. 2016, 6 (84), 80729-80738. https://doi.org/10.1039/C6RA18660B
Jiang, B.; Blugan, G.; Sturzenegger, P. N.; Gonzenbach, U. T.; Misson, M.; Thornberry, J.; Stenerud, R.; Cartlidge, D.; Kuebler, J. Ceramic spheres–a novel solution to deep sea buoyancy modules. Materials 2016, 9 (7), 529 (13 pp.). https://doi.org/10.3390/ma9070529
Klimkevicius, V.; Makuska, R.; Graule, T. Rheology of titania based ceramic nanodispersions stabilized by cationic comb copolymers. Appl. Rheol. 2016, 26 (1), 15199 (9 pp.). https://doi.org/10.3933/ApplRheol-26-15199
Knies, F.; Schrantz, K.; Aneziris, C.; Gauckler, L.; Graule, T. Superhydrophilic ceramic glazes for sanitaryware. J. Ceram. Sci. Technol. 2016, 7 (1), 53-63. https://doi.org/10.4416/JCST2015-00024
Kozielski, L.; Adamczyk, M.; Feliksik, K.; Bochenek, D.; Clemens, F. PLZT microfibers technology optimization. Arch. Metall. Mater. 2016, 61 (3), 1471-1476. https://doi.org/10.1515/amm-2016-0241
Kozielski, L.; Pilch, M.; Lusiola, T.; Clemens, F. PLZT microfibers volume gradients and anisotropy. Ferroelectrics 2016, 498 (1), 102-110. https://doi.org/10.1080/00150193.2016.1169059
Kozielski, L.; Clemens, F.; Lusiola, T.; Pilch, M. Uniaxial extrusion as an enhancement method of piezoelectric properties of ceramic micro fibers. J. Alloys Compd. 2016, 687, 604-610. https://doi.org/10.1016/j.jallcom.2016.06.050
Kubrin, R.; Graule, T. Modelling of the luminescent properties of nanophosphor coatings with different porosity. Optics Spectrosc. 2016, 121 (4), 553-559. https://doi.org/10.1134/S0030400X16100106
Liu, Y.; Kirchesch, P.; Remhof, A.; Graule, T.; Liersch, A.; Clemens, F. Development of oxygen carriers for chemical looping combustion: effects of support microstructure on the performance of oxygen carriers. Microporous Mesoporous Mater. 2016, 232, 264-272. https://doi.org/10.1016/j.micromeso.2016.06.022
Liu, Y.; Kirchesch, P.; Graule, T.; Liersch, A.; Clemens, F. Development of oxygen carriers for chemical looping combustion: the chemical interaction between CuO and silica/γ-alumina granules with similar microstructure. Fuel 2016, 186, 496-503. https://doi.org/10.1016/j.fuel.2016.08.090
Lugovy, M.; Slyunyayev, V.; Orlovskaya, N.; Reece, M.; Graule, T.; Kuebler, J. Cyclic fatigue effect in particulate ceramic composites. J. Eur. Ceram. Soc. 2016, 36 (14), 3257-3266. https://doi.org/10.1016/j.jeurceramsoc.2016.05.020
Lugovy, M.; Slyunyayev, V.; Orlovskaya, N.; Mitrentsis, E.; Aneziris, C. G.; Graule, T.; Kuebler, J. Temperature dependence of elastic properties of ZrB2–SiC composites. Ceram. Int. 2016, 42 (2), 2439-2445. https://doi.org/10.1016/j.ceramint.2015.10.044
Lusiola, T.; Clemens, F. Fabrication of one-dimensional ferroelectric nano- and microstructures by different spinning techniques and their characterization. In Nanoscale ferroelectrics and multiferroics. Key processing and characterization issues, and nanoscale effects; Algueró, M., Gregg, J. M., Mitoseriu, L., Eds.; Wiley: Hoboken, 2016; pp 232-268. https://doi.org/10.1002/9781118935743.ch9
Lusiola, T.; Soppelsa, A.; Rubio-Marcos, F.; Fernandez, J. F.; Clemens, F. The impact of microstructure in (K,Na)NbO3-based lead-free piezoelectric fibers: from processing to device production for structural health monitoring. J. Eur. Ceram. Soc. 2016, 36 (11), 2745-2754. https://doi.org/10.1016/j.jeurceramsoc.2016.04.009
Maabong, K.; Hu, Y.; Braun, A.; Machatine, A. G. J.; Diale, M. Influence of anodization time on the surface modifications on α-Fe2O3 photoanode upon anodization. J. Mater. Res. 2016, 31 (11), 1580-1587. https://doi.org/10.1557/jmr.2016.53
Maabong, K.; Machatine, A. G.; Hu, Y.; Braun, A.; Nambala, F. J.; Diale, M. Morphology, structural and optical properties of iron oxide thin film photoanodes in photoelectrochemical cell: effect of electrochemical oxidation. Physica B 2016, 480, 91-94. https://doi.org/10.1016/j.physb.2015.08.010
Melnykowycz, M.; Tschudin, M.; Clemens, F. Piezoresistive soft condensed matter sensor for body-mounted vital function applications. Sensors 2016, 16 (3), 326 (19 pp.). https://doi.org/10.3390/s16030326
Michálek, M.; Tewari, A.; Blugan, G.; Bowen, P.; Hofmann, H.; Graule, T.; Kuebler, J. New approach to low thermal conductivity of thermal barrier protection with improved mechanical integrity. Ceram. Int. 2016, 42 (6), 6817-6824. https://doi.org/10.1016/j.ceramint.2016.01.059
Michálková, M.; Michálek, M.; Galusek, D.; Blugan, G.; Kuebler, J.; Šajgalík, P. Separation of CNF agglomerates from a ceramic suspension by spray drying technique. Ceram. Int. 2016, 42 (14), 15787-15792. https://doi.org/10.1016/j.ceramint.2016.07.044
Mohammadi, M.; Alizadeh, P.; Clemens, F. J. Effect of SiO2 on sintering and dielectric properties of CaCu3Ti4O12 nanofibers. J. Alloys Compd. 2016, 688, 270-279. https://doi.org/10.1016/j.jallcom.2016.06.245
Mohammadi, M.; Alizadeh, P.; Clemens, F. J. Effect of using different precursors on electrospinning of CaCu3Ti4O12. Ceram. Int. 2016, 42 (4), 4690-4699. https://doi.org/10.1016/j.ceramint.2015.11.119
Moszner, F.; Cancellieri, C.; Chiodi, M.; Yoon, S.; Ariosa, D.; Janczak-Rusch, J.; Jeurgens, L. P. H. Thermal stability of Cu/W nano-multilayers. Acta Mater. 2016, 107, 345-353. https://doi.org/10.1016/j.actamat.2016.02.003
Ramachandran, D. K.; Søgaard, M.; Clemens, F.; Sudireddy, B. R.; Kaiser, A. Low cost porous MgO substrates for oxygen transport membranes. Mater. Lett. 2016, 169, 254-256. https://doi.org/10.1016/j.matlet.2016.01.142
Regonini, D.; Chen, G.; Leach, C.; Clemens, F. J. Comparison of photoelectrochemical properties of TiO2 Nanotubes and sol-gel. Electrochim. Acta 2016, 213, 31-36. https://doi.org/10.1016/j.electacta.2016.07.097
Regonini, D.; Groff, A.; Sorarù, G. D.; Clemens, F. J. Suppressing deep traps in self-organized TiO2 nanotubes by Nb doping and optimized water content. J. Electrochem. Soc. 2016, 163 (3), H243-H251. https://doi.org/10.1149/2.0131605jes
Schabikowski, M.; Zalewska, M.; Kata, D.; Graule, T. The effect of CuO coatings on the electrokinetic properties of stone wool fibres determined by streaming potential measurements. Ceram. Int. 2016, 42 (12), 13944-13951. https://doi.org/10.1016/j.ceramint.2016.05.207
Suzuno, K.; Ueyama, D.; Branicki, M.; Tóth, R.; Braun, A.; Lagzi, I. Marangoni Flow Driven Maze Solving. In Advances in unconventional computing; Adamatzky, A., Ed.; Emergence, Complexity and Computation, Vol. 23; Springer: Cham, Switzerland, 2016; pp 237-243. https://doi.org/10.1007/978-3-319-33921-4_10
Szafraniak-Wiza, I.; Kozielski, L.; Sebastian, T. Preparation and properties of Ba1–xCaxTiO3 nanopowders obtained by mechanochemical synthesis. Phase Transit. 2016, 89 (7–8), 803-807. https://doi.org/10.1080/01411594.2016.1198962
Tóth, R.; Walliser, R. M.; Murray, N. S.; Bora, D. K.; Braun, A.; Fortunato, G.; Housecroft, C. E.; Constable, E. C. A self-assembled, multicomponent water oxidation device. Chem. Commun. 2016, 52 (14), 2940-2943. https://doi.org/10.1039/c5cc09556e
Tóth, R.; Walliser, R. M.; Lagzi, I.; Boudoire, F.; Düggelin, M.; Braun, A.; Housecroft, C. E.; Constable, E. C. Probing the mystery of Liesegang band formation: revealing the origin of self-organized dual-frequency micro and nanoparticle arrays. Soft Matter 2016, 12 (40), 8367-8374. https://doi.org/10.1039/C6SM01564F
Walliser, R. M.; Tóth, R.; Lagzi, I.; Mathys, D.; Marot, L.; Braun, A.; Housecroft, C. E.; Constable, E. C. Understanding the formation of aligned, linear arrays of Ag nanoparticles. RSC Adv. 2016, 6 (34), 28388-28392. https://doi.org/10.1039/C6RA04194A
Wang, J. J.; Hu, Y.; Toth, R.; Fortunato, G.; Braun, A. A facile nonpolar organic solution process of a nanostructured hematite photoanode with high efficiency and stability for water splitting. J. Mater. Chem. A 2016, 4 (8), 2821-2825. https://doi.org/10.1039/C5TA06439B
Zare-Eelanjegh, E.; Bora, D. K.; Rupper, P.; Schrantz, K.; Thöny-Meyer, L.; Maniura-Weber, K.; Richter, M.; Faccio, G. Affinity-driven immobilization of proteins to hematite nanoparticles. ACS Appl. Mater. Interfaces 2016, 8 (31), 20432-20439. https://doi.org/10.1021/acsami.6b03284
Adamaki, V.; Sergejevs, A.; Clarke, C.; Clemens, F.; Marken, F.; Bowen, C. R. Sub-stoichiometric functionally graded titania fibres for water-splitting applications. J. Semicond. 2015, 36 (6), 063001 (6 pp.). https://doi.org/10.1088/1674-4926/36/6/063001
Alapi, T.; Simon, G.; Veréb, G.; Kovács, K.; Arany, E.; Schrantz, K.; Dombi, A.; Hernádi, K. Toxicology aspects of the decomposition of diuron by advanced oxidation processes. Hungarian J. of Ind. Chem. 2015, 43 (1), 25-32. https://doi.org/10.1515/hjic-2015-0005
Bora, D. K.; Braun, A. Assessment of the electronic structure of solar water splitting photo-electrodes with X-ray and electron spectroscopy. In From molecules to materials: pathways to artificial photosynthesis; Rozhkova, E. A., Ariga, K., Eds.; Springer: Berlin, 2015; pp 297-321. https://doi.org/10.1007/978-3-319-13800-8_11
Bora, D. K. Fabrication of silicon doped hematite photoelectrode with enhanced photocurrent density via solution processing of an in-situ TEOS modified precursor. Mater. Sci. Semicond. Process. 2015, 31 (5), 728-738. https://doi.org/10.1016/j.mssp.2014.11.026
Bora, D. K.; Braun, A.; Gajda-Schrantz, K. Solar Photoelectrochemical Water Splitting with Bioconjugate and Bio-Hybrid Electrodes. In From molecules to materials: pathways to artificial photosynthesis; Rozhkova, E. A., Ariga, K., Eds.; Springer: Berlin, 2015; pp 125-147. https://doi.org/10.1007/978-3-319-13800-8_5
Bortolani, F.; Michen, M. I.; Graule, T.; Clemens, F. Small and large signal ferroelectric properties of single lead zirconium titanate fibers. J. Intell. Mater. Syst. Struct. 2015, 26 (7), 865-871. https://doi.org/10.1177/1045389X14533434
Boudoire, F. Self-assembled photonic mesostructures for water splitting photoanodes. Doctoral dissertation, University of Basel, Basel, 2015, 117 p. http://edoc.unibas.ch/36693/
Bozza, F.; Arroyo, Y.; Graule, T. Flame spray synthesis of BaZr0.8Y0.2O3-δelectrolyte nanopowders for intermediate temperature proton conducting fuel cells. Fuel Cells 2015, 15 (4), 588-594. https://doi.org/10.1002/fuce.201400179
Braun, A.; Boudoire, F.; Bora, D. K.; Faccio, G.; Hu, Y.; Kroll, A.; Mun, B. S.; Wilson, S. T. Biological components and bioelectronic interfaces of water splitting photoelectrodes for solar hydrogen production. Chem. Eur. J. 2015, 21 (11), 4188-4199. https://doi.org/10.1002/chem.201405123
Braun, A.; Nordlund, D.; Song, S. W.; Huang, T. W.; Sokaras, D.; Liu, X.; Yang, W.; Weng, T. C.; Liu, Z. Hard X-rays in–Soft X-rays out: an operando piggyback view deep into a charging lithium ion battery with X-ray Raman spectroscopy. J. Electron Spectrosc. Relat. Phenom. 2015, 200, 257-263. https://doi.org/10.1016/j.elspec.2015.03.005
Braun, A. Just for us? J. Synchrotron Radiat. 2015, 22 (5), 1327-1328. https://doi.org/10.1107/S1600577515013818
Braun, A.; Toth, R.; Lagzi, I. Künstliche Intelligenz aus dem Chemiereaktor. Nachr. Chem. 2015, 63 (4), 445-446. https://doi.org/10.1002/nadc.201590132
Braun, A. Protonen auf die Sprünge helfen. Keramische Protonenleiter als Festelektrolyte für Mikro-BZ. Hzwei, Magazin für Wasserstoff und Brennstoffzellen, 2015, pp 40-41.
Chan, C. K.; Tüysüz, H.; Braun, A.; Ranjan, C.; La Mantia, F.; Miller, B. K.; Zhang, L.; Crozier, P. A.; Haber, J. A.; Gregoire, J. M.; et al. Advanced and in situ analytical methods for solar fuel materials. In Solar energy for fuels; Topics in Current Chemistry, Vol. 371; Springer, 2015; pp 253-324. https://doi.org/10.1007/128_2015_650
Chen, Y.; Orlovskaya, N.; Payzant, E. A.; Graule, T.; Kuebler, J. A search for temperature induced time-dependent structural transitions in 10 mol%Sc2O3–1 mol%CeO2–ZrO2 and 8 mol%Y2O3–ZrO2 electrolyte ceramics. J. Eur. Ceram. Soc. 2015, 35 (3), 951-958. https://doi.org/10.1016/j.jeurceramsoc.2014.08.030
Chen, Q.; Braun, A. Elucidating the biography of a proton in a proton conductor with neutrons and X-rays. Swiss Neutron News, 2015, pp 14-22. https://sgn.web.psi.ch/sgn/snn.html
Dalcanale, F.; Grossenbacher, J.; Blugan, G.; Gullo, M. R.; Brugger, J.; Tevaearai, H.; Graule, T.; Kuebler, J. CNT and PDCs: a fruitful association? Study of a polycarbosilane–MWCNT composite. J. Eur. Ceram. Soc. 2015, 35 (8), 2215-2224. https://doi.org/10.1016/j.jeurceramsoc.2015.02.016
Durif, C.; Frömder, C.; Affolter, C.; Lippmann, W.; Graule, T. Aquacasting—a new shaping concept for water based reactive tape casting. J. Eur. Ceram. Soc. 2015, 35 (13), 3633-3640. https://doi.org/10.1016/j.jeurceramsoc.2015.04.029
Faccio, G.; Gajda-Schrantz, K.; Ihssen, J.; Boudoire, F.; Hu, Y.; Mun, B. S.; Bora, D. K.; Thöny-Meyer, L.; Braun, A. Charge transfer between photosynthetic proteins and hematite in bio-hybrid photoelectrodes for solar water splitting cells. Nano Converg. 2015, 2, 9 (11 pp.). https://doi.org/10.1186/s40580-014-0040-4
Fleischhauer, F.; Terner, M.; Bermejo, R.; Danzer, R.; Mai, A.; Graule, T.; Kuebler, J. Fracture toughness and strength distribution at room temperature of zirconia tapes used for electrolyte supported solid oxide fuel cells. J. Power Sources 2015, 275, 217-226. https://doi.org/10.1016/j.jpowsour.2014.10.083
Fleischhauer, F.; Bermejo, R.; Danzer, R.; Mai, A.; Graule, T.; Kuebler, J. High temperature mechanical properties of zirconia tapes used for electrolyte supported solid oxide fuel cells. J. Power Sources 2015, 273, 237-243. https://doi.org/10.1016/j.jpowsour.2014.09.068
Fleischhauer, F.; Bermejo, R.; Danzer, R.; Mai, A.; Graule, T.; Kuebler, J. Strength of an electrolyte supported solid oxide fuel cell. J. Power Sources 2015, 297, 158-167. https://doi.org/10.1016/j.jpowsour.2015.07.075
Fu, F.; Feurer, T.; Jäger, T.; Avancini, E.; Bissig, B.; Yoon, S.; Buecheler, S.; Tiwari, A. N. Low-temperature-processed efficient semi-transparent planar perovskite solar cells for bifacial and tandem applications. Nat. Commun. 2015, 6, 8932 (21 pp.). https://doi.org/10.1038/ncomms9932
Galea, L.; Alexeev, D.; Bohner, M.; Doebelin, N.; Studart, A. R.; Aneziris, C. G.; Graule, T. Textured and hierarchically structured calcium phosphate ceramic blocks through hydrothermal treatment. Biomaterials 2015, 67 (33), 93-103. https://doi.org/10.1016/j.biomaterials.2015.07.026
Gorjan, L.; Blugan, G.; Graule, T.; Kuebler, J. Effectiveness of wick-debinding inside powder bed for ceramic laminates made by tape casting. Powder Technol. 2015, 273, 197-202. https://doi.org/10.1016/j.powtec.2014.12.049
Gorjan, L.; Blugan, G.; Boretius, M.; De La Pierre, S.; Ferraris, M.; Casalegno, V.; Rizzo, S.; Graule, T.; Kuebler, J. Fracture behavior of soldered Al2O3 ceramic to A356 aluminum alloy and resistance of the joint to low temperature exposure. Mater. Des. 2015, 88, 889-896. https://doi.org/10.1016/j.matdes.2015.09.067
Grossenbacher, J.; Gullo, M. R.; Dalcanale, F.; Blugan, G.; Kuebler, J.; Lecaudé, S.; Tevaearai Stahel, H.; Brugger, J. Cytotoxicity evaluation of polymer-derived ceramics for pacemaker electrode applications. J. Biomed. Mater. Res. A 2015, 103A (11), 3625-3632. https://doi.org/10.1002/jbm.a.35477
Grossenbacher, J.; Gullo, M. R.; Bakumov, V.; Blugan, G.; Kuebler, J.; Brugger, J. On the micrometre precise mould filling of liquid polymer derived ceramic precursor for 300-µm-thick high aspect ratio ceramic MEMS. Ceram. Int. 2015, 41 (1), 623-629. https://doi.org/10.1016/j.ceramint.2014.08.112
Kampolis, A.; Liu, Y.; Ferri, D.; Clemens, F.; Schildhauer, T.; Kröcher, O. Effect of support composition on the mechanical and catalytic properties of nickel catalysts for syngas methanation. In 23rd European biomass conference and exhibition. Setting the course for a biobased economy. Proceedings of the international conference held in Vienna, Austria, presented at the 23rd European biomass conference and exhibition, Vienna, June 1-4, 2015; Obernberger, I., Baxter, D., Grassi, A., Helm, P., Eds.; European biomass conference and exhibition proceedings; ETA-Florence Renewable Energies: Florence, 2015; pp 1003-1007. https://doi.org/10.5071/23rdEUBCE2015-3CO.15.4
Kastyl, J.; Chlup, Z.; Clemens, F.; Trunec, M. Ceramic core–shell composites with modified mechanical properties prepared by thermoplastic co-extrusion. J. Eur. Ceram. Soc. 2015, 35 (10), 2873-2881. https://doi.org/10.1016/j.jeurceramsoc.2015.04.012
Klimkevicius, V.; Graule, T.; Makuska, R. Effect of structure of cationic comb copolymers on their adsorption and stabilization of titania nanoparticles. Langmuir 2015, 31 (7), 2074-2083. https://doi.org/10.1021/la504213t
Kovács, G.; Fodor, S.; Vulpoi, A.; Schrantz, K.; Dombi, A.; Hernádi, K.; Danciu, V.; Pap, Z.; Baia, L. Polyhedral Pt vs. spherical Pt nanoparticles on commercial titanias: is shape tailoring a guarantee of achieving high activity? J. Catal. 2015, 325, 156-167. https://doi.org/10.1016/j.jcat.2015.02.008
Kulka, A.; Świerczek, K.; Walczak, K.; Braun, A.; Molenda, J. Correlation between transport properties and lithium extraction/insertion mechanism in Fe-site substituted phosphoolivine. Solid State Ionics 2015, 288, 184-192. https://doi.org/10.1016/j.ssi.2016.01.034
Kulka, A.; Braun, A.; Huang, T. W.; Wolska, A.; Klepka, M. T.; Szewczyk, A.; Baster, D.; Zając, W.; Świerczek, K.; Molenda, J. Evidence for Al doping in lithium sublattice of LiFePO4. Solid State Ionics 2015, 270, 33-38. https://doi.org/10.1016/j.ssi.2014.12.004
Liu, Y.; Kirchesch, P.; Graule, T.; Liersch, A.; Clemens, F. Nanoparticle prepared mechanically stable hierarchically porous silica granulates and their application as oxygen carrier supports for chemical looping combustion. J. Mater. Chem. A 2015, 3 (22), 11863-11873. https://doi.org/10.1039/C5TA01842K
Lovass, P.; Branicki, M.; Tóth, R.; Braun, A.; Suzuno, K.; Ueyama, D.; Lagzi, I. Maze solving using temperature-induced Marangoni flow. RSC Adv. 2015, 5 (60), 48563-48568. https://doi.org/10.1039/C5RA08207B
Lusiola, T.; Hussain, A.; Kim, M. H.; Graule, T.; Clemens, F. Ferroelectric KNNT fibers by thermoplastic extrusion process: microstructure and electromechanical characterization. Actuators 2015, 4 (2), 99-113. https://doi.org/10.3390/act4020099
Lyson-Sypien, B.; Radecka, M.; Rekas, K.; Swierczek, K.; Michalow-Mauke, K.; Graule, T.; Zakrzewska, K. Grain-size-dependent gas-sensing properties of TiO2 nanomaterials. Sens. Actuators B 2015, 211, 67-76. https://doi.org/10.1016/j.snb.2015.01.050
Michalow-Mauke, K. A.; Lu, Y.; Kowalski, K.; Graule, T.; Nachtegaal, M.; Kröcher, O.; Ferri, D. Flame-made WO3/CeOx-TiO2 catalysts for selective catalytic reduction of NOx by NH3. ACS Catal. 2015, 5 (10), 5657-5672. https://doi.org/10.1021/acscatal.5b01580
Michalow-Mauke, K. A.; Lu, Y.; Ferri, D.; Graule, T.; Kowalski, K.; Elsener, M.; Kröcher, O. WO3/CeO2/TiO2 catalysts for selective catalytic reduction of NOx by NH3: effect of the synthesis method. Chimia 2015, 69 (4), 220-224. https://doi.org/10.2533/chimia.2015.220
Michálek, M.; Blugan, G.; Graule, T.; Kuebler, J. Comparison of aqueous and non-aqueous tape casting of fully stabilized ZrO2 suspensions. Powder Technol. 2015, 274, 276-283. https://doi.org/10.1016/j.powtec.2015.01.036
Mohammadi, M.; Alizadeh, P.; Clemens, F. J. Synthesis of CaCu3Ti4O12 nanofibers by electrospinning. Ceram. Int. 2015, 41 (10), 13417-13424. https://doi.org/10.1016/j.ceramint.2015.07.130
Molenda, J.; Baster, D.; Milewska, A.; Świerczek, K.; Bora, D. K.; Braun, A.; Tobola, J. Electronic origin of difference in discharge curve between LixCoO2 and NaxCoO2 cathodes. Solid State Ionics 2015, 271, 15-27. https://doi.org/10.1016/j.ssi.2014.09.032
Németh, Z.; Horváth, E.; Magrez, A.; Réti, B.; Berki, P.; Forró, L.; Hernádi, K. Preparation of titania covered multi-walled carbon nanotube thin films. Mater. Des. 2015, 86, 198-203. https://doi.org/10.1016/j.matdes.2015.07.048
Pasquarelli, R. M.; Lee, H. S.; Kubrin, R.; Zierold, R.; Petrov, A. Y.; Nielsch, K.; Schneider, G. A.; Eich, M.; Janssen, R. Enhanced structural and phase stability of titania inverse opals. J. Eur. Ceram. Soc. 2015, 35 (11), 3103-3109. https://doi.org/10.1016/j.jeurceramsoc.2015.04.041
Ramachandran, D. K.; Søgaard, M.; Clemens, F.; Gurauskis, J.; Kaiser, A. Fabrication and performance of a tubular ceria based oxygen transport membrane on a low cost MgO support. Sep. Purif. Technol. 2015, 147 (1), 422-430. https://doi.org/10.1016/j.seppur.2015.02.037
Ramachandrana, D. K.; Kwok, K.; Søgaard, M.; Clemens, F.; Glasscock, A. J.; Kaiser, A. The role of sacrificial fugitives in thermoplastic extrusion feedstocks on properties of MgO supports for oxygen transport membranes. J. Eur. Ceram. Soc. 2015, 35 (5), 1527-1537. https://doi.org/10.1016/j.jeurceramsoc.2014.11.014
Regonini, D.; Clemens, F. J. Anodized TiO2 Nanotubes: effect of anodizing time on film length, morphology and photoelectrochemical properties. Mater. Lett. 2015, 142, 97-101. https://doi.org/10.1016/j.matlet.2014.11.145
Regonini, D.; Schmidt, A.; Aneziris, C. G.; Graule, T.; Clemens, F. J. Impact of the Anodizing Potential on the Electron Transport Properties of Nb-doped TiO2 Nanotubes. Electrochim. Acta 2015, 169, 210-218. https://doi.org/10.1016/j.electacta.2015.04.070
Regonini, D.; Groff, A.; Sorarù, G. D.; Clemens, F. J. Photoelectrochemical study of anodized TiO2 Nanotubes prepared using low and high H2O contents. Electrochim. Acta 2015, 186, 101-111. https://doi.org/10.1016/j.electacta.2015.10.162
Salehi, M.; Pfaff, E. M.; Kaletsch, A.; Graule, T.; Clemens, F.; Grobéty, B. Manufacturing of tubular dead-end membranes by continuous thermoplastic extrusion. Int. J. Appl. Ceram. Technol. 2015, 12 (S2), E13-E18. https://doi.org/10.1111/ijac.12190
Schabikowski, M.; Tomaszewska, J.; Kata, D.; Graule, T. Rotary jet-spinning of hematite fibers. Text. Res. J. 2015, 85 (3), 316-324. https://doi.org/10.1177/0040517514542969
Schneider, K.; Zajac, D.; Sikora, M.; Kapusta, C.; Michalow-Mauke, K.; Graule, T.; Rekas, M. XAS study of TiO2-based nanomaterials. Radiat. Phys. Chem. 2015, 112, 195-198. https://doi.org/10.1016/j.radphyschem.2015.03.010
Singh, S.; Liu, P.; Singh, A.; Coughlan, C.; Wang, J.; Lusi, M.; Ryan, K. M. Colloidal Cu2ZnSn(SSe)4 (CZTSSe) nanocrystals: shape and crystal phase control to form dots, arrows, ellipsoids, and rods. Chem. Mater. 2015, 27 (13), 4742-4748. https://doi.org/10.1021/acs.chemmater.5b01399
Tsekouras, G.; Boudoire, F.; Pal, B.; Vondráček, M.; Prince, K. C.; Sarma, D. D.; Braun, A. Electronic structure origin of conductivity and oxygen reduction activity changes in low-level Cr-substituted (La,Sr)MnO3. J. Chem. Phys. 2015, 143 (11), 114705 (7 pp.). https://doi.org/10.1063/1.4931033
Walliser, R. M.; Boudoire, F.; Orosz, E.; Tóth, R.; Braun, A.; Constable, E. C.; Rácz, Z.; Lagzi, I. Growth of nanoparticles and microparticles by controlled reaction-diffusion processes. Langmuir 2015, 31 (5), 1828-1834. https://doi.org/10.1021/la504123k
Wiecinska, P.; Graule, T.; Bachonko, M. Organic additives in gel-tape casting of ceramic powders – a novel approach to the problem of elasticity and cracking of thin tapes. J. Eur. Ceram. Soc. 2015, 35 (14), 3949-3957. https://doi.org/10.1016/j.jeurceramsoc.2015.05.028
Xie, Z.; Lugovy, M.; Orlovskaya, N.; Graule, T.; Kuebler, J.; Mueller, M.; Gao, H.; Radovic, M.; Cullen, D. A. Hexagonal OsB2: sintering, microstructure and mechanical properties. J. Alloys Compd. 2015, 634, 168-178. https://doi.org/10.1016/j.jallcom.2015.01.291
Adamaki, V.; Clemens, F.; Ragulis, P.; Pennock, S. R.; Taylor, J.; Bowen, C. R. Manufacturing and characterization of Magnéli phase conductive fibres. J. Mater. Chem. A 2014, 2 (22), 8328-8333. https://doi.org/10.1039/C4TA00685B
Adamaki, V.; Clemens, F.; Taylor, J.; Mays, T. J.; Bowen, C. R. Re-oxidation mechanism and kinetics of fine scale Ti-Magnéli phases in fibre form using thermo-gravimetric analysis. J. Mater. Sci. 2014, 49 (21), 7597-7603. https://doi.org/10.1007/s10853-014-8468-9
Allen, A. J.; Ilavsky, J.; Jemian, P. R.; Braun, A. Evolution of electrochemical interfaces in solid oxide fuel cells (SOFC): a Ni and Zr resonant anomalous ultra-small-angle X-ray scattering study with elemental and spatial resolution across the cell assembly. RSC Adv. 2014, 4 (9), 4676-4690. https://doi.org/10.1039/C3RA46886K
Arany, E.; Láng, J.; Somogyvári, D.; Láng, O.; Alapi, T.; Ilisz, I.; Gajda-Schrantz, K.; Dombi, A.; Kőhidai, L.; Hernádi, K. Vacuum ultraviolet photolysis of diclofenac and the effects of its treated aqueous solutions on the proliferation and migratory responses of Tetrahymena pyriformis. Sci. Total Environ. 2014, 468-469, 996-1006. https://doi.org/10.1016/j.scitotenv.2013.09.019
Blugan, G.; Hadad, M.; Graule, T.; Kuebler, J. Si3N4–TiN–SiC three particle phase composites for wear applications. Ceram. Int. 2014, 40 (1), 1439-1446. https://doi.org/10.1016/j.ceramint.2013.07.027
Bora, D. K.; Braun, A. Solution processed transparent nanoparticulate ZnO thin film electrode for photoelectrochemical water oxidation. RSC Adv. 2014, 4 (45), 23562-23570. https://doi.org/10.1039/C4RA00993B
Bortolani, F.; del Campo, A.; Fernandez, J. F.; Clemens, F.; Rubio-Marcos, F. High strain in (K,Na)NbO3-based lead-free piezoelectric fibers. Chem. Mater. 2014, 26 (12), 3838-3848. https://doi.org/10.1021/cm501538x
Boudoire, F.; Toth, R.; Heier, J.; Braun, A.; Constable, E. C. Hematite nanostructuring using electrohydrodynamic lithography. Appl. Surf. Sci. 2014, 305, 62-66. https://doi.org/10.1016/j.apsusc.2014.02.161
Boudoire, F.; Toth, R.; Heier, J.; Braun, A.; Constable, E. C. Photonic light trapping in self-organized all-oxide microspheroids impacts photoelectrochemical water splitting. Energy Environ. Sci. 2014, 7 (8), 2680-2688. https://doi.org/10.1039/C4EE00380B
Braun, A.; Embs, J. P.; Remhof, A. 2013 ESS science symposium: neutrons for future energy strategies. Neutron News 2014, 25 (1), 6-7. https://doi.org/10.1080/10448632.2014.870430
Braun, A.; Boudoire, F. Photoelektroden für solaren Wasserstoff. Tricks und Kniffe von der Natur abgeschaut. Hzwei, Magazin für Wasserstoff und Brennstoffzellen, 2014, pp 14-15.
Cruz, R. T.; Bragança, S. R.; Bergmann, C. P.; Graule, T.; Clemens, F. Preparation of Ba0.5Sr0.5Co0.8Fe0.2O3−δ (BSCF) feedstocks with different thermoplastic binders and their use in the production of thin tubular membranes by extrusion. Ceram. Int. 2014, 40 (5), 7531-7538. https://doi.org/10.1016/j.ceramint.2013.12.014
Culha, U.; Wani, U.; Nurzaman, S. G.; Clemens, F.; Iida, F. Motion pattern discrimination for soft robots with morphologically flexible sensors. In 2014 IEEE/RSJ international conference on intelligent robots and systems, presented at the 2014 IEEE/RSJ international conference on intelligent robots and systems (IROS 2014), Chicago, IL, USA, September 14-18, 2014; IEEE international workshop on intelligent robots and systems (IROS); IEEE: sine loco, 2014; pp 567-571. https://doi.org/10.1109/IROS.2014.6942616
Culha, U.; Nurzaman, S. G.; Clemens, F.; Iida, F. SVAS3: strain vector aided sensorization of soft structures. Sensors 2014, 14 (7), 12748-12770. https://doi.org/10.3390/s140712748
Dalcanale, F.; Grossenbacher, J.; Blugan, G.; Gullo, M. R.; Lauria, A.; Brugger, J.; Tevaearai, H.; Graule, T.; Niederberger, M.; Kuebler, J. Influence of carbon enrichment on electrical conductivity and processing of polycarbosilane derived ceramic for MEMS applications. J. Eur. Ceram. Soc. 2014, 34 (15), 3559-3570. https://doi.org/10.1016/j.jeurceramsoc.2014.06.002
Fleischhauer, F.; Tiefenauer, A.; Graule, T.; Danzer, R.; Mai, A.; Kuebler, J. Failure analysis of electrolyte-supported solid oxide fuel cells. J. Power Sources 2014, 258, 382-390. https://doi.org/10.1016/j.jpowsour.2014.02.009
Galea, L.; Bohner, M.; Thuering, J.; Doebelin, N.; Ring, T. A.; Aneziris, C. G.; Graule, T. Growth kinetics of hexagonal sub-micrometric β-tricalcium phosphate particles in ethylene glycol. Acta Biomater. 2014, 10 (9), 3922-3930. https://doi.org/10.1016/j.actbio.2014.02.044
Graça, S.; Trabadelo, V.; Neels, A.; Kuebler, J.; Le Nader, V.; Gamez, G.; Döbeli, M.; Wasmer, K. Influence of mosaicity on the fracture behavior of sapphire. Acta Mater. 2014, 67, 67-80. https://doi.org/10.1016/j.actamat.2013.12.004
Hu, Y.; Yella, A.; Guldin, S.; Schreier, M.; Stellacci, F.; Grätzel, M.; Stefik, M. High-surface-area porous platinum electrodes for enhanced charge transfer. Adv. Energy Mater. 2014, 4 (14), 1400510 (8 pp.). https://doi.org/10.1002/aenm.201400510
Ihssen, J.; Braun, A.; Faccio, G.; Gajda-Schrantz, K.; Thöny-Meyer, L. Light harvesting proteins for solar fuel generation in bioengineered photoelectrochemical cells. Curr. Protein Pept. Sci. 2014, 15 (4), 374-384. https://doi.org/10.2174/1389203715666140327105530
Illés, E.; Szabó, E.; Takács, E.; Wojnárovits, L.; Dombi, A.; Gajda-Schrantz, K. Ketoprofen removal by O3 and O3/UV processes: Kinetics, transformation products and ecotoxicity. Sci. Total Environ. 2014, 472, 178-184. https://doi.org/10.1016/j.scitotenv.2013.10.119
Kazakevičius, E.; Tsekouras, G.; Michalow-Mauke, K. A.; Kazlauskas, S.; Graule, T. Electronic conductivity enhancement of (La,Sr)TiO3 with Nb-doping on B-site. Fuel Cells 2014, 14 (6), 954-960. https://doi.org/10.1002/fuce.201400015
Koenig, C. F. J.; Nachtegaal, M.; Seemann, M.; Clemens, F.; van Garderen, N.; Biollaz, S. M. A.; Schildhauer, T. J. Mechanistic studies of chemical looping desulfurization of Mn-based oxides using in situ X-ray absorption spectroscopy. Appl. Energy 2014, 113, 1895-1901. https://doi.org/10.1016/j.apenergy.2013.04.075
Kothanda Ramachandran, D. Experimental extrusion of tubular multilayer materials for oxygen transport membranes. Doctoral dissertation, Department of DTU Energy Conversion and Storage, Risø campus, Roskilde, Denmark, 2014, 177 p.
Kozielski, L.; Buixaderas, E.; Clemens, F. Rhombohedral PLZT piezoelectric microfibers: a combined Raman and X-ray diffraction study. Phase Transit. 2014, 87 (10-11), 982-991. https://doi.org/10.1080/01411594.2014.953511
Kuebler, J.; Janczak-Rusch, J. Aktivlöten von Si3N4-TiN-Keramik und Stahl partikelverstärkten Ag-Cu Lotwerkstoffen. In Technische keramische Werkstoffe; Kriegesmann, J., Ed.; HvB Verlag: Köln, 2014; p (30 pp.).
Liu, Y.; Scharf, D.; Graule, T.; Clemens, F. J. Granulation processing parameters on the mechanical properties of diatomite-based porous granulates. Powder Technol. 2014, 263, 159-167. https://doi.org/10.1016/j.powtec.2014.04.094
Lu, Y.; Michalow, K. A.; Matam, S. K.; Winkler, A.; Maegli, A. E.; Yoon, S.; Heel, A.; Weidenkaff, A.; Ferri, D. Methane abatement under stoichiometric conditions on perovskite-supported palladium catalysts prepared by flame spray synthesis. Appl. Catal. B 2014, 144, 631-643. https://doi.org/10.1016/j.apcatb.2013.08.001
Lugovy, M.; Aman, A.; Chen, Y.; Orlovskaya, N.; Kuebler, J.; Graule, T.; Reece, M. J.; Ma, D.; Stoica, A. D.; An, K. In-situ neutron diffraction of LaCoO3 perovskite under uniaxial compression. II. Elastic properties. J. Appl. Phys. 2014, 116 (1), 013504 (9 pp.). https://doi.org/10.1063/1.4884336
Lugovy, M.; Orlovskaya, N.; Neubert, M.; Aneziris, C. G.; Graule, T.; Kuebler, J. Time dependent mechanical properties of ZrB2-SiC ceramic composites: room temperature fatigue parameters. Sci. Adv. Mater. 2014, 6 (4), 844-852. https://doi.org/10.1166/sam.2014.1792
Lusiola, T.; Scharf, D.; Graule, T.; Clemens, F. Low shear compounding process for thermoplastic fabrication of ferroelectric lead-free fibres. J. Eur. Ceram. Soc. 2014, 34 (10), 2265-2274. https://doi.org/10.1016/j.jeurceramsoc.2014.02.036
Melnykowycz, M.; Koll, B.; Scharf, D.; Clemens, F. Comparison of piezoresistive monofilament polymer sensors. Sensors 2014, 14 (1), 1278-1294. https://doi.org/10.3390/s140101278
Milewska, A.; Świerczek, K.; Tobola, J.; Boudoire, F.; Hu, Y.; Bora, D. K.; Mun, B. S.; Braun, A.; Molenda, J. The nature of the nonmetal–metal transition in LixCoO2 oxide. Solid State Ionics 2014, 263, 110-118. https://doi.org/10.1016/j.ssi.2014.05.011
Orlovskaya, N.; Lugovy, M.; Slyunyayev, V.; Kuebler, J. Control of thermal residual stresses. In Encyclopedia of thermal stresses; Hetnarski, R., Ed.; Vol. C; Springer: Berlin, Deutschland, 2014; pp 727-733. https://doi.org/10.1007/978-94-007-2739-7
Ramachandran, D. K.; Clemens, F.; Glasscock, A. J.; Søgaard, M.; Kaiser, A. Tailoring the microstructure of porous MgO supports for asymmetric oxygen separation membranes: optimization of thermoplastic feedstock systems. Ceram. Int. 2014, 40 (7), 10465-10473. https://doi.org/10.1016/j.ceramint.2014.03.017
Regonini, D.; Alves, A. K.; Berutti, F. A.; Clemens, F. Effect of aging time and film thickness on the photoelectrochemical properties of TiO2 sol-gel photoanodes. Int. J. Photoenergy 2014, 2014, 472539 (10 pp.). https://doi.org/10.1155/2014/472539
Schlenther, E.; Özcoban, H.; Jelitto, H.; Faller, M.; Schneider, G. A.; Graule, T.; Aneziris, C. G.; Kuebler, J. Fracture toughness and corrosion behaviour of infiltrated Al2O3|P – steel composites. Mater. Sci. Eng. A 2014, 590, 132-139. https://doi.org/10.1016/j.msea.2013.10.007
Suzuno, K.; Ueyama, D.; Branicki, M.; Tóth, R.; Braun, A.; Lagzi, I. Maze solving using fatty acid chemistry. Langmuir 2014, 30 (31), 9251-9255. https://doi.org/10.1021/la5018467
Szlachetko, J.; Michalow-Mauke, K.; Nachtegaal, M.; Sá, J. Determination of conduction and valence band electronic structure of anatase and rutile TiO2. J. Chem. Sci. 2014, 126 (2), 511-515. https://doi.org/10.1007/s12039-014-0584-1
Tsekouras, G.; Braun, A. Conductivity and oxygen reduction activity changes in lanthanum strontium manganite upon low-level chromium substitution. Solid State Ionics 2014, 266, 19-24. https://doi.org/10.1016/j.ssi.2014.08.006
Valet, S.; Weisse, B.; Kuebler, J.; Zimmermann, M.; Affolter, C.; Terrasi, G. P. Are asymmetric metal markings on the cone surface of ceramic femoral heads an indication of entrapped debris? Biomed. Eng. Online 2014, 13 (1), 38 (22 pp.). https://doi.org/10.1186/1475-925X-13-38
Wiecinska, P.; Graule, T.; Szafran, M. L-ascorbic acid as a new activator in fabrication of ceramics by techniques using in situ polymerization. J. Eur. Ceram. Soc. 2014, 34 (6), 1581-1589. https://doi.org/10.1016/j.jeurceramsoc.2013.12.013
de Hazan, Y.; Wilkens-Heinecke, J.; Graule, T. Modeling the effect of molecular architecture of comb polymers on the behavior of Al2O3 dispersions using charge/composition factors (CCF). Colloid Polym. Sci. 2014, 292 (7), 1701-1710. https://doi.org/10.1007/s00396-014-3232-x
van Garderen, N.; Clemens, F. J.; Graule, T. Development of copper impregnated porous granulates for chemical-looping combustion. Fuel 2014, 119, 323-327. https://doi.org/10.1016/j.fuel.2013.11.063
van Garderen, N.; Otal, E. H.; Aneziris, C. G.; Graule, T.; Clemens, F. J. Influence of porous substrate on copper based oxygen carrier efficiency for chemical-looping combustion. Microporous Mesoporous Mater. 2014, 190, 362-370. https://doi.org/10.1016/j.micromeso.2014.02.017
Arany, E.; Szabó, R. K.; Apáti, L.; Alapi, T.; Ilisz, I.; Mazellier, P.; Dombi, A.; Gajda-Schrantz, K. Degradation of naproxen by UV, VUV photolysis and their combination. J. Hazard. Mater. 2013, 262, 151-157. https://doi.org/10.1016/j.jhazmat.2013.08.003
Beni, A.; Braun, A.; Huthwelker, T.; Van Bokhoven, J. Exploratory workshop on soft X-rays and electrochemical energy storage and converters. Synchrotron Radiation News, 2013, pp 36-38. https://doi.org/10.1080/08940886.2013.832590
Bora, D. K.; Braun, A.; Constable, E. C. "In rust we trust". Hematite - the prospective inorganic backbone for artificial photosynthesis. Energy Environ. Sci. 2013, 6 (2), 407-425. https://doi.org/10.1039/C2EE23668K
Bora, D. K.; Hu, Y.; Thiess, S.; Erat, S.; Feng, X.; Mukherjee, S.; Fortunato, G.; Gaillard, N.; Toth, R.; Gajda-Schrantz, K.; et al. Between photocatalysis and photosynthesis: synchrotron spectroscopy methods on molecules and materials for solar hydrogen generation. J. Electron Spectrosc. Relat. Phenom. 2013, 190 (art A), 93-105. https://doi.org/10.1016/j.elspec.2012.11.009
Bora, D. K.; Braun, A.; Erni, R.; Müller, U.; Döbeli, M.; Constable, E. C. Hematite–NiO/α-Ni(OH)2 heterostructure photoanode with high electrocatalytic current density and charge storage capacity. Phys. Chem. Chem. Phys. 2013, 15 (30), 12648-12659. https://doi.org/10.1039/c3cp52179f
Chen, Y.; Orlovskaya, N.; Graule, T.; Kuebler, J. Microstructure and mechanical properties of Ni/10 mol% Sc2O3–1 mol% CeO2–ZrO2 cermet anode for solid oxide fuel cells. J. Eur. Ceram. Soc. 2013, 33 (3), 557-564. https://doi.org/10.1016/j.jeurceramsoc.2012.10.003
Chen, Q.; El Gabaly, F.; Aksoy Akgul, F.; Liu, Z.; Mun, B. S.; Yamaguchi, S.; Braun, A. Observation of oxygen vacancy filling under water vapor in ceramic proton conductors in situ with ambient pressure XPS. Chem. Mater. 2013, 25 (23), 4690-4696. https://doi.org/10.1021/cm401977p
Chen, Q.; Banyte, J.; Zhang, X.; Braun, A. Proton diffusivity in spark plasma Sintered BaCe0.8Y0.2O3 - δ : in-situ combination of quasi-elastic neutron scattering and impedance spectroscopy. Solid State Ionics 2013, 252, 2-6. https://doi.org/10.1016/j.ssi.2013.05.009
Chen, Y.; Aman, A.; Lugovy, M.; Orlovskaya, N.; Wang, S.; Huang, X.; Graule, T.; Kuebler, J. Residual stress and biaxial strength in Sc2O3–CeO2–ZrO2/Y2O3–ZrO2 layered electrolytes. Fuel Cells 2013, 13 (6), 1068-1075. https://doi.org/10.1002/fuce.201300015
Clemens, F.; Koll, B.; Graule, T.; Watras, T.; Binkowski, M.; Mattmann, C.; Silveira, I. Development of piezoresistive fiber sensors, based on carbon black filled thermoplastic elastomer compounds, for textile application. In Smart and interactive textiles, presented at the 4th international conference smart materials structures systems, Montecatini Terme, Italy, June 10-14, 2012; Vincenzini, P., Carfagna, C., Eds.; Advances in science and technology; Trans Tech Publications: Durnten-Zurich, 2013; Vol. 80, pp 7-13. https://doi.org/10.4028/www.scientific.net/AST.80.7
Dittmann, R.; Wintermantel, E.; Graule, T. Sintering of nano-sized titania particles and the effect of chlorine impurities. J. Eur. Ceram. Soc. 2013, 33 (15-16), 3257-3264. https://doi.org/10.1016/j.jeurceramsoc.2013.05.028
Dzidek, B.; Kozielski, L.; Adamczyk, M.; Pilch, M.; Clemens, F. Technology of PLZT ceramics microfibers for multiferroics composites. Phase Transit. 2013, 86 (7), 695-702. https://doi.org/10.1080/01411594.2012.729145
Flak, D.; Braun, A.; Rękas, M. Correlation of electronic structure and transport properties of FSS-prepared Ti-Substituted Fe2O3 nanoparticles for gas sensing. In Reactivity of solids; Przybylski, K., Ed.; Ceramika/ceramics, Vol. 115; Polish Ceramic Society: Kraków, 2013; pp 325-335. https://bpp.agh.edu.pl/autor/dziubaniuk-malgorzata-06501
Flak, D.; Braun, A.; Vollmer, A.; Rekas, M. Effect of the titania substitution on the electronic structure and transport properties of FSS-made Fe2O3 nanoparticles for hydrogen sensing. Sens. Actuators B 2013, 187, 347-355. https://doi.org/10.1016/j.snb.2012.12.038
Flak, D. K. New metal oxide nanoparticles for gas sensors. Doctoral dissertation, 2013, 159 p.
Flak, D.; Braun, A.; Mun, B. S.; Park, J. B.; Parlinska-Wojtan, M.; Graule, T.; Rekas, M. Spectroscopic assessment of the role of hydrogen in surface defects, in the electronic structure and transport properties of TiO2, ZnO and SnO2 nanoparticles. Phys. Chem. Chem. Phys. 2013, 15 (5), 1417-1430. https://doi.org/10.1039/C2CP42601C
Gaillard, N.; Chang, Y.; DeAngelis, A.; Higgins, S.; Braun, A. A nanocomposite photoelectrode made of 2.2 eV band gap copper tungstate (CuWO4) and multi-wall carbon nanotubes for solar-assisted water splitting. Int. J. Hydrog. Energy 2013, 38 (8), 3166-3176. https://doi.org/10.1016/j.ijhydene.2012.12.104
Gaiselmann, G.; Neumann, M.; Holzer, L.; Hocker, T.; Prestat, M. R.; Schmidt, V. Stochastic 3D modeling of La0.6Sr0.4CoO3−δ cathodes based on structural segmentation of FIB–SEM images. Comput. Mater. Sci 2013, 67, 48-62. https://doi.org/10.1016/j.commatsci.2012.08.030
Gajda-Schrantz, K.; Arany, E.; Illés, E.; Szabó, E.; Pap, Z.; Takács, E.; Wojnárovits, L. Advanced oxidation processes for ibuprofen removal and ecotoxicological risk assessment of degradation intermediates. In Ibuprofen. Clinical pharmacology, medical uses and adverse effects; Carter, W. C., Brown, B. R., Eds.; Pharmacology - research, safety testing and regulation; Nova Science Publishers, Inc.: New York, 2013; pp 159-232.
Gajda-Schrantz, K.; Tymen, S.; Boudoire, F.; Toth, R.; Bora, D. K.; Calvet, W.; Grätzel, M.; Constable, E. C.; Braun, A. Formation of an electron hole doped film in the α-Fe2O3 photoanode upon electrochemical oxidation. Phys. Chem. Chem. Phys. 2013, 15 (5), 1443-1451. https://doi.org/10.1039/c2cp42597a
Galea, L.; Bohner, M.; Thuering, J.; Doebelin, N.; Aneziris, C. G.; Graule, T. Control of the size, shape and composition of highly uniform, non-agglomerated, sub-micrometer β-tricalcium phosphate and dicalcium phosphate platelets. Biomaterials 2013, 34 (27), 6388-6401. https://doi.org/10.1016/j.biomaterials.2013.05.026
Holzer, L.; Wiedenmann, D.; Münch, D.; Keller, L.; Prestat, M.; Gasser, P.; Robertson, I.; Grobéty, B. The influence of constrictivity on the effective transport properties of porous layers in electrolysis and fuel cells. J. Mater. Sci. 2013, 48 (7), 2934-2952. https://doi.org/10.1007/s10853-012-6968-z
Hu, Y.; Bora, D. K.; Boudoire, F.; Häussler, F.; Graetzel, M.; Constable, E. C.; Braun, A. A dip coating process for large area silicon-doped high performance hematite photoanodes. J. Renew. Sustain. Energy 2013, 5 (4), 043109 (9 pp.). https://doi.org/10.1063/1.4812831
Illés, E.; Takács, E.; Dombi, A.; Gajda-Schrantz, K.; Rácz, G.; Gonter, K.; Wojnárovits, L. Hydroxyl radical induced degradation of ibuprofen. Sci. Total Environ. 2013, 447, 286-292. https://doi.org/10.1016/j.scitotenv.2013.01.007
Kozielski, L.; Erhart, J.; Clemens, F. J. Light-intensity-induced characterization of elastic constants and d33 piezoelectric coefficient of PLZT single fiber based transducers. Sensors 2013, 13 (2), 2419-2429. https://doi.org/10.3390/s130202419
Lugovy, M.; Orlovskaya, N.; Neubert, M.; Aneziris, C. G.; Graule, T.; Kuebler, J. Room temperature fatigue of ZrB2–SiC ceramic composites. Ceram. Int. 2013, 39 (8), 9187-9194. https://doi.org/10.1016/j.ceramint.2013.05.020
Michalow, K. A.; Otal, E. H.; Burnat, D.; Fortunato, G.; Emerich, H.; Ferri, D.; Heel, A.; Graule, T. Flame-made visible light active TiO2:Cr photocatalysts: correlation between structural, optical and photocatalytic properties. Catal. Today 2013, 209, 47-53. https://doi.org/10.1016/j.cattod.2012.10.007
Michen, B.; Fritsch, J.; Aneziris, C.; Graule, T. Improved virus removal in ceramic depth filters modified with MgO. Environ. Sci. Technol. 2013, 47 (3), 1526-1533. https://doi.org/10.1021/es303685a
Michálková, M.; Lenčéš, Z.; Michálek, M.; Kocher, P.; Kuebler, J.; Šajgalík, P. Improvement of electrical conductivity of silicon nitride/carbon nano-fibers composite using magnesium silicon nitride and ytterbium oxide as sintering additives. J. Eur. Ceram. Soc. 2013, 33 (13-14), 2429-2434. https://doi.org/10.1016/j.jeurceramsoc.2013.04.037
Nurk, G.; Huthwelker, T.; Braun, A.; Ludwig, C.; Lust, E.; Struis, R. P. W. J. Redox dynamics of sulphur with Ni/GDC anode during SOFC operation at mid- and low-range temperatures: an operando S K-edge XANES study. J. Power Sources 2013, 240, 448-457. https://doi.org/10.1016/j.jpowsour.2013.03.187
Orlovskaya, N.; Stadelmann, R.; Lugovy, M.; Subbotin, V.; Subhash, G.; Neubert, M.; Aneziris, C. G.; Graule, T.; Kuebler, J. Mechanical properties of ZrB2–SiC ceramic composites: room temperature instantaneous behaviour. Adv. Appl. Ceram. 2013, 112 (1), 9-16. https://doi.org/10.1179/1743676112Y.0000000042
Raoof, H.; Mielczarek, P.; Michalow, K.; Rekas, M.; Silberring, J. Synthesis of metabolites of paracetamol and cocaine via photooxidation on TiO2 catalyzed by UV light. J. Photochem. Photobiol. B 2013, 118, 49-57. https://doi.org/10.1016/j.jphotobiol.2012.10.013
Regonini, D.; Bowen, C. R.; Jaroenworaluck, A.; Stevens, R. A review of growth mechanism, structure and crystallinity of anodized TiO2 nanotubes. Mater. Sci. Eng. R 2013, 74 (12), 377-406. https://doi.org/10.1016/j.mser.2013.10.001
Regonini, D.; Teloeken, A. C.; Alves, A. K.; Berutti, F. A.; Gajda-Schrantz, K.; Bergmann, C. P.; Graule, T.; Clemens, F. Electrospun TiO2 fiber composite photoelectrodes for water splitting. ACS Appl. Mater. Interfaces 2013, 5 (22), 11747-11755. https://doi.org/10.1021/am403437q
Salehi, M.; Pfaff, E. M.; Morkis Junior, R.; Bergmann, C. P.; Diethelm, S.; Neururer, C.; Graule, T.; Grobéty, B.; Clemens, F. J. Ba0.5Sr0.5Co0.8Fe0.2O3−δ (BSCF) feedstock development and optimization for thermoplastic forming of thin planar and tubular oxygen separation membranes. J. Membr. Sci. 2013, 443, 237-245. https://doi.org/10.1016/j.memsci.2013.04.051
Salehi, M.; Clemens, F.; Otal, E. H.; Ferri, D.; Graule, T.; Grobéty, B. Debinding mechanisms in thermoplastic processing of a Ba0.5Sr0.5Co0.8Fe0.2O3−δ- stearic acid–polystyrene mixture. ChemSusChem 2013, 6 (2), 336-344. https://doi.org/10.1002/cssc.201200540
Scherrer, S. S.; Cattani-Lorente, M.; Yoon, S.; Karvonen, L.; Pokrant, S.; Rothbrust, F.; Kuebler, J. Post-hot isostatic pressing: a healing treatment for process related defects and laboratory grinding damage of dental zirconia? Dent. Mater. 2013, 29 (2), e180-e190. https://doi.org/10.1016/j.dental.2013.04.014
Stefan, E.; Tsekouras, G.; Irvine, J. T. S. Development and performance of MnFeCrO4-based electrodes for solid oxide fuel cells. Adv. Energy Mater. 2013, 3 (11), 1454-1462. https://doi.org/10.1002/aenm.201300361
Thapper, A.; Styring, S.; Saracco, G.; Rutherford, A. W.; Robert, B.; Magnuson, A.; Lubitz, W.; Llobet, A.; Kurz, P.; Holzwarth, A.; et al. Artificial photosynthesis for solar fuels – an evolving research field within AMPEA, a joint programme of the european energy research alliance. Green 2013, 3 (1), 43-57. https://doi.org/10.1515/green-2013-0007
Wang, H.; Young, A. T.; Guo, J.; Cramer, S. P.; Friedrich, S.; Braun, A.; Gu, W. Soft X-ray absorption spectroscopy and resonant inelastic X-ray scattering spectroscopy below 100 eV: probing first-row transition-metal M-edges in chemical complexes. J. Synchrotron Radiat. 2013, 20 (4), 614-619. https://doi.org/10.1107/S0909049513003142
Wiedenmann, D.; Keller, L.; Holzer, L.; Stojadinović, J.; Münch, B.; Suarez, L.; Fumey, B.; Hagendorfer, H.; Brönnimann, R.; Modregger, P.; et al. Three-dimensional pore structure and ion conductivity of porous ceramic diaphragms. AICHE J. 2013, 59 (5), 1446-1457. https://doi.org/10.1002/aic.14094
van Garderen, N.; Graule, T.; Aneziris, C. G.; Clemens, F. J. Comparison methods for microstructure analysis on highly porous extrudates based on diatomite filter aids. Microporous Mesoporous Mater. 2013, 171, 215-222. https://doi.org/10.1016/j.micromeso.2012.12.022
Abakevičienė, B.; Žalga, A.; Tautkus, S.; Pilipavičius, J.; Navickas, E.; Kareiva, A.; Tamulevičius, S. Synthesis of YSZ thin films by the novel aqueous sol-gel citrate-precursor method. Solid State Ionics 2012, 225, 73-76. https://doi.org/10.1016/j.ssi.2012.06.004
Arany, E.; Oppenländer, T.; Gajda-Schrantz, K.; Dombi, A. Influence of H2O2 formed in situ on the photodegradation of ibuprofen and ketoprofen. Curr. Phys. Chem. 2012, 2 (3), 286-293. https://doi.org/10.2174/1877946811202030286
Bakumov, V.; Blugan, G.; Roos, S.; Graule, T.; Fakhfouri, V.; Grossenbacher, J.; Gullo, M.; Kiefer, T.; Brugger, J.; Parlinska, M.; et al. Mechanical and tribological properties of polymer-derived Si/C/N sub-millimetre thick miniaturized components fabricated by direct casting. J. Eur. Ceram. Soc. 2012, 32 (8), 1759-1767. https://doi.org/10.1016/j.jeurceramsoc.2012.01.007
Bora, D. K.; Braun, A.; Erat, S.; Safonova, O.; Graule, T.; Constable, E. C. Evolution of structural properties of iron oxide nano particles during temperature treatment from 250 °C–900 °C: X-ray diffraction and Fe K-shell pre-edge X-ray absorption study. Curr. Appl. Phys. 2012, 12 (3), 817-825. https://doi.org/10.1016/j.cap.2011.11.013
Bora, D. K.; Rozhkova, E. A.; Schrantz, K.; Wyss, P. P.; Braun, A.; Graule, T.; Constable, E. C. Functionalization of nanostructured hematite thin-film electrodes with the light-harvesting membrane protein C-phycocyanin yields an enhanced photocurrent. Adv. Funct. Mater. 2012, 22 (3), 490-502. https://doi.org/10.1002/adfm.201101830
Bora, D. K. Hematite and its hybrid nanostructures for photoelectrochemical water splitting: how do properties affect functionality? Doctoral dissertation, Universität Basel, Switzerland, 2012, 230 p. https://doi.org/10.5451/unibas-005771744
Braun, A.; Sivula, K.; Bora, D. K.; Zhu, J.; Zhang, L.; Grätzel, M.; Guo, J.; Constable, E. C. Direct observation of two electron holes in a hematite photoanode during photoelectrochemical water splitting. J. Phys. Chem. C 2012, 116 (32), 16870-16875. https://doi.org/10.1021/jp304254k
Braun, A.; Erat, S.; Bayraktar, D.; Harvey, A.; Graule, T. Electronic origin of conductivity changes and isothermal expansion of Ta- and Ti-substituted La1/2Sr1/2Fe-oxide in oxidative and reducing atmosphere. Chem. Mater. 2012, 24 (8), 1529-1535. https://doi.org/10.1021/cm300423m
Braun, A.; Chen, Q.; Flak, D.; Fortunato, G.; Gajda-Schrantz, K.; Grätzel, M.; Graule, T.; Guo, J.; Huang, T. W.; Liu, Z.; et al. Iron resonant photoemission spectroscopy on anodized hematite points to electron hole doping during anodization. ChemPhysChem 2012, 13 (12), 2937-2944. https://doi.org/10.1002/cphc.201200074
Braun, A.; Akgul, F. A.; Chen, Q.; Erat, S.; Huang, T. W.; Jabeen, N.; Liu, Z.; Mun, B. S.; Mao, S. S.; Zhang, X. Observation of substrate orientation-dependent oxygen defect filling in thin WO3−δ/TiO2 pulsed laser-deposited films with in situ XPS at high oxygen pressure and temperature. Chem. Mater. 2012, 24 (17), 3473-3480. https://doi.org/10.1021/cm301829y
Braun, A. Solarer Wasserstoff und künstliche Photosynthese. Swiss Engineering, 2012, pp 20-21.
Braun, A. Zwischen Photovoltaik und Photosynthese. Solarer Wasserstoff aus Rost und Algen. Hzwei, Magazin für Wasserstoff und Brennstoffzellen, 2012, pp 20-21.
Burnat, D.; Heel, A.; Holzer, L.; Otal, E.; Kata, D.; Graule, T. On the chemical interaction of nanoscale lanthanum doped strontium titanates with common scandium and yttrium stabilized electrolyte materials. Int. J. Hydrog. Energy 2012, 37 (23), 18326-18341. https://doi.org/10.1016/j.ijhydene.2012.09.022
Burnat, D.; Heel, A.; Holzer, L.; Kata, D.; Lis, J.; Graule, T. Synthesis and performance of A-site deficient lanthanum-doped strontium titanate by nanoparticle based spray pyrolysis. J. Power Sources 2012, 201, 26-36. https://doi.org/10.1016/j.jpowsour.2011.10.088
Chang, H. H.; Luo, J. Y.; Wu, C. T.; Hsu, F. C.; Huang, T. W.; Wu, P. M.; Wu, M. K.; Wang, M. J. Weak localization in FeSe1−xTex superconducting thin films. Supercond. Sci. Technol. 2012, 25 (3), 035004 (7 pp.). https://doi.org/10.1088/0953-2048/25/3/035004
Chen, S. Y.; Tsai, C. H.; Huang, M. Z.; Yan, D. C.; Huang, T. W.; Gloter, A.; Chen, C. L.; Lin, H. J.; Chen, C. T.; Dong, C. L. Concentration dependence of oxygen vacancy on the magnetism of CeO2 nanoparticles. J. Phys. Chem. C 2012, 116 (15), 8707-8713. https://doi.org/10.1021/jp2065634
Chen, Q. Effects of pressure on the proton-phonon coupling in metal oxides with perovskite structure. Doctoral dissertation, ETH Zürich, Switzerland, 2012, 123 p.
Chen, Q.; Holdsworth, S.; Embs, J.; Pomjakushin, V.; Frick, B.; Braun, A. High-temperature high pressure cell for neutron-scattering studies. High Press. Res. 2012, 32 (4), 471-481. https://doi.org/10.1080/08957959.2012.725729
Chen, Y.; Orlovskaya, N.; Klimov, M.; Huang, X.; Cullen, D.; Graule, T.; Kuebler, J. Layered YSZ/SCSZ/YSZ electrolytes for intermediate temperature SOFC part I: design and manufacturing. Fuel Cells 2012, 12 (5), 722-731. https://doi.org/10.1002/fuce.201200008
Elias, J.; Gizowska, M.; Brodard, P.; Widmer, R.; deHazan, Y.; Graule, T.; Michler, J.; Philippe, L. Electrodeposition of gold thin films with controlled morphologies and their applications in electrocatalysis and SERS. Nanotechnology 2012, 23 (25), 255705 (7 pp.). https://doi.org/10.1088/0957-4484/23/25/255705
Flak, D.; Braun, A.; Michalow, K. A.; Wyrwa, J.; Parlinska-Wojtan, M.; Graule, T.; Rekas, M. Differences in electrophysical and gas sensing properties of flame spray synthesized Fe2O3 (γ-Fe2O3 and α-Fe2O3). J. Nanosci. Nanotechnol. 2012, 12 (8), 6401-6411. https://doi.org/10.1166/jnn.2012.6429
Flak, D.; Braun, A.; Mun, B. S.; Döbeli, M.; Graule, T.; Rekas, M. Electronic structure and surface properties of non-stoichiometric Fe2O3-δ (α and γ) and its application in gas sensing. In 26th European conference on solid-state transducers, EUROSENSOR 2012, presented at the 26th European conference on solid-state transducers, EUROSENSOR 2012, Kraków, Poland, September 9-12, 2012; Procedia engineering; Elsevier, 2012; Vol. 47, pp 257-260. https://doi.org/10.1016/j.proeng.2012.09.132
Fortunato, G.; Tenniche, A.; Gottardo, L.; Reifler, F. A.; Michalow, K.; Hufenus, R. Development of PET fibers for photocatalytic degradation of organic molecules. In The Fiber Society 2012 spring conference. Fiber research for tomorrow's applications, presented at the The Fiber Society 2012 spring conference, St. Gallen, Switzerland, May 23-25, 2012; Hufenus, R., Rossi, R., Eds.; Empa; The Fiber Society: sine loco, 2012.
Gaillard, N.; Chang, Y.; Braun, A.; DeAngelis, A. Copper tungstate (CuWO4)–based materials for photoelectrochemical hydrogen production. In Symposium U – materials for catalysis in energy, presented at the 2012 MRS spring meeting, San Francisco, California, April 9–13, 2012; Jiang, Den, Kung, H. H., Jin, R., Rioux, R. M., Eds.; Materials research society symposium proceedings; Materials Research Society: Warrendale, Pennsylvania, 2012; Vol. 1446, pp 19-24. https://doi.org/10.1557/opl.2012.952
Graule, T.; Ulrich, A.; Wegmann, M. Influence of platinum foil impurities on sintering of functional ceramics. J. Eur. Ceram. Soc. 2012, 32 (13), 3567-3573. https://doi.org/10.1016/j.jeurceramsoc.2012.05.018
Gruber, I.; Zinovik, I.; Holzer, L.; Flisch, A.; Poulikakos, L. D. A computational study of the effect of structural anisotropy of porous asphalt on hydraulic conductivity. Constr. Build. Mater. 2012, 36, 66-77. https://doi.org/10.1016/j.conbuildmat.2012.04.094
Holzer, L.; Cantoni, M. Review of FIB tomography. In Nanofabrication using focused ion and electron beams. Principles and applications; Utke, I., Moshkalev, S., Russell, P., Eds.; Oxford series on nanomanufacturing; Oxford University Press: Oxford, 2012; pp 410-435. https://global.oup.com/academic/product/nanofabrication-using-focused-ion-and-electron-beams-9780199734214?q=978-0-19-973421-4&lang=en&cc=ch#
Illés, E.; Takács, E.; Dombi, A.; Gajda-Schrantz, K.; Gonter, K.; Wojnárovits, L. Radiation induced degradation of ketoprofen in dilute aqueous solution. Radiat. Phys. Chem. 2012, 81 (9), 1479-1483. https://doi.org/10.1016/j.radphyschem.2011.11.038
Iwanschitz, B.; Holzer, L.; Mai, A.; Schütze, M. Nickel agglomeration in solid oxide fuel cells: the influence of temperature. Solid State Ionics 2012, 211, 69-73. https://doi.org/10.1016/j.ssi.2012.01.015
Kocbach Bølling, A.; Totlandsdal, A. I.; Sallsten, G.; Braun, A.; Westerholm, R.; Bergvall, C.; Boman, J.; Dahlman, H. J.; Sehlstedt, M.; Cassee, F.; et al. Wood smoke particles from different combustion phases induce similar pro-inflammatory effects in a co-culture of monocyte and pneumocyte cell lines. Part. Fibre Toxicol. 2012, 9, 45 (15 pp.). https://doi.org/10.1186/1743-8977-9-45
Lyson-Sypien, B.; Czapla, A.; Zakrzewska, K.; Swierczek, K.; Radecka, M.; Rekas, M.; Michalow, K.; Graule, T. Influence of grain size on gas sensing properties of Tio2 nanopowders. In 26th European conference on solid-state transducers, EUROSENSOR 2012, presented at the 26th European conference on solid-state transducers, EUROSENSOR 2012, Kraków, Poland, September 9-12, 2012; Walczak, R., Dziuban, J., Eds.; Procedia engineering; Elsevier: sine loco, 2012; Vol. 47, pp 1057-1060. https://doi.org/10.1016/j.proeng.2012.09.332
Lyson-Sypien, B.; Czapla, A.; Lubecka, M.; Gwizdz, P.; Schneider, K.; Zakrzewska, K.; Michalow, K.; Graule, T.; Reszka, A.; Rekas, M.; et al. Nanopowders of chromium doped TiO2 for gas sensors. Sens. Actuators B 2012, 175, 163-172. https://doi.org/10.1016/j.snb.2012.02.051
Michalow, K. A.; Flak, D.; Heel, A.; Parlinska-Wojtan, M.; Rekas, M.; Graule, T. Effect of Nb doping on structural, optical and photocatalytic properties of flame-made TiO2 nanopowder. Environ. Sci. Pollut. Res. 2012, 19 (9), 3696-3708. https://doi.org/10.1007/s11356-012-0953-6
Michalow, K. A.; Graule, T.; Heel, A.; Fortunato, G. Harnessing the sun. Flame spray processing yields TiO2 with high photocatalytic activity. Eur. Coat. J. 2012, 2012 (7-8), 30-35.
Michen, B.; Meder, F.; Rust, A.; Fritsch, J.; Aneziris, C.; Graule, T. Virus removal in ceramic depth filters based on diatomaceous earth. Environ. Sci. Technol. 2012, 46 (2), 1170-1177. https://doi.org/10.1021/es2030565
Najako, A.; Kuebler, J.; Faes, A.; Vogt, U. F.; Schindler, H. J.; Chiang, L. K.; Modena, S.; Van herle, J.; Hocker, T. Compilation of mechanical properties for the structural analysis of solid oxide fuel cell stacks. Constitutive materials of anode-supported cells. Ceram. Int. 2012, 38 (5), 3907-3927. https://doi.org/10.1016/j.ceramint.2012.01.043
Navickas, E.; Braun, A.; Knoknerytė, J.; Chen, Q.; Abakevičienė, B.; Kubel, F.; Tamulevičius, S.; Fleig, J. Barium cerate substituted with yttria as proton conducting electrolyte. Presented at the 4th international conference on radiation interaction with material and its use in technologies, Kaunas, Lithuania, May 14–17, 2012; pp 107-110.
R. Ismael, M.; Clemens, F.; Wyss, P.; Graule, T.; Hoffmann, M. J. Processing and properties of co-extruded lead zirconate titanate fibers. J. Am. Ceram. Soc. 2012, 95 (1), 108-116. https://doi.org/10.1111/j.1551-2916.2011.04851.x
Raoof, H.; Michalow, K. A.; Silberring, J. Drug metabolism simulation using TiO2/UV system. In Biomolecular mass spectrometry. Tips from the bench; König, S., Ed.; Biochemistry research trends; Nova Science Publishers, Inc.: New York, 2012; pp 139-152.
Regonini, D.; Adamaki, V.; Bowen, C. R.; Pennock, S. R.; Taylor, J.; Dent, A. C. E. AC electrical properties of TiO2 and Magnéli phases, TinO2n − 1. Solid State Ionics 2012, 229, 38-44. https://doi.org/10.1016/j.ssi.2012.10.003
Salehi, M.; Clemens, F.; Graule, T.; Grobéty, B. Kinetic analysis of the polymer burnout in ceramic thermoplastic processing of the YSZ thin electrolyte structures using model free method. Appl. Energy 2012, 95, 147-155. https://doi.org/10.1016/j.apenergy.2012.02.025
Schlenther, E.; Aneziris, C. G.; Graule, T.; Kuebler, J. Influence of microstructural features on the impact toughness of infiltrated Al2O3|P-steel composites. Mater. Sci. Eng. A 2012, 556, 751-757. https://doi.org/10.1016/j.msea.2012.07.060
Schuler, J. A.; Wuillemin, Z.; Hessler-Wyser, A.; Comminges, C.; Yousfi Steiner, N.; Van herle, J. Cr-poisoning in (La,Sr)(Co,Fe)O3 cathodes after 10,000 h SOFC stack testing. J. Power Sources 2012, 211, 177-183. https://doi.org/10.1016/j.jpowsour.2012.03.045
Song, J. M.; Huang, B. R.; Liu, C. Y.; Lai, Y. S.; Chiu, Y. T.; Huang, T. W. Nanomechanical responses of intermetallic phase at the solder joint interface - crystal orientation and metallurgical effects. Mater. Sci. Eng. A 2012, 534, 53-59. https://doi.org/10.1016/j.msea.2011.11.037
Strehler, C.; Graule, T.; Kuebler, J.; Ehrle, B.; Weinreich, A.; Kaiser, B.; Aneziris, C. G. Lifetime and wear behavior of near net shaped Si3N4/SiC wood cutting tools. Int. J. Appl. Ceram. Technol. 2012, 9 (2), 280-290. https://doi.org/10.1111/j.1744-7402.2011.02690.x
Su, H. C.; Lee, C. H.; Lin, M. Z.; Huang, T. W. A comparison between X-ray reflectivity and atomic force microscopy on the characterization of a surface roughness. Chin. J. Phys. 2012, 50 (2), 291-300.
Szastak, K. Self organization and pattern formation of metal oxide thin films for photochemical applications. Master thesis, 2012.
Thankappan, A.; Hari, M.; Mathew, S.; Joseph, S. A.; Erni, R.; Bora, D.; Braun, A.; Nampoori, V. P. N. Synthesis of monocrystalline zinc oxide microrods by wet chemical method for light confinement applications. Physica E 2012, 44 (10), 2118-2123. https://doi.org/10.1016/j.physe.2012.06.026
Toth, R.; Heier, J.; Tisserant, J. N.; Enyedy, E. A.; Braun, A.; Graule, T. Self-organised microdots formed by dewetting in a highly volatile liquid. J. Colloid Interface Sci. 2012, 378 (1), 201-209. https://doi.org/10.1016/j.jcis.2012.04.011
Totlandsdal, A. I.; Herseth, J. I.; Kocbach Bølling, A.; Kubátová, A.; Braun, A.; Cochran, R. E.; Refsnes, M.; Øvrevik, J.; Låg, M. Differential effects of the particle core and organic extract of diesel exhaust particles. Toxicol. Lett. 2012, 208 (3), 262-268. https://doi.org/10.1016/j.toxlet.2011.10.025
Tymen, S. Synthesis and characterization of hematite thin film and proteins coating. Master thesis, 2012, 31 p.
Wilkens-Heinecke, J.; de Hazan, Y.; Populoh, S.; Aneziris, C. G.; Graule, T. Fabrication and characterisation of cellular alumina articles produced via radiation curable dispersions. J. Eur. Ceram. Soc. 2012, 32 (10), 2173-2185. https://doi.org/10.1016/j.jeurceramsoc.2012.02.014
de Hazan, Y.; Knies, F.; Burnat, D.; Graule, T.; Yamada-Pittini, Y.; Aneziris, C.; Kraak, M. Homogeneous functional Ni-P/ceramic nanocomposite coatings via stable dispersions in electroless nickel electrolytes. J. Colloid Interface Sci. 2012, 365 (1), 163-171. https://doi.org/10.1016/j.jcis.2011.09.032
de Hazan, Y. Porous ceramics, ceramic/polymer, and metal-doped ceramic/polymer nanocomposites via freeze casting of photo-curable colloidal fluids. J. Am. Ceram. Soc. 2012, 95 (1), 177-187. https://doi.org/10.1111/j.1551-2916.2011.04870.x
de Hazan, Y.; Thänert, M.; Trunec, M.; Misak, J. Robotic deposition of 3d nanocomposite and ceramic fiber architectures via UV curable colloidal inks. J. Eur. Ceram. Soc. 2012, 32 (6), 1187-1198. https://doi.org/10.1016/j.jeurceramsoc.2011.12.007
van Garderen, N.; Clemens, F. J.; Aneziris, C. G.; Graule, T. Improved γ-alumina support based pseudo-boehmite shaped by micro-extrusion process for oxygen carrier support application. Ceram. Int. 2012, 38 (7), 5481-5492. https://doi.org/10.1016/j.ceramint.2012.03.061
van Garderen, N.; Clemens, F. J.; Kaufmann, J.; Urbanek, M.; Binkowski, M.; Graule, T.; Aneziris, C. G. Pore analyses of highly porous diatomite and clay based materials for fluidized bed reactors. Microporous Mesoporous Mater. 2012, 151, 255-263. https://doi.org/10.1016/j.micromeso.2011.10.028
Šojić, D.; Despotović, V.; Orčić, D.; Szabó, E.; Arany, E.; Armaković, S.; Illés, E.; Gajda-Schrantz, K.; Dombi, A.; Alapi, T.; et al. Degradation of thiamethoxam and metoprolol by UV, O3 and UV/O3 hybrid processes: kinetics, degradation intermediates and toxicity. J. Hydrol. 2012, 472-473, 314-327. https://doi.org/10.1016/j.jhydrol.2012.09.038
Blugan, G.; Herrmann, T.; Graule, T.; Kuebler, J. Laser machining of silicon nitride based composite cantilever structures. Opt. Lasers Eng. 2011, 49 (9-10), 1095-1100. https://doi.org/10.1016/j.optlaseng.2011.05.017
Blugan, G.; Michalkova, M.; Hnatko, M.; Šajgalík, P.; Minghetti, T.; Schelle, C.; Graule, T.; Kuebler, J. Processing and properties of alumina-carbon nano fibre ceramic composites using standard ceramic technology. Ceram. Int. 2011, 37 (8), 3371-3379. https://doi.org/10.1016/j.ceramint.2011.05.139
Bora, D. K.; Braun, A.; Erat, S.; Ariffin, A. K.; Löhnert, R.; Sivula, K.; Töpfer, J.; Grätzel, M.; Manzke, R.; Graule, T.; et al. Evolution of an oxygen near-edge X-ray absorption fine structure transition in the upper hubbard band in α-Fe2O3 upon electrochemical oxidation. J. Phys. Chem. C 2011, 115 (13), 5619-5625. https://doi.org/10.1021/jp108230r
Bora, D. K.; Braun, A.; Erni, R.; Fortunato, G.; Graule, T.; Constable, E. C. Hydrothermal treatment of a hematite film leads to highly oriented faceted nanostructures with enhanced photocurrents. Chem. Mater. 2011, 23 (8), 2051-2061. https://doi.org/10.1021/cm102826n
Braun, A.; Erat, S.; Ariffin, A. K.; Manzke, R.; Wadati, H.; Graule, T.; Gauckler, L. J. High temperature oxygen near edge x-ray absorption fine structure valence band spectra and conductivity of LaFe3/4Ni1/4O3 from 300 to 773 K. Appl. Phys. Lett. 2011, 99 (20), 202112 (3 pp.). https://doi.org/10.1063/1.3662970
Braun, A.; Erat, S.; Zhang, X.; Chen, Q.; Huang, T. W.; Aksoy, F.; Löhnert, R.; Liu, Z.; Mao, S. S.; Graule, T. Surface and bulk oxygen vacancy defect states near the Fermi level in 125 nm WO3−δ/TiO2 (110) films: a resonant valence band photoemission spectroscopy study. J. Phys. Chem. C 2011, 115 (33), 16411-16417. https://doi.org/10.1021/jp202375h
Castillo, N. A study of synthesis & performance of flame-made semiconducting BiVO4 nanoparticles for the photocatalytic degradation of aqueous organic pollutants. Doctoral dissertation, EPF Lausanne, Switzerland, 2011, 148 p.
Chang, Y.; Braun, A.; Deangelis, A.; Kaneshiro, J.; Gaillard, N. Effect of thermal treatment on the crystallographic, surface energetics, and photoelectrochemical properties of reactively cosputtered copper tungstate for water splitting. J. Phys. Chem. C 2011, 115 (51), 25490-25495. https://doi.org/10.1021/jp207341v
Chang, H. H.; Luo, J. Y.; Wu, C. T.; Hsu, F. C.; Huang, T. W.; Wu, P. M.; Wu, M. K.; Wang, M. J. The vortex state of FeSe1―xTex superconducting thin films. Supercond. Sci. Technol. 2011, 24 (10), 105011 (5 pp.). https://doi.org/10.1088/0953-2048/24/10/105011
Chen, Q.; Huang, T. W.; Baldini, M.; Hushur, A.; Pomjakushin, V.; Clark, S.; Mao, W. L.; Manghnani, M. H.; Braun, A.; Graule, T. Effect of compressive strain on the Raman modes of the dry and hydrated BaCe0.8Y0.2O3 proton conductor. J. Phys. Chem. C 2011, 115 (48), 24021-24027. https://doi.org/10.1021/jp208525j
Chen, Q.; Braun, A.; Yoon, S.; Bagdassarov, N.; Graule, T. Effect of lattice volume and compressive strain on the conductivity of BaCeY-oxide ceramic proton conductors. J. Eur. Ceram. Soc. 2011, 31 (14), 2657-2661. https://doi.org/10.1016/j.jeurceramsoc.2011.02.014
Clemens, F.; Comyn, T.; Heiber, J.; Nobre, F.; Dent, A. C. E.; Bowen, C. R. Processing and electromechanical properties of lanthanum-doped Pb(Zr,Ti)O3 extruded piezoelectric fibres. J. Mater. Sci. 2011, 46 (13), 4517-4523. https://doi.org/10.1007/s10853-011-5345-7
Faes, A.; Wuillemin, Z.; Tanasini, P.; Accardo, N.; Modena, S.; Schindler, H. J.; Cantoni, M.; Lübbe, H.; Diethelm, S.; Hessler-Wyser, A.; et al. Design of experiment approach applied to reducing and oxidizing tolerance of anode supported solid oxide fuel cell part II: electrical, electrochemical and microstructural characterization of tape-cast cells. J. Power Sources 2011, 196 (21), 8909-8917. https://doi.org/10.1016/j.jpowsour.2010.11.146
Haas, O.; Ludwig, C.; Bergmann, U.; Singh, R. N.; Braun, A.; Graule, T. X-ray absorption investigation of the valence state and electronic structure of La1-x Cax CoO3-δ in comparison with La1-x Srx CoO3-δ and La1-x Srx FeO3-δ. J. Solid State Chem. 2011, 184 (12), 3163-3171. https://doi.org/10.1016/j.jssc.2011.09.027
Holzer, L.; Iwanschitz, B.; Hocker, T.; Münch, B.; Prestat, M.; Wiedenmann, D.; Vogt, U.; Holtappels, P.; Sfeir, J.; Mai, A.; et al. Microstructure degradation of cermet anodes for solid oxide fuel cells: quantification of nickel grain growth in dry and in humid atmospheres. J. Power Sources 2011, 196 (3), 1279-1294. https://doi.org/10.1016/j.jpowsour.2010.08.017
Holzer, L.; Münch, B.; Iwanschitz, B.; Cantoni, M.; Hocker, T.; Graule, T. Quantitative relationships between composition, particle size, triple phase boundary length and surface area in nickel-cermet anodes for Solid Oxide Fuel Cells. J. Power Sources 2011, 196 (17), 7076-7089. https://doi.org/10.1016/j.jpowsour.2010.08.006
Ismael, M. R.; Clemens, F.; Graule, T.; Hoffmann, M. J. Effects of different thermoplastic binders on the processability of feedstocks for ceramic co-extrusion process. Ceram. Int. 2011, 37 (8), 3173-3182. https://doi.org/10.1016/j.ceramint.2011.05.084
Jansohn, P.; Griffin, T.; Mantzaras, I.; Maréchal, F.; Clemens, F. Technologies for gas turbine power generation with CO2 mitigation. In 10th international conference on greenhouse gas control technologies, presented at the 10th international conference on greenhouse gas control technologies (GHGT-10), Amsterdam, Netherlands, 19-23 September 2010; Gale, J., Hendriks, C., Turkenberg, W., Eds.; Energy procedia; Elsevier, 2011; Vol. 4, pp 1901-1908. https://doi.org/10.1016/j.egypro.2011.02.069
Karageorgakis, N. I.; Heel, A.; Graule, T.; Gauckler, L. J. Flame spray deposition of nanocrystalline dense Ce0.8Gd0.2O2-δ thin films: deposition mechanism and microstructural characterization. Solid State Ionics 2011, 192 (1), 464-471. https://doi.org/10.1016/j.ssi.2010.04.030
Karageorgakis, N. I.; Heel, A.; Rupp, J. L. M.; Aguirre, M. H.; Graule, T.; Gauckler, L. J. Properties of flame sprayed Ce0.8Gd0.2O1.9-δ electrolyte thin films. Adv. Funct. Mater. 2011, 21 (3), 532-539. https://doi.org/10.1002/adfm.201001622
Keller, L. M.; Holzer, L.; Wepf, R.; Gasser, P. 3D geometry and topology of pore pathways in Opalinus clay: implications for mass transport. Appl. Clay Sci. 2011, 52 (1-2), 85-95. https://doi.org/10.1016/j.clay.2011.02.003
Keller, L. M.; Holzer, L.; Wepf, R.; Gasser, P.; Münch, B.; Marschall, P. On the application of focused ion beam nanotomography in characterizing the 3D pore space geometry of Opalinus clay. Phys. Chem. Earth 2011, 36 (17-18), 1539-1544. https://doi.org/10.1016/j.pce.2011.07.010
Keller, L. M.; Stipp, M. The single-slip hypothesis revisited: Crystal-preferred orientations of sheared quartz aggregates with increasing strain in nature and numerical simulation. J. Struct. Geol. 2011, 33 (10), 1491-1500. https://doi.org/10.1016/j.jsg.2011.07.008
Kuebler, J.; Blugan, G. Failure analysis of zirconia ceramic watch bracelet components. Eng. Fail. Anal. 2011, 18 (2), 625-632. https://doi.org/10.1016/j.engfailanal.2010.09.028
Kylberg, W.; Sonar, P.; Heier, J.; Tisserant, J. N.; Müller, C.; Nüesch, F.; Chen, Z. K.; Dodabalapur, A.; Yoon, S.; Hany, R. Synthesis, thin-film morphology, and comparative study of bulk and bilayer heterojunction organic photovoltaic devices using soluble diketopyrrolopyrrole molecules. Energy Environ. Sci. 2011, 4 (9), 3617-3624. https://doi.org/10.1039/C1EE01544C
Lugovy, M.; Slyunyayev, V.; Yarmolenko, S.; Sankar, J.; Graule, T.; Kuebler, J.; Nicholson, D.; Orlovskaya, N. A further insight into spherical indentation: ring crack formation in a brittle La0.8Sr0.2Ga0.8Mg0.2O3 perovskite. Acta Mater. 2011, 59 (11), 4425-4436. https://doi.org/10.1016/j.actamat.2011.03.066
Lugovy, M.; Slyunyayev, V.; Subbotin, V.; Liang, F.; Gou, J.; Orlovskaya, N.; Graule, T.; Kuebler, J. Mechanical behavior and failure mechanisms of boron carbide based three-layered laminates with weak interfaces. Ceram. Int. 2011, 37 (7), 2255-2261. https://doi.org/10.1016/j.ceramint.2011.03.065
Lyson, B.; Gwizdz, P.; Czapla, A.; Lubecka, M.; Zakrzewska, K.; Biernacka, K.; Radecka, M.; Michalow-Mauke, K.; Graule, T.; Balogh, A. G.; et al. TiO2: Cr nanopowders for hydrogen sensing. In Eurosensors XXV, presented at the Eurosensors XXV, Athens, Greece, September 4-7, 2011; Kaltsas, G., Tsamis, C., Eds.; Procedia engineering; Elsevier, 2011; Vol. 25, pp 749-752. https://doi.org/10.1016/j.proeng.2011.12.184
Michen, B.; Diatta, A.; Fritsch, J.; Aneziris, C.; Graule, T. Removal of colloidal particles in ceramic depth filters based on diatomaceous earth. Sep. Purif. Technol. 2011, 81 (1), 77-87. https://doi.org/10.1016/j.seppur.2011.07.006
Nurk, G.; Holtappels, P.; Figi, R.; Wochele, J.; Wellinger, M.; Braun, A.; Graule, T. A versatile salt evaporation reactor system for SOFC operando studies on anode contamination and degradation with impedance spectroscopy. J. Power Sources 2011, 196 (6), 3134-3140. https://doi.org/10.1016/j.jpowsour.2010.11.023
Orlovskaya, N.; Lugovy, M.; Slyunyayev, V.; Subbotin, V.; Liang, F.; Gou, J.; Kuebler, J.; Graule, T. Boron carbide/boron carbide-carbon nanofibers laminates with weak interfaces. In Boron rich solids. Sensors, ultra high temperature ceramics, thermoelectrics, armor, presented at the NATO advanced research workshop on boron rich solids: sensors for biological and chemical detection, ultra high temperature ceramics, thermoelectrics, armor, Orlando, Florida, USA, December 14-18, 2009; Orlovskaya, N., Lugovy, M., Eds.; NATO science for peace and security series B: physics and biophysics; Springer: Dordrecht, The Netherlands, 2011; pp 1-11. https://doi.org/10.1007/978-90-481-9818-4_1
Pittini-Yamada, Y.; Périgo, E. A.; Nakahara, S.; DeHazan, Y.; Eskandarpour, A.; Meyer, C.; Erni, M.; Pittini, R. Dynamic magnetic properties of electrically insulated iron cores. In Proceedings of the euro international powder metallurgy congress and exhibition, Euro PM 2011, presented at the European international powder metallurgy congress and exhibition, Euro PM 2011, Barcelona, October 9-12, 2011; European Powder Metallurgy Association (EPMA): Chantilly, 2011; p 5 pp.
Pittini-Yamada, Y.; Périgo, E. A.; de Hazan, Y.; Nakahara, S. Permeability of hybrid soft magnetic composites. Acta Mater. 2011, 59 (11), 4291-4302. https://doi.org/10.1016/j.actamat.2011.03.053
Pryds, N.; Clemens, F.; Menon, M.; Nielsen, P. H.; Brodersen, K.; Bjørk, R.; Bahl, C. R. H.; Engelbrecht, K.; Nielsen, K. K.; Smith, A. A monolithic perovskite structure for use as a magnetic regenerator. J. Am. Ceram. Soc. 2011, 94 (8), 2549-2555. https://doi.org/10.1111/j.1551-2916.2011.04398.x
Périgo, E. A.; Nakahara, S.; Pittini-Yamada, Y.; de Hazan, Y.; Graule, T. Magnetic properties of soft magnetic composites prepared with crystalline and amorphous powders. J. Magn. Magn. Mater. 2011, 323 (15), 1938-1944. https://doi.org/10.1016/j.jmmm.2011.02.025
Salehi, M.; Clemens, F.; Pfaff, E. M.; Diethelm, S.; Leach, C.; Graule, T.; Grobéty, B. A case study of the effect of grain size on the oxygen permeation flux of BSCF disk-shaped membrane fabricated by thermoplastic processing. J. Membr. Sci. 2011, 382 (1-2), 186-193. https://doi.org/10.1016/j.memsci.2011.08.007
Strehler, C. Development of near net shaped Si3N4/SiC composites with optimised grain boundary phase for industrial wood machining. Doctoral dissertation, Technische Universität Bergakademie Freiberg, Germany, 2011, 107 p.
Strehler, C.; Parlinska-Wojtan, M.; Blugan, G.; Speisser, B.; Ehrle, B.; Aneziris, C. G.; Graule, T.; Kuebler, J. Influence of intergranular phases on edge integrity of Si3N4/SiC wood cutting tools. J. Eur. Ceram. Soc. 2011, 31 (14), 2711-2719. https://doi.org/10.1016/j.jeurceramsoc.2011.01.021
Tinguely, J. C.; Solarska, R.; Braun, A.; Graule, T. Low-temperature roll-to-roll coating procedure of dye-sensitized solar cell photoelectrodes on flexible polymer-based substrates. Semicond. Sci. Technol. 2011, 26 (4), 045007 (6 pp.). https://doi.org/10.1088/0268-1242/26/4/045007
Toth, R.; Schabikowski, M.; Heier, J.; Braun, A.; Kata, D.; Graule, T. The effect of solvent and electric field on the size distribution of iron oxide microdots: exploitation of self-assembly strategies for photoelectrodes. J. Mater. Res. 2011, 26 (2), 254-261. https://doi.org/10.1557/jmr.2010.4
Wozniak, M.; de Hazan, Y.; Graule, T.; Kata, D. Rheology of UV curable colloidal silica dispersions for rapid prototyping applications. J. Eur. Ceram. Soc. 2011, 31 (13), 2221-2229. https://doi.org/10.1016/j.jeurceramsoc.2011.05.004
Woźniak, M. UV curable silica dispersions for rapid prototyping applications. Doctoral dissertation, AGH University of Science and Technology, Kraków, Poland, 2011, 154 p.
de Hazan, Y.; Märkl, V.; Heinecke, J.; Aneziris, C.; Graule, T. Functional ceramic and nanocomposite fibers, cellular articles and microspheres via radiation curable colloidal dispersions. J. Eur. Ceram. Soc. 2011, 31 (14), 2601-2611. https://doi.org/10.1016/j.jeurceramsoc.2010.12.006
van Garderen, N.; Clemens, F. J.; Mezzomo, M.; Bergmann, C. P.; Graule, T. Investigation of clay content and sintering temperature on attrition resistance of highly porous diatomite based material. Appl. Clay Sci. 2011, 52 (1-2), 115-121. https://doi.org/10.1016/j.clay.2011.02.008
Protons in solids, 2011 MRS spring meeting, San Francisco, CA, April 25-29, 2011; Braun, A., Gannon, P., Haile, S., Robinson, R., Eds.; Materials research society symposium proceedings, Vol. 1330; Curran: Red Hook, NY, 2011; 59 p.
Bahraini, M.; Schlenther, E.; Kriegesmann, J.; Graule, T.; Kuebler, J. Influence of atmosphere and carbon contamination on activated pressureless infiltration of alumina-steel composites. Composites A 2010, 41 (10), 1511-1515. https://doi.org/10.1016/j.compositesa.2010.06.013
Berutti, F. A.; Alves, A. K.; Clemens, F. J.; Graule, T.; Bergmann, C. P. Electrospinning and characterisation of ceria doped yttria fibres. Adv. Appl. Ceram. 2010, 109 (1), 62-64. https://doi.org/10.1179/174367509X12503626841712
Bluhm, H.; Guo, J.; Braun, A.; Heske, C. Soft X-ray spectroscopy in renewable energy generation and storage materials. Synchrotron Radiation News, 2010, pp 12-13. https://doi.org/10.1080/08940880903547272
Braun, A.; Wang, H.; Funk, T.; Seifert, S.; Cairns, E. J. Depth profile analysis of a cycled lithium ion manganese oxide battery electrode via the valence state of manganese, with soft X-ray emission spectroscopy. J. Power Sources 2010, 195 (22), 7644-7648. https://doi.org/10.1016/j.jpowsour.2010.05.053
Braun, A.; Seifert, S.; Ilavsky, J. Highly porous activated glassy carbon film sandwich structure for electrochemical energy storage in ultracapacitor applications: study of the porous film structure and gradient. J. Mater. Res. 2010, 25 (8), 1532-1540. https://doi.org/10.1557/JMR.2010.0197
Braun, A.; Augustynski, J.; Chandler, E. A.; Mao, S. S.; Miller, E. L.; Turner, J. A.; Ye, J. Introduction. J. Mater. Res. 2010, 25 (1), 1-2. https://doi.org/10.1557/JMR.2010.0038
Braun, A.; Akurati, K. K.; Fortunato, G.; Reifler, F. A.; Ritter, A.; Harvey, A. S.; Vital, A.; Graule, T. Nitrogen doping of TiO2 photocatalyst forms a second eg state in the oxygen 1s NEXAFS pre-edge. J. Phys. Chem. C 2010, 114 (1), 516-519. https://doi.org/10.1021/jp908875t
Burnat, D.; Ried, P.; Holtappels, P.; Heel, A.; Graule, T. J.; Kata, D. The rheology of stabilised lanthanum strontium cobaltite ferrite nanopowders in organic medium applicable as screen printed SOFC cathode layers. Fuel Cells 2010, 10 (1), 156-165. https://doi.org/10.1002/fuce.200900014
Castillo, N. C.; Heel, A.; Graule, T.; Pulgarin, C. Flame-assisted synthesis of nanoscale, amorphous and crystalline, spherical BiVO4 with visible-light photocatalytic activity. Appl. Catal. B 2010, 95 (3-4), 335-347. https://doi.org/10.1016/j.apcatb.2010.01.012
Castillo, N. C.; Ding, L.; Heel, A.; Graule, T.; Pulgarin, C. On the photocatalytic degradation of phenol and dichloroacetate by BiVO4: the need of a sacrificial electron acceptor. J. Photochem. Photobiol. A 2010, 216 (2-3), 221-227. https://doi.org/10.1016/j.jphotochem.2010.08.021
Chen, Q.; Braun, A.; Ovalle, A.; Savaniu, C. D.; Graule, T.; Bagdassarov, N. Hydrostatic pressure decreases the proton mobility in the hydrated BaZr0.9Y0.1O3 proton conductor. Appl. Phys. Lett. 2010, 97 (4), 041902 (3 pp.). https://doi.org/10.1063/1.3464162
Clemens, F. J.; Heiber, J.; Graule, T.; Piechowiak, M.; Kozielski, L.; Czekaj, D. Microstructural and electromechanical comparison of different piezoelectric PZT based single fibers and their 1-3 composites. In 2010 IEEE international symposium on the applications of ferroelectrics (ISAF), presented at the 2010 IEEE international symposium on the applications of ferroelectrics (ISAF), Edinburgh, UK, August 9-12, 2010; IEEE, 2010; p 5712231 (4 pp.). https://doi.org/10.1109/ISAF.2010.5712231
Dittmer, R.; Clemens, F.; Schoenecker, A.; Scheithauer, U.; Rojas-Ismael, M.; Graule, T. Microstructural analysis and mechanical properties of Pb(Zr,Ti)O3 fibers derived by different processing routes. J. Am. Ceram. Soc. 2010, 93 (8), 2403-2410. https://doi.org/10.1111/j.1551-2916.2010.03742.x
Erat, S.; Braun, A.; Piamonteze, C.; Liu, Z.; Ovalle, A.; Schindler, H.; Graule, T.; Gauckler, L. J. Entanglement of charge transfer, hole doping, exchange interaction, and octahedron tilting angle and their influence on the conductivity of La1―xSrxFe0.75Ni0.25O3―δ: a combination of x-ray spectroscopy and diffraction. J. Appl. Phys. 2010, 108 (12), 124906 (8 pp.). https://doi.org/10.1063/1.3517822
Erat, S.; Wadati, H.; Aksoy, F.; Liu, Z.; Graule, T.; Gauckler, L. J.; Braun, A. Iron-resonant valence band photoemission and oxygen near edge x-ray absorption fine structure study on La1―xSrxFe0.75Ni0.25O3―δ. Appl. Phys. Lett. 2010, 97 (12), 124101 (3 pp.). https://doi.org/10.1063/1.3484960
Erat, S. On the origin of enhanced conductivity in LaSrFe-oxide upon Ni doping: correlation of electronic structure and transport properties. Doctoral dissertation, ETH Zürich, Switzerland, 2010, 182 p. https://doi.org/10.3929/ethz-a-006226396
Heel, A.; Holtappels, P.; Hug, P.; Graule, T. Flame spray synthesis of nanoscale La0.6Sr0.4Co 0.2Fe0.8O3-δ and Ba0.5Sr0.5Co0.8Fe0.2O3-δ as cathode materials for intermediate temperature solid oxide fuel cells. Fuel Cells 2010, 10 (3), 419-432. https://doi.org/10.1002/fuce.200900093
Heel, A.; Holtappels, P.; Graule, T. On the synthesis and performance of flame-made nanoscale La0.6Sr0.4CoO3-δ and its influence on the application as an intermediate temperature solid oxide fuel cell cathode. J. Power Sources 2010, 195 (19), 6709-6718. https://doi.org/10.1016/j.jpowsour.2010.04.006
Holzer, L.; Münch, B.; Rizzi, M.; Wepf, R.; Marschall, P.; Graule, T. 3D-microstructure analysis of hydrated bentonite with cryo-stabilized pore water. Appl. Clay Sci. 2010, 47 (3-4), 330-342. https://doi.org/10.1016/j.clay.2009.11.045
Holzer, L.; Flatt, R. J.; Erdoğan, S. T.; Bullard, J. W.; Bullard, J. W.; Garboczi, E. J. Shape comparison between 0.4-2.0 and 20-60 μm cement particles. J. Am. Ceram. Soc. 2010, 93 (6), 1626-1633. https://doi.org/10.1111/j.1551-2916.2010.03654.x
Ismael Michen, M. Co-extrusion of piezoelectric ceramic fibres. Doctoral dissertation, KIT, 2010, 133 p. http://digbib.ubka.uni-karlsruhe.de/volltexte/1000021999
Karageorgakis, N. I.; Heel, A.; Bieberle-Hütter, A.; Rupp, J. L. M.; Graule, T.; Gauckler, L. J. Flame spray deposition of La0.6Sr0.4CoO3-δ thin films: microstructural characterization, electrochemical performance and degradation. J. Power Sources 2010, 195 (24), 8152-8161. https://doi.org/10.1016/j.jpowsour.2010.06.089
Karageorgakis, N. I. Nanocrystalline ceramic thin films for micro-solid oxide fuel cells prepared by flame spray deposition. Doctoral dissertation, ETH Zürich, Switzerland, 2010, 139 p. https://doi.org/10.3929/ethz-a-006128817
Katsapov, G. Y.; Braun, A. Deuterium tracer experiments prove the thiophenic hydrogen involvement during the initial step of thiophene hydrodesulfurization. Catal. Lett. 2010, 138 (3-4), 224-230. https://doi.org/10.1007/s10562-010-0400-6
Keller, L. M.; Götze, L. C.; Rybacki, E.; Dresen, G.; Abart, R. Enhancement of solid-state reaction rates by non-hydrostatic stress effects on polycrystalline diffusion kinetics. Am. Mineral. 2010, 95 (10), 1399-1407. https://doi.org/10.2138/am.2010.3372
Kozielski, L.; Buixaderas, E.; Clemens, F.; Bujakiewicz-Korońska, R. PZT Microfibre defect structure studied by Raman spectroscopy. J. Phys. D 2010, 43 (41), 415401 (6 pp.). https://doi.org/10.1088/0022-3727/43/41/415401
Kuebler, J.; Vogt, U. F.; Haberstock, D.; Sfeir, J.; Mai, A.; Hocker, T.; Roos, M.; Harnisch, U. Simulation and validation of thermo-mechanical stresses in planar SOFCs. Fuel Cells 2010, 10 (6), 1066-1073. https://doi.org/10.1002/fuce.201000040
Löhnert, R. Synthesis and characterisation of hematite nanoparticles and films for photoelectrochemical applications. Bachelor thesis, 2010, 54 p.
Metin, H.; Erat, S.; Durmuş, S.; Ari, M. Annealing effect on CdS/SnO2 films grown by chemical bath deposition. Appl. Surf. Sci. 2010, 256 (16), 5076-5081. https://doi.org/10.1016/j.apsusc.2010.03.063
Metin, H.; Ari, M.; Erat, S.; Durmuş, S.; Bozoklu, M.; Braun, A. The effect of annealing temperature on the structural, optical, and electrical properties of CdS films. J. Mater. Res. 2010, 25 (1), 189-196. https://doi.org/10.1557/JMR.2010.0025
Metin, H.; Erat, S.; Emen, F. M.; Kafadar, V.; Yazici, A. N.; Ari, M.; Kulcu, N. The thermoluminescence properties of CdS films under nitrogen atmosphere. J. Lumin. 2010, 130 (8), 1531-1538. https://doi.org/10.1016/j.jlumin.2010.03.025
Michen, B.; Graule, T. Isoelectric points of viruses. J. Appl. Microbiol. 2010, 109 (2), 388-397. https://doi.org/10.1111/j.1365-2672.2010.04663.x
Michen, B. Virus removal in ceramic depth filters: the electrostatic enhanced adsorption approach. Doctoral dissertation, Technische Universität Bergakademie Freiberg, Germany, 2010, 152 p.
Molberg, M.; Leterrier, Y.; Plummer, C. J. G.; Löwe, C.; Opris, D. M.; Clemens, F.; Månson, J. A. E. Elastomer actuators: systematic improvement in properties by use of composite materials. In Electroactive polymer actuators and devices (EAPAD) 2010, presented at the SPIE smart structures and materials + nondestructive evaluation and health monitoring, San Diego, CA, USA, March 7-11, 2010; Bar-Cohen, Y., Ed.; Proceedings of SPIE; SPIE: Bellingham, WA, USA, 2010; Vol. 7642, p 76420M (9 pp.). https://doi.org/10.1117/12.847493
Nakahara, S.; Périgo, E. A.; Pittini-Yamada, Y.; de Hazan, Y.; Graule, T. Electric insulation of a FeSiBC soft magnetic amorphous powder by a wet chemical method: identification of the oxide layer and its thickness control. Acta Mater. 2010, 58 (17), 5695-5703. https://doi.org/10.1016/j.actamat.2010.06.044
Orlovskaya, N.; Lukich, S.; Subhash, G.; Graule, T.; Kuebler, J. Mechanical properties of 10 mol% Sc2O3-1 mol% CeO2-89 mol% ZrO2 ceramics. J. Power Sources 2010, 195 (9), 2774-2781. https://doi.org/10.1016/j.jpowsour.2009.11.016
Pathak, S.; Kuebler, J.; Payzant, A.; Orlovskaya, N. Mechanical behavior and electrical conductivity of La1-xCaxCoO3 (x = 0, 0.2, 0.4, 0.55) perovskites. J. Power Sources 2010, 195 (11), 3612-3620. https://doi.org/10.1016/j.jpowsour.2009.11.134
Prestat, M.; Morandi, A.; Heel, A.; Holzer, L.; Holtappels, P.; Graule, T. J. Effect of graphite pore former on oxygen electrodes prepared with La0.6Sr0.4CoO3-δ nanoparticles. Electrochem. Commun. 2010, 12 (2), 292-295. https://doi.org/10.1016/j.elecom.2009.12.018
Radecka, M.; Jasiński, M.; Klich-Kafel, J.; Rękas, M.; Łysoń, B.; Czapla, A.; Lubecka, M.; Sokołowski, M.; Zakrzewska, K.; Heel, A.; et al. TiO2-based nanopowders for gas sensor. Mater. Ceram. 2010, 62 (4), 545-549.
Radecka, M.; Rekas, M.; Kusior, E.; Zakrzewska, K.; Heel, A.; Michalow, K. A.; Graule, T. TiO2-based nanopowders and thin films for photocatalytical applications. J. Nanosci. Nanotechnol. 2010, 10 (2), 1032-1042. https://doi.org/10.1166/jnn.2010.1865
Reifler, F. A.; Sánchez, F. A. L.; Clemens, F. J.; Varga, K.; Hufenus, R. Flexible ceramic-reinforced polyurethane composite coatings on synthetic fibres: process of continuous liquid film coating and its influence on the coating thickness. Compos. Sci. Technol. 2010, 70 (8), 1207-1213. https://doi.org/10.1016/j.compscitech.2010.03.008
Schabikowski, M. Synthesis and characteristion of self-organised haematite thin films for photonic applications. Master thesis, 2010, 106 p.
Solarska, R.; Heel, A.; Ropka, J.; Braun, A.; Holzer, L.; Ye, J.; Graule, T. Nanoscale calcium bismuth mixed oxide with enhanced photocatalytic performance under visible light. Appl. Catal. A 2010, 382 (2), 190-196. https://doi.org/10.1016/j.apcata.2010.04.043
Solarska, R.; Alexander, B. D.; Braun, A.; Jurczakowski, R.; Fortunato, G.; Stiefel, M.; Graule, T.; Augustynski, J. Tailoring the morphology of WO3 films with substitutional cation doping: effect on the photoelectrochemical properties. Electrochim. Acta 2010, 55 (26), 7780-7787. https://doi.org/10.1016/j.electacta.2009.12.016
Steinhausen, R.; Kern, S.; Pientschke, C.; Beige, H.; Clemens, F.; Heiber, J. A new measurement method of piezoelectric properties of single ceramic fibres. J. Eur. Ceram. Soc. 2010, 30 (2), 205-209. https://doi.org/10.1016/j.jeurceramsoc.2009.06.013
Strehler, C.; Blugan, G.; Ehrle, B.; Speisser, B.; Graule, T.; Kuebler, J. Influence of sintering and sintering additives on the mechanical and microstructural characteristics of Si3N4/SiC wood cutting tools. J. Eur. Ceram. Soc. 2010, 30 (10), 2109-2115. https://doi.org/10.1016/j.jeurceramsoc.2010.04.007
Vasić, S.; Grobéty, B.; Kuebler, J.; Graule, T.; Baumgartner, L. XRCT characterisation of Ti particles inside porous Al2O3. Mater. Charact. 2010, 61 (6), 653-660. https://doi.org/10.1016/j.matchar.2010.03.012
Zhou, Y.; Vuille, K.; Heel, A.; Probst, B.; Kontic, R.; Patzke, G. R. An inorganic hydrothermal route to photocatalytically active bismuth vanadate. Appl. Catal. A 2010, 375 (1), 140-148. https://doi.org/10.1016/j.apcata.2009.12.031
Zhou, Y.; Krumeich, F.; Heel, A.; Patzke, G. R. One-step hydrothermal coating approach to photocatalytically active oxide composites. Dalton Trans. 2010, 39 (26), 6043-6048. https://doi.org/10.1039/b926790e
de Hazan, Y.; Zimmermann, D.; Z'graggen, M.; Roos, S.; Aneziris, C.; Bollier, H.; Fehr, P.; Graule, T. Homogeneous electroless Ni-P/SiO2 nanocomposite coatings with improved wear resistance and modified wear behavior. Surf. Coat. Technol. 2010, 204 (21-22), 3464-3470. https://doi.org/10.1016/j.surfcoat.2010.04.007
de Hazan, Y.; Wozniak, M.; Heinecke, J.; Müller, G.; Graule, T. New microshaping concepts for ceramic/polymer nanocomposite and nanoceramic fibers. J. Am. Ceram. Soc. 2010, 93 (9), 2456-2459. https://doi.org/10.1111/j.1551-2916.2010.03802.x
de Hazan, Y.; Wozniak, M.; Heinecke, J.; Müller, G.; Märkl, V.; Graule, T. Shaping radiation curable colloidal dispersions – from polymer/ceramic fibers and microspheres to gradient porosity ceramic bulk materials. In Advanced processing and manufacturing technologies for structural and multifunctional materials IV, presented at the 34th international conference on advanced ceramics and composites. Advanced processing and manufacturing technologies for structural and multifunctional materials IV, Daytona Beach, FL, USA, January 24–29, 2010; Ohji, T., Singh, M., Mathur, S., Eds.; Ceramic engineering and science proceedings; Wiley, 2010; Vol. 31, pp 85-95.
van Garderen, N.; Clemens, F. J.; Scharf, D.; Graule, T. Investigation of sintering temperature on attrition resistance of highly porous diatomite based material. In Porous media and its applications in science, engineering and industry, presented at the Third international conference on porous media and its applications in science, engineering and industry, Montecatini, Italy, June 20–25, 2009; Vafai, K., Ed.; AIP conference proceedings; AIP Publishing: Melville, New York, 2010; Vol. 1254, pp 260-265. https://doi.org/10.1063/1.3453821
In-situ and operando probing of energy materials at multiscale down to single atomic column - the power of X-rays, neutrons and electron microscopy. Symposium held April 5-9, 2010, San Francisco, California, Symposium on in-situ and operando probing of energy materials at multiscale down to single atomic column - the power of X-rays, neutrons and electron microscopy, San Francisco, California, April 5-9, 2010; Wang, C., de Jonge, N., Dunin-Borkowski, R. E., Braun, A., Guo, J., Winans, R. E., Schober, H., Eds.; Materials research society symposium proceedings, Vol. 1262; MRS: Warrendale, PA, 2010; 153 p. https://www.cambridge.org/core/journals/mrs-online-proceedings-library-archive/volume/1FD5AA0F83074B3EB0E183521F0CBEB7
Materials in photocatalysis and photoelectrochemistry for environmental applications and H2 generation, Symposium S at the 2009 MRS spring meeting, San Francisco, California, USA, April 13-17, 2009; Braun, A., Alivisatos, P. A., Figgemeier, E., Turner, J. A., Ye, J., Chandler, E. A., Eds.; Materials research society symposium proceedings, Vol. 1171; Curran Associates: Red Hook, 2010; 100 p. https://www.cambridge.org/core/journals/mrs-online-proceedings-library-archive/volume/E5F2E36EE0613A1C54AE3E6E4EA46A92
Aghdam, R. M. The effect of Ni substitution on electrical and magnetic properties of Sol-Gel derived LaSrFe-Oxide charge ordering perovskites. Master thesis, 2009, 121 p.
Allen, A. J.; Ilavsky, J.; Braun, A. Multi-scale microstructure characterization of solid oxide fuel cell assemblies with ultra small-angle X-ray scattering. Adv. Eng. Mater. 2009, 11 (6), 495-501. https://doi.org/10.1002/adem.200800357
Alves, A. K.; Berutti, F. A.; Clemens, F. J.; Graule, T.; Bergmann, C. P. Photocatalytic activity of titania fibers obtained by electrospinning. Mater. Res. Bull. 2009, 44 (2), 312-317. https://doi.org/10.1016/j.materresbull.2008.06.001
Alves, A. K.; Berutti, F. A.; Clemens, F.; Graule, T.; Bergmann, C. P. The effect of heat treatment temperature on CeO2 and Y2O3 doped CeO2 electrospun fibers. Rev. Adv. Mater. Sci. 2009, 21 (2), 200-204. http://www.ipme.ru/e-journals/RAMS/no_22109/alves.html
Ari, M.; Metin, H.; Karaaslan, T.; Erat, S. Electron-phonon interactions and electron mobility of HEMT at low electron temperatures. Optoelectron. Adv. Mater. Rapid Commun. 2009, 3 (8), 771-775. https://oam-rc.inoe.ro/index.php?option=magazine&op=view&idu=778&catid=41
Bahraini, M.; Minghetti, T.; Zoellig, M.; Schubert, J.; Berroth, K.; Schelle, C.; Graule, T.; Kuebler, J. Activated pressureless infiltration of metal-matrix composites with graded activator content. Composites A 2009, 40 (10), 1566-1572. https://doi.org/10.1016/j.compositesa.2009.06.016
Bayraktar, D.; Diethelm, S.; Graule, T.; Van Herle, J.; Holtappels, P. Properties of B-site substituted La0.5Sr0.5FeO3-δ perovskites for application in oxygen separation membranes. J. Electroceram. 2009, 22 (1-3), 55-60. https://doi.org/10.1007/s10832-008-9428-z
Berutti, F. A.; Alves, A. K.; Bergmann, C. P.; Clemens, F. J.; Graule, T. Synthesis of CeO2 and Y2O3-doped CeO2 composite fibers by electrospinning. Part. Sci. Technol. 2009, 27 (3), 203-209. https://doi.org/10.1080/02726350902921681
Blugan, G.; Wittig, D.; Kuebler, J. Oxidation and corrosion of silicon nitride ceramics with different sintering additives at 1200 and 1500 °C in air, water vapour, SO2 and HCl environments - a comparative study. Corros. Sci. 2009, 51 (3), 547-555. https://doi.org/10.1016/j.corsci.2008.12.014
Braun, A. Comment on "Effects of native organic material and water on sorption properties of reference diesel soot". Environ. Sci. Technol. 2009, 43 (13), 5158-5159. https://doi.org/10.1021/es900943r
Braun, A.; Zhang, X.; Sun, Y.; Müller, U.; Liu, Z.; Erat, S.; Ari, M.; Grimmer, H.; Mao, S. S.; Graule, T. Correlation of high temperature x-ray photoemission valence band spectra and conductivity in strained LaSrFeNi oxide on SrTiO3(110). Appl. Phys. Lett. 2009, 95 (2), 022107 (3 pp.). https://doi.org/10.1063/1.3174916
Braun, A.; Bayraktar, D.; Erat, S.; Harvey, A. S.; Beckel, D.; Purton, J. A.; Holtappels, P.; Gauckler, L. J.; Graule, T. Pre-edges in oxygen (1s) x-ray absorption spectra: a spectral indicator for electron hole depletion and transport blocking in iron perovskites. Appl. Phys. Lett. 2009, 94 (20), 202102 (3 pp.). https://doi.org/10.1063/1.3122926
Braun, A.; Duval, S.; Ried, P.; Embs, J.; Juranyi, F.; Strässle, T.; Stimming, U.; Hempelmann, R.; Holtappels, P.; Graule, T. Proton diffusivity in the BaZr0.9Y0.1O3−δ proton conductor. J. Appl. Electrochem. 2009, 39 (4), 471-475. https://doi.org/10.1007/s10800-008-9667-3
Braun, A.; Kubatova, A.; Wirick, S.; Mun, S. B. Radiation damage from EELS and NEXAFS in diesel soot and diesel soot extracts. J. Electron Spectrosc. Relat. Phenom. 2009, 170 (1-3), 42-48. https://doi.org/10.1016/j.elspec.2007.08.002
Braun, A. Two-process model for the atmospheric weathering, oxidation and ageing of diesel soot. Geophys. Res. Lett. 2009, 36, L07810 (5 pp.). https://doi.org/10.1029/2008GL037077
Braun, A.; Ovalle, A.; Pomjakushin, V.; Cervellino, A.; Erat, S.; Stolte, W. C.; Graule, T. Yttrium and hydrogen superstructure and correlation of lattice expansion and proton conductivity in the BaZr0.9Y0.1O2.95 proton conductor. Appl. Phys. Lett. 2009, 95 (22), 224103 (3 pp.). https://doi.org/10.1063/1.3268454
Diethelm, S.; Bayraktar, D.; Graule, T.; Holtappels, P.; Van Herle, J. Improved stability of La0.5Sr0.5FeO3 by Ta-doping for oxygen separation membrane application. Solid State Ionics 2009, 180 (11-13), 857-860. https://doi.org/10.1016/j.ssi.2009.02.001
Dusza, J.; Blugan, G.; Morgiel, J.; Kuebler, J.; Inam, F.; Peijs, T.; Reece, M. J.; Puchy, V. Hot pressed and spark plasma sintered zirconia/carbon nanofiber composites. J. Eur. Ceram. Soc. 2009, 29 (15), 3177-3184. https://doi.org/10.1016/j.jeurceramsoc.2009.05.030
Duval, S. B. C.; Holtappels, P.; Vogt, U. F.; Stimming, U.; Graule, T. Characterisation of BaZr0.9Y0.1O3−δ prepared by three different synthesis methods: study of the sinterability and the conductivity. Fuel Cells 2009, 9 (5), 613-621. https://doi.org/10.1002/fuce.200800170
Duval, S. B. C.; Graule, T.; Holtappels, P.; Ouweltjes, J. P.; Rietveld, G. Evaluation of the perovskite (La0.8Sr0.2) 0.95Fe0.8Ni0.2O3-δ as SOFC cathode. Fuel Cells 2009, 9 (6), 911-914. https://doi.org/10.1002/fuce.200900154
Erat, S.; Braun, A.; Ovalle, A.; Piamonteze, C.; Liu, Z.; Graule, T.; Gauckler, L. J. Correlation of O (1s) and Fe (2p) near edge x-ray absorption fine structure spectra and electrical conductivity of La1-xSrxFe0.75Ni0.25O3-δ. Appl. Phys. Lett. 2009, 95 (17), 174108 (3 pp.). https://doi.org/10.1063/1.3246145
Feldhoff, A.; Martynczuk, J.; Arnold, M.; Myndyk, M.; Bergmann, I.; Šepelák, V.; Gruner, W.; Vogt, U.; Hähnel, A.; Woltersdorf, J. Spin-state transition of iron in (Ba0.5Sr0.5)(Fe0.8Zn0.2)O3-δ perovskite. J. Solid State Chem. 2009, 182 (11), 2961-2971. https://doi.org/10.1016/j.jssc.2009.07.058
Fostad, G.; Hafell, B.; Førde, A.; Dittmann, R.; Sabetrasekh, R.; Will, J.; Ellingsen, J. E.; Lyngstadaas, S. P.; Haugen, H. J. Loadable TiO2 scaffolds - a correlation study between processing parameters, micro CT analysis and mechanical strength. J. Eur. Ceram. Soc. 2009, 29 (13), 2773-2781. https://doi.org/10.1016/j.jeurceramsoc.2009.03.017
Haas, O.; Vogt, U. F.; Soltmann, C.; Braun, A.; Yoon, W. S.; Yang, X. Q.; Graule, T. The Fe K-edge X-ray absorption characteristics of La1-xSrxFeO3-δ prepared by solid state reaction. Mater. Res. Bull. 2009, 44 (6), 1397-1404. https://doi.org/10.1016/j.materresbull.2008.11.026
Heel, A.; Vital, A.; Holtappels, P.; Graule, T. Flame spray synthesis and characterisation of stabilised ZrO2 and CeO2 electrolyte nanopowders for SOFC applications at intermediate temperatures. J. Electroceram. 2009, 22 (1-3), 40-46. https://doi.org/10.1007/s10832-007-9384-z
Heiber, J.; Belloli, A.; Ermanni, P.; Clemens, F. Ferroelectric characterization of single PZT fibers. J. Intell. Mater. Syst. Struct. 2009, 20 (4), 379-385. https://doi.org/10.1177/1045389X08094365
Holzer, L.; Münch, B. Toward reproducible three-dimensional microstructure analysis of granular materials and complex suspensions. Microsc. Microanal. 2009, 15 (2), 130-146. https://doi.org/10.1017/S1431927609090163
Ismael, M. R.; Clemens, F.; Wyss, P.; Graule, T.; Hoffmann, M. J. Processing, microstructure and electromechanical properties of Pb(Zr, Ti)O3 fibers obtained by thermoplastic co-extrusion. In Proceedings of the 2009 18th IEEE international symposium on applications of ferroelectrics, presented at the 2009 18th IEEE international symposium on applications of ferroelectrics (ISAF 2009), Xi'an, China, August 23-27, 2009; Ren, W., Li, Z., Wei, X., Eds.; IEEE international symposium on applications of ferroelectrics (ISAF); IEEE, 2009; pp 109-112. https://doi.org/10.1109/ISAF.2009.5307603
Kubátová, A.; Lahren, T. J.; Beránek, J.; Smoliakova, I. P.; Braun, A.; Huggins, F. E. Extractable organic carbon and its differentiation by polarity in diesel exhaust, wood smoke, and urban particulate matter. Aerosol Sci. Technol. 2009, 43 (7), 714-729. https://doi.org/10.1080/02786820902889853
Kuebler, J. Failure analysis on a flowmeter. Presented at the 3rd international conference “fractography of advanced ceramics”, Stará Lesná, Slovakia, September 7-10, 2008; Dusza, J., Danzer, R., Morrell, R., Quinn, G. D., Eds.; Key engineering materials; Trans Tech Publications: sine loco; Vol. 409, pp 65-71. https://doi.org/10.4028/www.scientific.net/KEM.409.65
Luebbe, H.; Van herle, J.; Hofmann, H.; Bowen, P.; Aschauer, U.; Schuler, A.; Snijkers, F.; Schindler, H. J.; Vogt, U.; Lalanne, C. Cathode-supported micro-tubular SOFCs based on Nd1.95NiO 4+ δ: fabrication and characterisation of dip-coated electrolyte layers. Solid State Ionics 2009, 180 (11-13), 805-811. https://doi.org/10.1016/j.ssi.2009.01.010
Manukyan, K. V.; Kharatyan, S. L.; Blugan, G.; Kocher, P.; Kuebler, J. MoSi2-Si3N4 composites: influence of starting materials and fabrication route on electrical and mechanical properties. J. Eur. Ceram. Soc. 2009, 29 (10), 2053-2060. https://doi.org/10.1016/j.jeurceramsoc.2008.12.015
Michalow, K. A.; Heel, A.; Graule, T.; Rekas, M. Effect of cationic or anionic dopants on optical and photocatalytic properties of TiO2 nanopowders made by flame spray synthesis (FSS). In Symposium S – materials in photocatalysis and photoelectrochemistry for environmental applications and H2 generation, presented at the 2009 MRS spring meeting, San Francisco, California, April 13–17, 2009; Braun, A., Alivisatos, P. A., Figgemeier, E., Turner, J. A., Ye, J., Chandler, E. A., Eds.; Materials research society symposium proceedings; Materials Research Society: Warrendale, Pennsylvania, 2009; Vol. 1171, pp 1171-S02-05 (6 pp.). https://doi.org/10.1557/PROC-1171-S02-05
Michalow, K. A.; Heel, A.; Vital, A.; Amberg, M.; Fortunato, G.; Kowalski, K.; Graule, T. J.; Rekas, M. Effect of thermal treatment on the photocatalytic activity in visible light of TiO2-W flame spray synthesised nanopowders. Top. Catal. 2009, 52 (8), 1051-1059. https://doi.org/10.1007/s11244-009-9256-7
Michalow, K. A.; Logvinovich, D.; Weidenkaff, A.; Amberg, M.; Fortunato, G.; Heel, A.; Graule, T.; Rekas, M. Synthesis, characterization and electronic structure of nitrogen-doped TiO2 nanopowder. Catal. Today 2009, 144 (1-2), 7-12. https://doi.org/10.1016/j.cattod.2008.12.015
Michałów, K. A. Flame spray synthesis and characterisation of doped TiO2 nanoparticles for photoelectric and photocatalytic applications. Doctoral dissertation, Akademia Górniczo-Hutnicza im. Stanisława Staszica w Krakowie, 2009, 153 p.
Nurk, G.; Kubacki, A.; Holzer, L.; Figi, R.; Graule, T.; Holtappels, P. Influence of some inorganic impurities on the electrochemical properties and microstructure of Ni-CGO anode in artificial woodgas atmosphere. Presented at the 216th meeting of the electrochemical society, Vienna, Austria, October 4–9, 2009; Singhal, S. C., Yokokawa, H., Eds.; ECS transactions; The Electrochemical Society: Pennington, NJ; Vol. 25, pp 2117-2124. https://doi.org/10.1149/1.3205759
Pathak, S.; Steinmetz, D.; Kuebler, J.; Payzant, E. A.; Orlovskaya, N. Mechanical behavior of La0.8Sr0.2Ga0.8Mg0.2O3 perovskites. Ceram. Int. 2009, 35 (3), 1235-1241. https://doi.org/10.1016/j.ceramint.2008.06.013
Piekarczyk, W.; Wozniak, M.; Graule, T.; De Hazan, Y.; Kata, D.; Lis, J. Ultrasonication as a method for examination of glasses derived from UV curable nanosilica pastes. In Proceedings of the 11th international conference and exhibition of the European Ceramic Society, presented at the 11th international conference and exhibition of the European Ceramic Society, Krakow, June 21-25, 2009; Bućko, M. M., Ed.; Polish Ceramic Society: Kraków, 2009; pp 170-175.
Plesch, G.; Gorbár, M.; Vogt, U. F.; Jesenák, K.; Vargová, M. Reticulated macroporous ceramic foam supported TiO2 for photocatalytic applications. Mater. Lett. 2009, 63 (3-4), 461-463. https://doi.org/10.1016/j.matlet.2008.11.008
R. Ismael, M.; Clemens, F.; Bohac, W. M.; Graule, T.; Hoffmann, M. J. Effects of rheology on the interface of Pb(Zr, Ti)O3 monofilament composites obtained by co-extrusion. J. Eur. Ceram. Soc. 2009, 29 (14), 3015-3021. https://doi.org/10.1016/j.jeurceramsoc.2009.05.015
Radecka, M.; Jasiński, M.; Klich-Kafel, J.; Rekas, M.; Łysoń, B.; Czapla, A.; Lubecka, M.; Sokołowski, M.; Zakrzewska, K.; Heel, A.; et al. Tio2-based nanopowders for gas sensor. In Proceedings of the 11th ECERS Conference, Krakow, 2009, presented at the 11th international conference and exhibition of the European ceramic society 2009, Krakow, June 21-25, 2009; Polish Ceramic Society: Krakow, 2009; pp 697-701.
Richter, J.; Holtappels, P.; Graule, T.; Nakamura, T.; Gauckler, L. J. Materials design for perovskite SOFC cathodes. Monatsh. Chem. 2009, 140 (9), 985-999. https://doi.org/10.1007/s00706-009-0153-3
Rietveld, B.; van Berkel, F.; Zhang-Steenwinkel, Y.; Bouyer, E.; Irvine, J.; Menon, M.; Niewolak, L.; Gross, S.; Heel, A.; Holtappels, P.; et al. The integrated project SOFC600. Development of low-temperature SOFC. Presented at the 216th meeting of the electrochemical society, Vienna, Austria, October 4–9, 2009; Singhal, S. C., Yokokawa, H., Eds.; ECS transactions; The Electrochemical Society: Pennington, NJ; Vol. 25, pp 29-34. https://doi.org/10.1149/1.3205505
Saplinova, T.; Bakumov, V.; Gmeiner, T.; Wagler, J.; Schwarz, M.; Kroke, E. 2,5,8-trihydrazino-s-heptazine: a precursor for heptazine-based iminophosphoranes. Z. Anorg. Allg. Chem. 2009, 635 (15), 2480-2487. https://doi.org/10.1002/zaac.200900311
Sánchez, F. A. L.; Reifler, F. A.; Clemens, F.; Amico, S. C.; Bergmann, C. P. Obtenção de um revestimento compósito de poliéster-uretana reforçado com alumina pela técnica de deposição por imersão sobre fibras de poliamida 6. Ceramica 2009, 55 (336), 379-384. https://doi.org/10.1590/S0366-69132009000400007
Tinguely, J. C. Low-temperature roll-to-roll processing of a mesoporous metal oxide layer for dye-sensitized solar cells. Master thesis, 2009, 110 p.
Trenczek-Zajac, A.; Radecka, M.; Jasinski, M.; Michalow, K. A.; Rekas, M.; Kusior, E.; Zakrzewska, K.; Heel, A.; Graule, T.; Kowalski, K. Influence of Cr on structural and optical properties of TiO2:Cr nanopowders prepared by flame spray synthesis. J. Power Sources 2009, 194 (1), 104-111. https://doi.org/10.1016/j.jpowsour.2009.02.068
Vasić, S.; Grobéty, B.; Kuebler, J.; Graule, T. Activation mechanism and infiltration kinetic for pressureless melt infiltration of Ti activated AI2O3 preforms by high melting alloy. Adv. Eng. Mater. 2009, 11 (8), 659-666. https://doi.org/10.1002/adem.200900101
Veleva, L.; Oksiuta, Z.; Vogt, U.; Baluc, N. Sintering and characterization of W-Y and W-Y2O3 materials. Fusion Eng. Des. 2009, 84 (7-11), 1920-1924. https://doi.org/10.1016/j.fusengdes.2008.12.001
Vogt, U. F.; Holtappels, P.; Sfeir, J.; Richter, J.; Duval, S.; Wiedenmann, D.; Züttel, A. Influence of A-site variation and B-site substitution on the physical properties of (La,Sr)FeO3 based perovskites. Fuel Cells 2009, 9 (6), 899-906. https://doi.org/10.1002/fuce.200800116
Wittig, D.; Aneziris, C. G.; Graule, T.; Kuebler, J. Mechanical properties of three-dimensional interconnected alumina/steel metal matrix composites. J. Mater. Sci. 2009, 44 (2), 572-579. https://doi.org/10.1007/s10853-008-3072-5
Wozniak, M.; Graule, T.; de Hazan, Y.; Kata, D.; Lis, J. Highly loaded UV curable nanosilica dispersions for rapid prototyping applications. J. Eur. Ceram. Soc. 2009, 29 (11), 2259-2265. https://doi.org/10.1016/j.jeurceramsoc.2009.01.030
Wyss, P.; Hack, E.; Holtappels, P. Application of non-destructive testing to analyse SOFC cells and stacks. Fuel Cells 2009, 9 (6), 907-910. https://doi.org/10.1002/fuce.200900021
Zhou, Y.; Vuille, K.; Heel, A.; Patzke, G. R. Studies on nanostructured Bi2WO6: convenient hydrothermal and TiO2-coating pathways. Z. Anorg. Allg. Chem. 2009, 635 (12), 1848-1855. https://doi.org/10.1002/zaac.200900187
Zingg, A.; Winnefeld, F.; Holzer, L.; Pakusch, J.; Becker, S.; Figi, R.; Gauckler, L. Interaction of polycarboxylate-based superplasticizers with cements containing different C3A amounts. Cem. Concr. Compos. 2009, 31 (3), 153-162. https://doi.org/10.1016/j.cemconcomp.2009.01.005
de Hazan, Y.; Heinecke, J.; Weber, A.; Graule, T. High solids loading ceramic colloidal dispersions in UV curable media via comb-polyelectrolyte surfactants. J. Colloid Interface Sci. 2009, 337 (1), 66-74. https://doi.org/10.1016/j.jcis.2009.05.012
Akurati, K. K.; Vital, A.; Dellemann, J. P.; Michalow, K.; Graule, T.; Ferri, D.; Baiker, A. Flame-made WO3/TiO2 nanoparticles: relation between surface acidity, structure and photocatalytic activity. Appl. Catal. B 2008, 79 (1), 53-62. https://doi.org/10.1016/j.apcatb.2007.09.036
Alexander, B. D.; Kulesza, P. J.; Rutkowska, I.; Solarska, R.; Augustynski, J. Metal oxide photoanodes for solar hydrogen production. J. Mater. Chem. 2008, 20 (18), 2298-2303. https://doi.org/10.1039/B718644D
Azad, A. K.; Savaniu, C.; Tao, S.; Duval, S.; Holtappels, P.; Ibberson, R. M.; Irvine, J. T. S. Structural origins of the differing grain conductivity values in BaZr0.9Y0.1O2.95 and indication of novel approach to counter defect association. J. Mater. Chem. 2008, 18 (29), 3414-3418. https://doi.org/10.1039/b806190d
Bayraktar, D. La0.5Sr0.5Fe1-yMy03-δ (M = Ti, Ta) perovskite oxides for oxygen separation membranes. Doctoral dissertation, EPF Lausanne, Switzerland, 2008, 178 p.
Belloli, A.; Heiber, J.; Clemens, F.; Ermanni, P. Novel characterization procedure for single piezoelectric fibers. J. Intell. Mater. Syst. Struct. 2008, 20 (3), 355-363. https://doi.org/10.1177/1045389X08094366
Blugan, G.; Wittig, D.; Zinz, S.; Graule, T.; Kuebler, J. Oxidation and corrosion of silicon Nitride at 1200°C and 1500°C. Presented at the Fifth China international conference on high-performance ceramics (CICC-5), Changsha, China, May 10-13, 2007; Pan, W., Gong, J., Eds.; Key engineering materials; Trans Tech Publications: sine loco; Vol. 368-372, pp 885-887. https://doi.org/10.4028/www.scientific.net/KEM.368-372.885
Braun, A.; Richter, J.; Harvey, A. S.; Erat, S.; Infortuna, A.; Frei, A.; Pomjakushina, E.; Mun, B. S.; Holtappels, P.; Vogt, U.; et al. Electron hole-phonon interaction, correlation of structure, and conductivity in single crystal La0.9Sr0.1FeO3-δ. Appl. Phys. Lett. 2008, 93 (26), 262103 (3 pp.). https://doi.org/10.1063/1.3049614
Braun, A.; Janousch, M.; Sfeir, J.; Kiviaho, J.; Noponen, M.; Huggins, F. E.; Smith, M. J.; Steinberger-Wilckens, R.; Holtappels, P.; Graule, T. Molecular speciation of sulfur in solid oxide fuel cell anodes with X-ray absorption spectroscopy. J. Power Sources 2008, 183 (2), 564-570. https://doi.org/10.1016/j.jpowsour.2008.05.048
Braun, A.; Huggins, F. E.; Kubátová, A.; Wirick, S.; Maricq, M. M.; Mun, B. S.; McDonald, J. D.; Kelly, K. E.; Shah, N.; Huffman, G. P. Toward distinguishing woodsmoke and diesel exhaust in ambient particulate matter. Environ. Sci. Technol. 2008, 42 (2), 374-380. https://doi.org/10.1021/es071260k
Bucher, E.; Egger, A.; Ried, P.; Sitte, W.; Holtappels, P. Oxygen nonstoichiometry and exchange kinetics of Ba0.5Sr0.5Co0.8Fe0.2O3 − δ. Solid State Ionics 2008, 179 (21-26), 1032-1035. https://doi.org/10.1016/j.ssi.2008.01.089
Duszová, A.; Dusza, J.; Tomášek, K.; Blugan, G.; Kuebler, J. Microstructure and properties of carbon nanotube/zirconia composite. J. Eur. Ceram. Soc. 2008, 28 (5), 1023-1027. https://doi.org/10.1016/j.jeurceramsoc.2007.09.011
Duszová, A.; Dusza, J.; Tomášek, K.; Morgiel, J.; Blugan, G.; Kuebler, J. Zirconia/carbon nanofiber composite. Scr. Mater. 2008, 58 (6), 520-523. https://doi.org/10.1016/j.scriptamat.2007.11.002
Duval, S. B. C.; Holtappels, P.; Stimming, U.; Graule, T. Effect of minor element addition on the electrical properties of BaZr0.9Y0.1O3 − δ. Solid State Ionics 2008, 179 (21-26), 1112-1115. https://doi.org/10.1016/j.ssi.2007.11.030
Duval, S. Y-substituted barium zirconate, a proton conducting electrolyte for applications at intermediate temperatures. Doctoral dissertation, Technische Universität München, München, Deutschland, 2008, 138 p.
Erat, S.; Braun, A.; Zhang, X.; Sun, S. Y.; Liu, Z.; Frei, A.; Ari, M.; Mao, S. M.; Gauckler, L. J.; Graule, T. LaSrFeNi-oxide: a promising cathode material matching proton conductor specifications for intermediate temperature solid oxide fuel cells. In Smart energy strategies. Meeting the climate change challenge; Energy Science Center ETH Zurich, Ed.; Wirtschaft - Energie - Umwelt; vdf Hochschulverlag: Zürich, 2008; p 50. https://www.research-collection.ethz.ch/handle/20.500.11850/150605
Graule, T. Nanovir. Ein Virenfilter für sauberes Trinkwasser dank Nanotechnologie. VTA-Aktuell: Magazin des Vereins technischer Angestellter der Gas- und Wasserversorgungen, 2008, pp 26-27.
Heiber, J.; Clemens, F.; Graule, T.; Hülsenberg, D. Influence of varying the powder loading content on the homogeneity and properties of extruded PZT-fibers. Presented at the Fifth China international conference on high-performance ceramics (CICC-5), Changsha, China, May 10-13, 2007; Pan, W., Gong, J., Eds.; Key engineering materials; Trans Tech Publications: sine loco; Vol. 368-372, pp 11-14. https://doi.org/10.4028/www.scientific.net/KEM.368-372.11
Homma, S.; Uoi, Y.; Braun, A.; Koga, J.; Matsumoto, S. Reaction model for fluorination of uranium dioxide using improved unreacted shrinking core model for expanding spherical particles. J. Nucl. Sci. Technol. 2008, 45 (8), 823-827. https://doi.org/10.3327/jnst.45.823
Kozielski, L.; Piechowiak, M.; Czekaj, D.; Lisińska-Czekaj, A.; Smalarz, G.; Clemens, F.; Nowak, R. Mechanical examination of PZT microfibre defects structure. Phase Transit. 2008, 81 (11-12), 1081-1088. https://doi.org/10.1080/01411590802460668
Kübler, J.; Eblagon, F.; Graule, T.; Ehrle, B. Development of ceramic composites for industrial wood-cutting tools. In High-performance ceramics V, presented at the Fifth China international conference on high-performance ceramics (CICC-5), Changsha, China, May 10-13, 2007; Pan, W., Gong, J., Eds.; Key engineering materials; Trans Tech Publications: Baech, 2008; Vol. 368-372, pp 1062-1067. https://doi.org/10.4028/www.scientific.net/KEM.368-372.1062
Manukyan, K. V.; Aydinyan, S. V.; Kirakosyan, K. G.; Kharatyan, S. L.; Blugan, G.; Müller, U.; Kuebler, J. Molten salt-assisted combustion synthesis and characterization of MoSi2 and MoSi2-Si3N4 composite powders. Chem. Eng. J. 2008, 143 (1-3), 331-336. https://doi.org/10.1016/j.cej.2008.06.013
Mattmann, C.; Clemens, F.; Tröster, G. Sensor for measuring strain in textile. Sensors 2008, 8 (6), 3719-3732. https://doi.org/10.3390/s8063719
Metin, H.; Sat, F.; Erat, S.; Ari, M. Cadmium sulphide thin films grown by CBD: the effect of thermal annealing on the structural, electrical and optical properties. J. Optoelectron. Adv. Mater. 2008, 10 (10), 2622-2630. https://joam.inoe.ro/index.php?option=magazine&op=view&idu=1669&catid=31
Michalow, K. A.; Vital, A.; Heel, A.; Graule, T.; Reifler, F. A.; Ritter, A.; Zakrzewska, K.; Rekas, M. Photocatalytic activity of W-doped TiO2 nanopowders. J. Adv. Oxid. Technol. 2008, 11 (1), 56-64. https://doi.org/10.1515/jaots-2008-0107
Münch, B.; Holzer, L. Contradicting geometrical concepts in pore size analysis attaines with electron microscopy and mercury intrusion. J. Am. Ceram. Soc. 2008, 91 (12), 4059-4067. https://doi.org/10.1111/j.1551-2916.2008.02736.x
Orlovskaya, N.; Yarmolenko, S.; Sankar, J.; Kuebler, J.; Lugovy, M. Effects of rolling and hot pressing on mechanical properties of boron carbide-based ceramics. J. Mater. Sci. 2008, 43 (17), 5942-5947. https://doi.org/10.1007/s10853-008-2862-0
Orlovskaya, N.; Lugovy, M.; Pathak, S.; Steinmetz, D.; Lloyd, J.; Fegely, L.; Radovic, M.; Payzant, E. A.; Lara-Curzio, E.; Allard, L. F.; et al. Thermal and mechanical properties of LaCoO3 and La0.8Ca0.2CoO3 perovskites. J. Power Sources 2008, 182 (1), 230-239. https://doi.org/10.1016/j.jpowsour.2008.03.072
Peter, P.; Lorenz, C.; Brönstrup, A.; Graule, T.; Menzler, N. H.; Sitte, W.; Holtappels, P. Processing of YSZ screen printing pastes and the characterization of the electrolyte layers for anode supported SOFC. J. Eur. Ceram. Soc. 2008, 28 (9), 1801-1808. https://doi.org/10.1016/j.jeurceramsoc.2007.11.018
Richter, J. Mixed conducting ceramics for high temperature electrochemical devices. Doctoral dissertation, ETH Zürich, Switzerland, 2008, 111 p.
Richter, J.; Holtappels, P.; Graule, T.; Gauckler, L. J. Non-stoichiometry, thermal expansion and electrical properties of Pr1-xSrxMn1-yInyO3-δ perovskites. Solid State Ionics 2008, 179 (39), 2284-2289. https://doi.org/10.1016/j.ssi.2008.08.007
Richter, J.; Braun, A.; Harvey, A. S.; Holtappels, P.; Graule, T.; Gauckler, L. J. Valence changes of manganese and praseodymium in Pr1-xSrxMn1-yInyO3-δ perovskites upon cation substitution as determined with XANES and ELNES. Physica B 2008, 403 (1), 87-94. https://doi.org/10.1016/j.physb.2007.08.011
Ried, P.; Holtappels, P.; Wichser, A.; Ulrich, A.; Graule, T. Synthesis and Characterization of La0.6Sr0.4Co0.2Fe0.8O3−δ and Ba0.5Sr0.5Co0.8Fe0.2O3−δ. J. Electrochem. Soc. 2008, 155 (10), B1029-B1035. https://doi.org/10.1149/1.2960873
Rothmaier, M.; Luong, M. P.; Clemens, F. Textile pressure sensor made of flexible plastic optical fibers. Sensors 2008, 8 (7), 4318-4329. https://doi.org/10.3390/s8074318
Solarska, R.; Braun, A.; Augustynski, J. Nanostructured thin-film tungsten trioxide photoanodes for photoelectrolytic production of hydrogen from sea water. In Smart energy strategies. Meeting the climate change challenge; Energy Science Center ETH Zurich, Ed.; Wirtschaft - Energie - Umwelt; vdf Hochschulverlag: Zürich, 2008; p 125. https://www.research-collection.ethz.ch/handle/20.500.11850/150605
Vasić, S. Activation mechanism and kinetic study of Fe-based alloy infiltration into porous Al2O3/Ti preforms. Doctoral dissertation, Universität Freiburg, Switzerland, 2008, 100 p.
Vasić, S.; Grobéty, B.; Kuebler, J.; Kern, P.; Graule, T. Experimental models for activtation mechanism of pressureless infiltration in the non-wetting steel-alumina MMC system. Adv. Eng. Mater. 2008, 10 (5), 471-475. https://doi.org/10.1002/adem.200700342
Vaucher, S.; Kuebler, J.; Beffort, O.; Biasetto, L.; Zordan, F.; Colombo, P. Ceramic foam-reinforced Al-based micro-composites. Compos. Sci. Technol. 2008, 68 (15-16), 3202-3207. https://doi.org/10.1016/j.compscitech.2008.08.004
Vital, A.; Zürcher, S.; Dittmann, R.; Trottmann, M.; Lienemann, P.; Bommer, B.; Graule, T.; Apel, E.; Höland, W. Ultrafine comminution of dental glass in a stirred media mill. Chem. Eng. Sci. 2008, 63 (2), 484-494. https://doi.org/10.1016/j.ces.2007.09.027
Vogt, U. F.; Sfeir, J.; Richter, J.; Soltmann, C.; Holtappels, P. B-site substituted lanthanum strontium ferrites as electrode materials for electrochemical applications. Pure Appl. Chem. 2008, 80 (11), 2543-2552. https://doi.org/10.1351/pac200880112543
Wegmann, M.; Michen, B.; Luxbacher, T.; Fritsch, J.; Graule, T. Modification of ceramic microfilters with colloidal zirconia to promote the adsorption of viruses from water. Water Res. 2008, 42 (6-7), 1726-1734. https://doi.org/10.1016/j.watres.2007.10.030
Wegmann, M.; Michen, B.; Graule, T. Nanostructured surface modification of microporous ceramics for efficient virus filtration. J. Eur. Ceram. Soc. 2008, 28 (8), 1603-1612. https://doi.org/10.1016/j.jeurceramsoc.2007.11.002
Wittig, D.; Glauche, A.; Aneziris, C. G.; Minghetti, T.; Schelle, C.; Graule, T.; Kuebler, J. Activated pressureless melt infiltration of zirconia-based metal matrix composites. Mater. Sci. Eng. A 2008, 488 (1-2), 580-585. https://doi.org/10.1016/j.msea.2007.11.065
Wittig, D. Pressureless infiltrated alumina and zirconia based steel - MMCs. Doctoral dissertation, Technische Universität Bergakademie Freiberg, Germany, 2008, 91 p.
de Hazan, Y.; Werner, D.; Z'graggen, M.; Groteklaes, M.; Graule, T. Homogeneous Ni-P/Al2O3 nanocomposite coatings from stable dispersions in electroless nickel baths. J. Colloid Interface Sci. 2008, 328 (1), 103-109. https://doi.org/10.1016/j.jcis.2008.08.033
de Hazan, Y.; Reuter, T.; Werner, D.; Clasen, R.; Graule, T. Interactions and dispersion stability of aluminum oxide colloidal particles in electroless nickel solutions in the presence of comb polyelectrolytes. J. Colloid Interface Sci. 2008, 323 (2), 293-300. https://doi.org/10.1016/j.jcis.2008.03.036
Akurati, K. K.; Vital, A.; Reifler, F.; Ritter, A.; Graule, T. Flame spray synthesis of visible light active nanocrystalline bismuth oxide based photocatalysts. Presented at the 2007 NSTI Nanotechnology Conference and Trade Show - NSTI Nanotech 2007, May 20-24, 2007; 2007 NSTI Nanotechnology Conference and Trade Show - NSTI Nanotech 2007, Technical Proceedings; Vol. 4, pp 173-176.
Akurati, K. K.; Vital, A.; Fortunato, G.; Hany, R.; Nueesch, F.; Graule, T. Flame synthesis of TiO2 nanoparticles with high photocatalytic activity. Solid State Sci. 2007, 9 (3-4), 247-257. https://doi.org/10.1016/j.solidstatesciences.2006.12.004
Barna, E.; Rentsch, D.; Bommer, B.; Vital, A.; von Trzebiatowski, O.; Graule, T. Surface modification of nanoparticles for scratch resistant clear coatings. KGK Kautsch. Gummi Kunstst. 2007, 60 (1-2), 49-51.
Bayraktar, D.; Clemens, F.; Diethelm, S.; Graule, T.; Van herle, J.; Holtappels, P. Production and properties of substituted LaFeO3-perovskite tubular membranes for partial oxidation of methane to syngas. J. Eur. Ceram. Soc. 2007, 27 (6), 2455-2461. https://doi.org/10.1016/j.jeurceramsoc.2006.10.004
Beffort, O.; Long, S.; Cayron, C.; Kuebler, J.; Buffat, P. A. Alloying effects on microstructure and mechanical properties of high volume fraction SiC-particle reinforced Al-MMCs made by squeeze casting infiltration. Compos. Sci. Technol. 2007, 67 (3-4), 737-745. https://doi.org/10.1016/j.compscitech.2006.04.005
Belloli, A.; Heiber, J.; Clemens, F.; Ermanni, P. Novel characterization procedure for single piezoelectric fibers. In 18th international conference on adaptive structures and technologies. ICAST 2007, presented at the 18th international conference on adaptive structures and technologies, ICAST 2007, Ottawa, October 3-5, 2007; Carleton University - 18th International Conference on Adaptive Structures and Technologies, ICAST 2007; Cussan Associates: Red Hook, 2007; pp 506-518.
Blugan, G.; Kuebler, J.; Bissig, V.; Janczak-Rusch, J. Brazing of silicon nitride ceramic composite to steel using SiC-particle-reinforced active brazing alloy. Ceram. Int. 2007, 33 (6), 1033-1039. https://doi.org/10.1016/j.ceramint.2006.03.010
Blugan, G.; Morawa, K.; Koebel, S.; Graule, T.; Kuebler, J. Development of a tape casting process for making thin layers of Si3N4 and Si3N4 + TiN. J. Eur. Ceram. Soc. 2007, 27 (16), 4789-4795. https://doi.org/10.1016/j.jeurceramsoc.2007.02.211
Braun, A.; Mun, B. S.; Huggins, F. E.; Huffman, G. P. Carbon speciation of diesel exhaust and urban particulate matter NIST standard reference materials with C(1s) NEXAFS spectroscopy. Environ. Sci. Technol. 2007, 41 (1), 173-178. https://doi.org/10.1021/es061044w
Braun, A.; Wang, H.; Shim, J.; Lee, S. S.; Cairns, E. J. Lithium K(1s) synchrotron NEXAFS spectra of lithium-ion battery cathode, anode and electrolyte materials. J. Power Sources 2007, 170 (1), 173-178. https://doi.org/10.1016/j.jpowsour.2007.04.022
Bruehlmann, S.; Novak, P.; Lienemann, P.; Trottmann, M.; Gfeller, U.; Zwicky, C. N.; Bommer, B.; Huber, H.; Wolfensberger, M.; Heeb, N. V. Three-way-catalyst induced benzene formation: a precursor study. Appl. Catal. B 2007, 70 (1-4), 276-283. https://doi.org/10.1016/j.apcatb.2006.02.026
Clemens, F. J.; Wallquist, V.; Buchser, W.; Wegmann, M.; Graule, T. Silicon carbide fiber-shaped microtools by extrusion and sintering SiC with and without carbon powder sintering additive. Ceram. Int. 2007, 33 (3), 491-496. https://doi.org/10.1016/j.ceramint.2005.10.015
Clemens, F.; Heiber, J.; Ismael, M. R.; Paradies, R.; Graule, T.; Piechowiak, M.; Kozielsk, L.; Czekaj, D. The influence of the sintering atmosphere and the fibre geometry on the piezoelectric properties of PZT single fibres and AFC structures. Presented at the International symposium on piezocomposite applications - ISPA 2007. Volkswagen „Die gläserne Manufaktur“, Dresden, Germany, September 27-28, 2007; p (10 pp.).
Clemens, F. Thermoplastic extrusion for ceramic bodies. In Extrusion in ceramics; Händle, F., Ed.; Engineering materials and processes; Springer: Berlin, 2007; pp 323-344. https://doi.org/10.1007/978-3-540-27102-4_17
Dimopoulos, P.; Bach, C.; Vogt, U. F.; Herrmann, K. Ceramic foams as catalyst substrates: pre-catalyst application homogenising the exhaust flow upstream of aftertreatment devices. Presented at the 8th international conference on engines for automobiles (ICE 2007), Capri, Italy, September 16–20, 2007; SAE technical paper series; SAE International: sine loco; pp 2007-24-0097 (15 pp.). https://doi.org/10.4271/2007-24-0097
Duval, S. B. C.; Holtappels, P.; Vogt, U. F.; Pomjakushina, E.; Conder, K.; Stimming, U.; Graule, T. Electrical conductivity of the proton conductor BaZr0.9Y0.1O3-δ obtained by high temperature annealing. Solid State Ionics 2007, 178 (25-26), 1437-1441. https://doi.org/10.1016/j.ssi.2007.08.006
Eblagon, F.; Ehrle, B.; Graule, T.; Kuebler, J. Development of silicon nitride/silicon carbide composites for wood-cutting tools. J. Eur. Ceram. Soc. 2007, 27 (1), 419-428. https://doi.org/10.1016/j.jeurceramsoc.2006.02.040
Farshad, M.; Clemens, F.; Le Roux, M. Magnetoactive polymer composite fibers and fabrics - Processing and mechanical characterization. J. Thermoplast. Compos. Mater. 2007, 20 (1), 65-74. https://doi.org/10.1177/0892705707070442
Guo, Z.; Blugan, G.; Kirchner, R.; Reece, M.; Graule, T.; Kuebler, J. Microstructure and electrical properties of Si3N4-TiN composites sintered by hot pressing and spark plasma sintering. Ceram. Int. 2007, 33 (7), 1223-1229. https://doi.org/10.1016/j.ceramint.2006.03.029
Guo, Z.; Blugan, G.; Graule, T.; Reece, M.; Kuebler, J. The effect of different sintering additives on the electrical and oxidation properties of Si3N4-MoSi2 composites. J. Eur. Ceram. Soc. 2007, 27 (5), 2153-2161. https://doi.org/10.1016/j.jeurceramsoc.2006.07.009
Guo, Z.; Parlinska-Wojtan, M.; Blugan, G.; Graule, T.; Reece, M. J.; Kuebler, J. The influence of the grain boundary phase on the mechanical properties of Si3N4-MoSi2 composites. Acta Mater. 2007, 55 (8), 2875-2884. https://doi.org/10.1016/j.actamat.2006.12.026
Healy, T.; Papadas, C.; Venios, N.; Clemens, F.; Wegmann, M.; Winkler, D.; Ullsperger, A.; Hartmann, W.; O'Neill, B.; Donnelly, J.; et al. Electronically functional fibre technology development for ambient intelligence. In The disappearing computer. Interaction design, system infrastructures and applications for smart environments, presented at the Streitz, N., Kameas, A., Mavrommati, I., Eds.; Lecture notes in computer science; Springer: Berlin, 2007; Vol. 4500, pp 255-274. https://doi.org/10.1007/978-3-540-72727-9_12
Heiber, J. Einige Möglichkeiten zur Beeinflussung der Struktur und der Eigenschaften von PZT-Keramik-Fasern. Doctoral dissertation, Technische Universität Ilmenau, Germany, 2007, 126 p.
Heiber, J.; Clemens, F.; Helbig, U.; de Meuron, A.; Soltmann, C.; Graule, T.; Hülsenberg, D. Properties of Pb(Zr, Ti)O3 fibres with a radial gradient structure. Acta Mater. 2007, 55 (19), 6499-6506. https://doi.org/10.1016/j.actamat.2007.08.004
Herzog, A.; Woetting, G.; Vogt, U. F. Short-fibre-reinforced reaction-bonded silicon nitride (RBSN) by precursor route: processing and properties. J. Eur. Ceram. Soc. 2007, 27 (12), 3561-3572. https://doi.org/10.1016/j.jeurceramsoc.2006.08.021
Holtappels, P.; Braun, A.; Thünemann, M.; Vogt, U. Characterisation of mixed conducting La-Sr-Fe perovskites for application in solid oxide fuel cells. In Solid oxide fuel cells 10 (SOFC-X), presented at the 10th international symposium on solid oxide fuel cells (SOFC-X), Nara, Japan, June 3–8, 2007; Eguchi, K., Singhal, S. C., Yokokawa, H., Mizusaki, J., Eds.; ECS Transactions; The Electrochemical Society: Pennington, NJ, 2007; Vol. 7, pp 1025-1031. https://doi.org/10.1149/1.2729198
Holzer, L.; Gasser, P.; Kaech, A.; Wegmann, M.; Zingg, A.; Wepf, R.; Münch, B. Cryo-FIB-nanotomography for quantitative analysis of particle structures in cement suspensions. J. Microsc. 2007, 227 (3), 216-228. https://doi.org/10.1111/j.1365-2818.2007.01804.x
Katsikis, N.; Zahradnik, F.; Helmschrott, A.; Münstedt, H.; Vital, A. Thermal stability of poly(methyl methacrylate)/silica nano- and microcomposites as investigated by dynamic-mechanical experiments. Polym. Degrad. Stab. 2007, 92 (11), 1966-1976. https://doi.org/10.1016/j.polymdegradstab.2007.08.009
Kuebler, J.; Blugan, G.; Lugovy, M.; Slyunyayev, V.; Orlovskaya, N.; Dobedoe, R. Development of failure tolerant multi-layer silicon nitride ceramics: review from macro to micro layered structures. In Functional gradient ceramics, and thermal barriers; Anglada, M., Ed.; Key engineering materials, Vol. 333; Trans Tech Publications: Baech, 2007; pp 117-126. https://doi.org/10.4028/www.scientific.net/KEM.333.117
Kuebler, J.; Blugan, G.; Jelitto, H.; Schneider, G. A.; Dobedoe, R. Structural micro-layered ceramics with surfaces under tension and compression with increasing apparent fracture toughness. Presented at the 4th China international conference on high-performance ceramics (CICC-4), Chengdu, China, October 23-26, 2005; Pan, W., Gong, J., Eds.; Key engineering materials; Trans Tech Publications: sine loco; Vol. 336-338, pp 2564-2568. https://doi.org/10.4028/www.scientific.net/KEM.336-338.2564
Lemster, K.; Delporte, M.; Graule, T.; Kuebler, J. Activation of alumina foams for fabricating MMCs by pressureless infiltration. Ceram. Int. 2007, 33 (7), 1179-1185. https://doi.org/10.1016/j.ceramint.2006.04.002
Manukyan, K. V.; Kharatyan, S. L.; Blugan, G.; Kuebler, J. Combustion synthesis and compaction of Si3N4-TiN composite powder. Ceram. Int. 2007, 33 (3), 379-383. https://doi.org/10.1016/j.ceramint.2005.10.006
Radice, S.; Kern, P.; Dietsch, H.; Dittmann, R.; Michler, J.; Mischler, S. Bio-coatings with controlled porosity by electrophoretic deposition of TiO2-polystyrene composite particles. Presented at the 21st European conference on biomaterials (ESB 2007), Brighton, UK, September 9-13, 2007.
Reifler, F. A.; Ritter, A.; Fortunato, G.; Vital, A.; Akurati, K. K.; Hufenus, R. Towards a photocatalytic fiber for degradation of malodor. In Proceedings of the fiber society fall conference 2007, presented at the Fiber society fall conference, Davis, California, United States, 9-11th October, 2007; 2007; p (2 pp.).
Ried, P.; Bucher, E.; Preis, W.; Sitte, W.; Holtappels, P. Characterisation of la0.6Sr0.4Co0.2Fe 0.8O3-δ and Ba0.5Sr0.5Co 0.8Fe0.2O3-δ as cathode materials for the application in intermediate temperature fuel cells. In 10th international symposium on solid oxide fuel cells (SOFC-X) S. Singhal, H. Yokokawa, presented at the 10th international symposium on solid oxide fuel cells (SOFC-X), Nara, Japan, June 3-8, 2007; Eguchi, K., Mizusaki, J., Singhal, S., Yokokawa, H., Eds.; ECS Transactions; IOP: sine loco, 2007; Vol. 7, pp 1217-1224. https://doi.org/10.1149/1.2729221
Rosten, R.; Swanson, M.; Kuebler, J.; Kapat, J.; Orlovskaya, N. Characterization of (La0.9Sr0.1)0.95Cr0.85Mg0.1Ni0.05O3 perovskite ceramics for a perovskite related membrane reactor. In Symposium AA – solid-state ionics – 2006, presented at the 2006 MRS fall meeting, Boston, Massachusetts, November 27–December 1, 2006; Traversa, E., Armstrong, T. R., Masquelier, C., Sadaoka, Y., Eds.; Materials research society symposium proceedings; Materials Research Society: Warrendale, Pennsylvania, 2007; Vol. 972, pp 0972-AA02-07 (6 pp.). https://doi.org/10.1557/PROC-0972-AA02-07
Steinberger-Wilckens, R.; Tietz, F.; Smith, M. J.; Mougin, J.; Rietveld, B.; Bucheli, O.; Van Herle, J.; Rosenberg, R.; Zahid, M.; Holtappels, P. Real-SOFC - A joint European effort in understanding SOFC degradation. In 10th international symposium on solid oxide fuel cells (SOFC-X), presented at the 10th international symposium on solid oxide fuel cells (SOFC-X), Nara, Japan, June 3-8, 2007; Eguchi, K., Mizusaki, J., Singhal, S., Yokokawa, H., Eds.; ECS transactions; IOP Publishing: sine loco, 2007; Vol. 7, pp 67-76. https://doi.org/10.1149/1.2729075
Tangtrakarn, N.; Swanson, M.; Moran, P.; Kuebler, J.; Kapat, J.; Orlovskaya, N. Sintering behavior and phase characterisation of composite perovskite/fluorite ceramics for intermediate temperature SOFCs and oxygen separation membranes. In Symposium AA – solid-state ionics – 2006, presented at the 2006 MRS fall meeting, Boston, Massachusetts, November 27–December 1, 2006; Traversa, E., Armstrong, T. R., Masquelier, C., Sadaoka, Y., Eds.; Materials research society symposium proceedings; Materials Research Society: Warrendale, Pennsylvania, 2007; Vol. 972, pp 0972-AA03-07 (6 pp.). https://doi.org/10.1557/PROC-0972-AA03-07
Thènemann, M.; Beffort, O.; Kleiner, S.; Vogt, U. Aluminum matrix composites based on preceramic-polymer-bonded SiC preforms. Compos. Sci. Technol. 2007, 67 (11-12), 2377-2383. https://doi.org/10.1016/j.compscitech.2007.01.001
Vasić, S.; Grobéty, B.; Kuebler, J.; Graule, T.; Baumgartner, L. X-ray computed micro tomography as complementary method for the characterization of activated porous ceramic preforms. J. Mater. Res. 2007, 22 (5), 1414-1424. https://doi.org/10.1557/JMR.2007.0181
Vital, A.; Angermann, A.; Dittmann, R.; Graule, T.; Töpfer, J. Highly sinter-active (Mg-Cu)-Zn ferrite nanoparticles prepared by flame spray synthesis. Acta Mater. 2007, 55 (6), 1955-1964. https://doi.org/10.1016/j.actamat.2006.11.002
Vital, A.; Richter, J.; Figi, R.; Nagel, O.; Aneziris, C. G.; Bernardi, J.; Graule, T. One-step flame synthesis of ultrafine SiO2-C nanocomposite particles with high carbon loading and their carbothermal conversion. Ind. Eng. Chem. Res. 2007, 46 (12), 4273-4281. https://doi.org/10.1021/ie061374p
Vogt, U. F.; Györfy, L.; Herzog, A.; Graule, T.; Plesch, G. Macroporous silicon carbide foams for porous burner applications and catalyst supports. J. Phys. Chem. Solids 2007, 68 (5-6), 1234-1238. https://doi.org/10.1016/j.jpcs.2006.12.008
Wegmann, M.; Brönnimann, R.; Clemens, F.; Graule, T. Barium titanate-based PTCR thermistor fibers: processing and properties. Sens. Actuators A 2007, 135 (2), 394-404. https://doi.org/10.1016/j.sna.2006.08.008
Akurati, K. K.; Dittmann, R.; Vital, A.; Klotz, U.; Hug, P.; Graule, T.; Winterer, M. Silica-based composite and mixed-oxide nanoparticles from atmospheric pressure flame synthesis. J. Nanopart. Res. 2006, 8 (3-4), 379-393. https://doi.org/10.1007/s11051-005-9024-y
Akurati, K. K.; Vital, A.; Klotz, U. E.; Bommer, B.; Graule, T.; Winterer, M. Synthesis of non-aggregated titania nanoparticles in atmospheric pressure diffusion flames. Powder Technol. 2006, 165 (2), 73-82. https://doi.org/10.1016/j.powtec.2006.03.019
Bayraktar, D.; Diethelm, S.; Holtappels, P.; Graule, T.; Van herle, J. Oxygen transport in La0.5Sr0.5Fe1-yTiyO3-δ (y=0.0, 0.2) membranes. J. Solid State Electrochem. 2006, 10 (8), 589-596. https://doi.org/10.1007/s10008-006-0133-z
Blugan, G.; Dobedoe, R.; Lugovy, M.; Koebel, S.; Kuebler, J. Si3N4-TiN based micro-laminates with rising R-curve behaviour. Composites B 2006, 37 (6), 459-465. https://doi.org/10.1016/j.compositesb.2006.02.013
Boukamp, B. A.; Verbraeken, M.; Blank, D. H. A.; Holtappels, P. SOFC-anodes, proof for a finite-length type Gerischer impedance? Solid State Ionics 2006, 177 (26-32), 2539-2541. https://doi.org/10.1016/j.ssi.2006.03.002
Braun, A. Comment on "Studies on nanoporous glassy carbon as a new electrochemical capacitor material [Y. Wen, G. Cao, Y. Yang, J. Power Sources 148 (2005) 121-128]. J. Power Sources 2006, 160 (1), 762-763. https://doi.org/10.1016/j.jpowsour.2006.03.083
Braun, A.; Huggins, F. E.; Kelly, K. E.; Mun, B. S.; Ehrlich, S. N.; Huffman, G. P. Impact of ferrocene on the structure of diesel exhaust soot as probed with wide-angle X-ray scattering and C(1s) NEXAFS spectroscopy. Carbon 2006, 44 (14), 2904-2911. https://doi.org/10.1016/j.carbon.2006.05.051
Braun, A.; Wirick, S.; Kubátová, A.; Mun, B. S.; Huggins, F. E. Photochemically induced decarboxylation in diesel soot extracts. Atmos. Environ. 2006, 40 (30), 5837-5844. https://doi.org/10.1016/j.atmosenv.2006.05.024
Braun, A. Some comments on "Soot surface area evolution during air oxidation as evaluated by small angle X-ray scattering and CO2 adsorption". Carbon 2006, 44 (7), 1313-1315. https://doi.org/10.1016/j.carbon.2005.12.034
Dumont, T.; Lippert, T.; Döbeli, M.; Grimmer, H.; Ufheil, J.; Novák, P.; Würsig, A.; Vogt, U.; Wokaun, A. Influence of experimental parameter on the Li-content of LiMn2O4 electrodes produced by pulsed laser deposition. Appl. Surf. Sci. 2006, 252 (13), 4902-4906. https://doi.org/10.1016/j.apsusc.2005.07.119
Guo, Z. Development of Si3N4-based composites for high temperature sensor application. Doctoral dissertation, University of London, UK, 2006, 165 p.
Hadad, M.; Blugan, G.; Kübler, J.; Rosset, E.; Rohr, L.; Michler, J. Tribological behaviour Of Si3N4 and Si3N4-%TiN based composites and multi-layer laminates. Wear 2006, 260 (6), 634-641. https://doi.org/10.1016/j.wear.2005.03.027
Hammes, K.; Smernik, R. J.; Skjemstad, J. O.; Herzog, A.; Vogt, U. F.; Schmidt, M. W. I. Synthesis and characterisation of laboratory-charred grass straw (Oryza sativa) and chestnut wood (Castanea sativa) as reference materials for black carbon quantification. Org. Geochem. 2006, 37 (11), 1629-1633. https://doi.org/10.1016/j.orggeochem.2006.07.003
Heiber, J.; Clemens, F.; Graule, T.; Hülsenberg, D. Influence of the fibre diameter on the microstructure and the piezoelectric properties of PZT-fibres. Presented at the 11th international ceramics congress, Acireale, Sicily, Italy, June 4-9, 2006; Vincenzini, P., Ed.; Advances in science and technology; Trans Tech Publications; Vol. 45, pp 2459-2463. https://doi.org/10.4028/www.scientific.net/AST.45.2459
Herzog, A.; Vogt, U. F.; Siegmann, S.; Beffort, O. Aluminium metal matrix composites based on biomorphic silicon carbide. Adv. Eng. Mater. 2006, 8 (10), 980-983. https://doi.org/10.1002/adem.200600121
Herzog, A.; Vogt, U.; Kaczmarek, O.; Klingner, R.; Richter, K.; Thoemen, H. Porous SiC ceramics derived from tailored wood-based fiberboards. J. Am. Ceram. Soc. 2006, 89 (5), 1499-1503. https://doi.org/10.1111/j.1551-2916.2006.00922.x
Herzog, A.; Reznik, B.; Chen, T.; Graule, T.; Vogt, U. Structural changes in activated wood-based carbons: correlation between specific surface area and localization of molecular-sized pores. Holzforschung 2006, 60 (1), 85-92. https://doi.org/10.1515/Hf.2006.015
Holtappels, P.; Verbraeken, M.; Vogt, U.; Blank, D. H. A.; Boukamp, B. A. Preparation and electrochemical characterisation of supporting SOFC-Ni-YZT anodes. Solid State Ionics 2006, 177 (19-25), 2029-2032. https://doi.org/10.1016/j.ssi.2006.06.018
Holtappels, P.; Sorof, C.; Verbraeken, M. C.; Rambert, S.; Vogt, U. Preparation of porosity-graded SOFC anode substrates. Fuel Cells 2006, 6 (2), 113-116. https://doi.org/10.1002/fuce.200500116
Holzer, L.; Muench, B.; Wegmann, M.; Gasser, P.; Flatt, R. J. FIB-Nanotomography of particulate systems - Part I: Particle shape and topology of interfaces. J. Am. Ceram. Soc. 2006, 89 (8), 2577-2585. https://doi.org/10.1111/j.1551-2916.2006.00974.x
Holzer, L.; Muench, B.; Leemann, A.; Gasser, P. Quantification of capillary porosity in cement paste using high resolution 3D-microscopy: potential and limitations of FIB-nanotomography. In 2nd international symposium on advances in concrete through science and engineering, presented at the 2nd international symposium on advances in concrete through science and engineering, Québec City, Canada, September 11-13, 2006; Marchand, J., Bissonnette, B., Gagné, R., Jolin, M., Paradis, F., Eds.; RILEM proceedings; RILEM Publications S.A.R.L.: Cachan, France, 2006; p (13 pp.).
Leemann, A.; Münch, B.; Gasser, P.; Holzer, L. Influence of compaction on the interfacial transition zone and the permeability of concrete. Cem. Concr. Res. 2006, 36 (8), 1425-1433. https://doi.org/10.1016/j.cemconres.2006.02.010
Lemster, K.; Graule, T.; Minghetti, T.; Schelle, C.; Kuebler, J. Mechanical and machining properties of X38CrMoV5-1/Al2O3 metal matrix composites and components. Mater. Sci. Eng. A 2006, 420 (1-2), 296-305. https://doi.org/10.1016/j.msea.2006.01.039
Melnykowycz, M.; Martinez, M.; Nitzsche, F.; Barbezat, M.; Artemev, A. Acitve airfoil design and finite element analysis of smart structures for rotor blade applications. In 16th international conference on adaptive structures and technologies (ICAST), presented at the 16th international conference on adaptive structures and technologies (ICAST), Paris, France, October 9-12, 2005; Bernadou, M., Cagnol, J., Ohayon, R., Eds.; DEStech publickations, Inc.: Lancaster, Pennsylvania, USA, 2006; pp 182-189.
Orlovskaya, N.; Lugovy, M.; Kuebler, J.; Yarmolenko, S.; Sankar, J. Design of tough ceramic laminates by residual stresses control. In Ceramic matrix composites. Microstructure, properties and applications; Low, I. M., Ed.; Woodhead Publishing; CRC Press: Cambridge; Boca Raton, 2006; pp 178-215. https://doi.org/10.1533/9781845691066.2.178
Orlovskaya, N.; Lugovy, M.; Ko, F.; Yarmolenko, S.; Sankar, J.; Kuebler, J. SiC/SiCwoven fabric laminates: design, manufacturing, mechanical properties. Composites B 2006, 37 (6), 524-529. https://doi.org/10.1016/j.compositesb.2006.02.022
Richter, J.; Holtappels, P.; Vogt, U.; Graule, T.; Gauckler, L. J. Conduction behavior of Pr1-xSrxMn1-yInyO3-δ perovskites. Solid State Ionics 2006, 177 (35-36), 3105-3108. https://doi.org/10.1016/j.ssi.2006.07.035
Varga, K.; Reifler, F. A.; Clemens, F. Dip coating of fibers with ceramic particles. Presented at the 37th international symposium on novelties in textiles, Ljubljana, Slovenia, June 15-17, 2006; pp 1-5.
Wegmann, M.; Clemens, F.; Hendry, A.; Graule, T. Dispersion of lanthanoid-coated barium titanate in a paraffin-based extrusion binder system. Ceram. Int. 2006, 32 (2), 147-156. https://doi.org/10.1016/j.ceramint.2005.01.011
Braun, A. Carbon speciation in airborne particulate matter with C (1s) NEXAFS spectroscopy. J. Environ. Monit. 2005, 7 (11), 1059-1065. https://doi.org/10.1039/b508910g
Braun, A.; Ilavsky, J.; Seifert, S.; Jemian, P. R. Deformation of diesel soot aggregates as a function of pellet pressure: A study with ultra-small-angle x-ray scattering. J. Appl. Phys. 2005, 98 (7), 073513 (5 pp.). https://doi.org/10.1063/1.2071456